uses it)
Tested-by: Nikita Kiryanov nik...@compulab.co.il
Tested on am437x-gp-evm with WL1835MODCOM8B
--
Regards,
Nikita Kiryanov
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
Add support for TPS65218 LS3 current regulator, which is capable of 4
current input limit modes: 100, 200, 500, and 1000 uA.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Liam Girdwood <lgirdw...@gmail.com>
Cc: Mark Brown <b
On Wed, Nov 25, 2015 at 05:03:00PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:19:02PM +0200, Nikita Kiryanov wrote:
> > Add basic support for SBC-T43: a CM-T43 based single board computer.
> > CM-T43 is an AM437x based System-on-Module designed to serve as a bui
On Wed, Nov 25, 2015 at 04:57:34PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:19:13PM +0200, Nikita Kiryanov wrote:
> > CompuLab SB-SOM baseboard is a carrier board for multiple arm-based SoMs.
> > It currently supports (with minor adjustments to assembly) CM-T43, CM-
CM-T43 comes with 2 ethernet ports connected to the cpsw subsystem, which
has 2 modes of operation: switch mode and dual emac mode.
Add the relevant muxing and set it up to work in dual emac mode by
default.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Acked-by: Mugunthan V N <
Add PMIC support for CompuLab cm-t43 module. For now we keep all regulators
enabled until this could be refined with power management support.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
to startek,startek-kd050c.txt
- s/QS-600/CM-QS600 in compulab-boards.txt
- Changed subject lines to start with "ARM: dts:"
Nikita Kiryanov (14):
ARM: dts: am437x: cm-t43: add basic support for sbc-t43
ARM: dts: am437x: cm-t43: add support for module eeprom
ARM: dts: a
Add USB support for CompuLab sbc-t43 single board computer,
defaulting to host mode.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland &
SB-SOM comes with a PCA9555 GPIO extender. On SBC-T43 this resides on the
i2c1 bus. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.
CM-T43 has an on-board 2MB SPI-flash which stores U-Boot and the U-Boot
environment. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.
-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: Pawel Moll <pawel.m...@arm.com>
Cc: Igor Grinberg <grinb...@com
.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Acked-by: Rob Herring <r...@kernel.org>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: Pawel Moll &l
Add the necessary dss configuration to drive the startek lcd on CompuLab
sbc-t43 single board computer.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.
One of the CompuLab cm-t43 configurations comes with on-board NAND flash as
primary storage. It is partitioned into kernel, dtb, and rootfs partitions.
Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Co
CM-T43 has an on-board EEPROM on i2c bus 0. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland <mark.rutl
On SBC-T43 the mmc1 interface is connected to an SD-Card slot.
Add the necessary muxing and configuration to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring &l
SB-SOM baseboard comes with an on-board EEPROM. On SBC-T43 this EEPROM
resides on the i2c1 bus. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring &l
AM437x has an internal touchscreen controller. Add support for it
on cm-t43.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland <mark
One of the CompuLab cm-t43 configurations comes with on-board eMMC as
primary storage, residing on the mmc2 interface. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com&g
CM-T43 has an on-board EEPROM on i2c bus 0. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: I
AM437x has an internal touchscreen controller. Add support for it
on cm-t43.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: I
Add USB support for CompuLab sbc-t43 single board computer,
defaulting to host mode.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: I
On SBC-T43 the mmc1 interface is connected to an SD-Card slot.
Add the necessary muxing and configuration to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmit
One of the CompuLab cm-t43 configurations comes with on-board NAND flash as
primary storage. It is partitioned into kernel, dtb, and rootfs partitions.
Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Gri
Add PMIC support for CompuLab cm-t43 module. For now we keep all regulators
enabled until this could be refined with power management support.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co
Add the necessary dss configuration to drive the startek lcd on CompuLab
sbc-t43 single board computer.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@co
CM-T43 comes with 2 ethernet ports connected to the cpsw subsystem, which
has 2 modes of operation: switch mode and dual emac mode.
Add the relevant muxing and set it up to work in dual emac mode by
default.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindg
atomide.com>
Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
Nikita Kiryanov (14):
ARM: am437x: cm-t43: dts: add basic support for sbc-t43
ARM: am437x: cm-t43: dts: add support for module eeprom
ARM: am437x: cm-t43: dts: add PMIC support.
ARM: am437x: cm-t43: dts: add spi-flash s
CM-T43 has an on-board 2MB SPI-flash which stores U-Boot and the U-Boot
environment. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh.
One of the CompuLab cm-t43 configurations comes with on-board eMMC as
primary storage, residing on the mmc2 interface. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co
.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
---
.../devicetree/bindings/arm/omap/omap.
SB-SOM baseboard comes with an on-board EEPROM. On SBC-T43 this EEPROM
resides on the i2c1 bus. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmit
SB-SOM comes with a PCA9555 GPIO extender. On SBC-T43 this resides on the
i2c1 bus. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh.
-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
---
.../devicetree/bindings/arm/compulab-boards.txt
34 matches
Mail list logo