Op 11 sep 2008, om 05:20 heeft Steve Sakoman het volgende geschreven:
On Wed, Sep 10, 2008 at 5:08 PM, Tony Lindgren [EMAIL PROTECTED]
wrote:
* Kalle Jokiniemi [EMAIL PROTECTED] [080825 03:28]:
From: ext Peter 'p2' De Schrijver [EMAIL PROTECTED]
This patch loads the triton2 (twl4030) with
* Kalle Jokiniemi [EMAIL PROTECTED] [080825 03:28]:
From: ext Peter 'p2' De Schrijver [EMAIL PROTECTED]
This patch loads the triton2 (twl4030) with scripts that will cut off VDD1
and VDD2 voltages when SYS_OFF_MODE signal is set.
Pushing today. I guess we should remove the
From: ext Peter 'p2' De Schrijver [EMAIL PROTECTED]
This patch loads the triton2 (twl4030) with scripts that will cut off VDD1
and VDD2 voltages when SYS_OFF_MODE signal is set.
Signed-off-by: Peter 'p2' De Schrijver [EMAIL PROTECTED]
Signed-off-by: Kalle Jokiniemi [EMAIL PROTECTED]
---
On ma, 2008-08-18 at 16:31 +0300, ext Tony Lindgren wrote:
* Kalle Jokiniemi [EMAIL PROTECTED] [080807 13:10]:
Hi Tony,
This patch should be safe to apply now as the sys off mode pin polarity
was fixed in the patch Add early init for voltage controller
configuration and off mode
* Kalle Jokiniemi [EMAIL PROTECTED] [080807 13:10]:
Hi Tony,
This patch should be safe to apply now as the sys off mode pin polarity
was fixed in the patch Add early init for voltage controller
configuration and off mode polarity (index a6cfc46..fc72c11 100644).
I compile boot tested it
Hi Tony,
This patch should be safe to apply now as the sys off mode pin polarity
was fixed in the patch Add early init for voltage controller
configuration and off mode polarity (index a6cfc46..fc72c11 100644).
I compile boot tested it on SDP board, on both plain master branch and
with Jouni's
Signed-off-by: Peter 'p2' De Schrijver [EMAIL PROTECTED]
---
drivers/i2c/chips/Makefile|2 +-
drivers/i2c/chips/twl4030-power.c | 337 +
2 files changed, 338 insertions(+), 1 deletions(-)
create mode 100644 drivers/i2c/chips/twl4030-power.c
diff
On Mon, Jul 21, 2008 at 07:02:05PM +0300, Peter 'p2' De Schrijver wrote:
+/*
+*Power Bus Message Format
+*
+*Broadcast Message (16 Bits)
+*DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
+*RES_STATE[3:0]
+*
+*Singular Message (16 Bits)
+*