In preparation to UART runtime conversion remove uart specific calls
from pm24xx/34xx files and their definition from serial.c
These func calls will no more be used with upcoming uart runtime design.
1.) omap_uart_can_sleep :- currently used to set uart->can_sleep flag based
on which uart clocks can be gated, not needed further as driver can
autosuspend based on usage_count and autosuspend delay with runtime API's.
2.) omap_uart_prepare_suspend :- can be taken care with driver suspend hooks.
3.) omap_uart_enable_irqs :- Used to enable/disable uart irq's in suspend
path from PM code, this is removed as same is handled by
uart_suspend_port/uart_resume_port in omap-serial driver which will
do an port_shutdown on suspend freeing irq and port_startup on resume
enabling back irq.
4.) Remove prepare_idle/resume_idle calls used to gate uart clocks.
UART clocks can be gated within driver using runtime funcs
and be woken up using irq_chaining from omap_prm driver.
5.) Remove console_locking from idle path as clock gating is done withing
driver itself with runtime API.
Signed-off-by: Govindraj.R <govindraj.r...@ti.com>
---
arch/arm/mach-omap2/pm24xx.c | 19 -------
arch/arm/mach-omap2/pm34xx.c | 24 --------
arch/arm/mach-omap2/serial.c | 87 ------------------------------
arch/arm/plat-omap/include/plat/serial.h | 5 --
4 files changed, 0 insertions(+), 135 deletions(-)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..83a8b96 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -133,27 +133,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
- /* Block console output in case it is on one of the OMAP UARTs */
- if (!is_suspending())
- if (!console_trylock())
- goto no_sleep;
-
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
- omap_uart_prepare_idle(2);
-
/* Jump to SRAM suspend code */
omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_POWER));
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(1);
- omap_uart_resume_idle(0);
-
- if (!is_suspending())
- console_unlock();
-
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;
@@ -265,8 +249,6 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
- if (!omap_uart_can_sleep())
- return 0;
if (osc_ck->usecount > 1)
return 0;
if (omap_dma_running())
@@ -317,7 +299,6 @@ static int omap2_pm_suspend(void)
mir1 = omap_readl(0x480fe0a4);
omap_writel(1 << 5, 0x480fe0ac);
- omap_uart_prepare_suspend();
omap2_enter_full_retention();
omap_writel(mir1, 0x480fe0a4);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..4ea6aa7 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -379,18 +379,9 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
- /* Block console output in case it is on one of the OMAP UARTs */
- if (!is_suspending())
- if (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)
- if (!console_trylock())
- goto console_still_active;
-
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
- omap_uart_prepare_idle(2);
- omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
@@ -398,8 +389,6 @@ void omap_sram_idle(void)
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@@ -446,8 +435,6 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
- omap_uart_resume_idle(0);
- omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
@@ -461,14 +448,8 @@ void omap_sram_idle(void)
omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(3);
}
- if (!is_suspending())
- console_unlock();
-
-console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
@@ -485,8 +466,6 @@ console_still_active:
int omap3_can_sleep(void)
{
- if (!omap_uart_can_sleep())
- return 0;
return 1;
}
@@ -531,7 +510,6 @@ static int omap3_pm_suspend(void)
goto restore;
}
- omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
@@ -578,14 +556,12 @@ static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
- omap_uart_enable_irqs(0);
return 0;
}
static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
- omap_uart_enable_irqs(1);
enable_hlt();
return;
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3d1c1d3..60108fd 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -26,7 +26,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/serial_8250.h>
-#include <linux/pm_runtime.h>
#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
@@ -389,72 +388,6 @@ static void omap_uart_idle_timer(unsigned long data)
omap_uart_allow_sleep(uart);
}
-void omap_uart_prepare_idle(int num)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num && uart->can_sleep) {
- omap_uart_disable_clocks(uart);
- return;
- }
- }
-}
-
-void omap_uart_resume_idle(int num)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num && uart->can_sleep) {
- omap_uart_enable_clocks(uart);
-
- /* Check for IO pad wakeup */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 p = omap_ctrl_readw(uart->padconf);
-
- if (p & OMAP3_PADCONF_WAKEUPEVENT0)
- omap_uart_block_sleep(uart);
- }
-
- /* Check for normal UART wakeup */
- if (__raw_readl(uart->wk_st) & uart->wk_mask)
- omap_uart_block_sleep(uart);
- return;
- }
- }
-}
-
-void omap_uart_prepare_suspend(void)
-{
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- omap_uart_allow_sleep(uart);
- }
-}
-
-int omap_uart_can_sleep(void)
-{
- struct omap_uart_state *uart;
- int can_sleep = 1;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (!uart->clocked)
- continue;
-
- if (!uart->can_sleep) {
- can_sleep = 0;
- continue;
- }
-
- /* This UART can now safely sleep. */
- omap_uart_allow_sleep(uart);
- }
-
- return can_sleep;
-}
-
/**
* omap_uart_interrupt()
*
@@ -552,26 +485,6 @@ static void omap_uart_idle_init(struct omap_uart_state
*uart)
WARN_ON(ret);
}
-void omap_uart_enable_irqs(int enable)
-{
- int ret;
- struct omap_uart_state *uart;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (enable) {
- pm_runtime_put_sync(&uart->pdev->dev);
- ret = request_threaded_irq(uart->irq, NULL,
- omap_uart_interrupt,
- IRQF_SHARED,
- "serial idle",
- (void *)uart);
- } else {
- pm_runtime_get_noresume(&uart->pdev->dev);
- free_irq(uart->irq, (void *)uart);
- }
- }
-}
-
static ssize_t sleep_timeout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
diff --git a/arch/arm/plat-omap/include/plat/serial.h
b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..b8d9303 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -109,12 +109,7 @@ struct omap_board_data;
extern void omap_serial_init(void);
extern void omap_serial_init_port(struct omap_board_data *bdata);
-extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
-extern void omap_uart_prepare_suspend(void);
-extern void omap_uart_prepare_idle(int num);
-extern void omap_uart_resume_idle(int num);
-extern void omap_uart_enable_irqs(int enable);
#endif
#endif
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
