On ma, 2008-07-21 at 19:17 +0300, ext Peter 'p2' De Schrijver wrote:
The following patch set introduces support for the OMAP3 SYS_OFF_MODE
signal. This will cause a properly programmed triton2 to shutdown the
VDD1 and VDD2 regulators when both core and MPU powerdomain are in off
state. The
On Tue, Jul 22, 2008 at 07:56:10PM +0530, ext Rangasamy, Devaraj wrote:
Currently sr_configure_vc() is the only dedicated API to configure Voltage
controller parameter. But still SYSOFF specific configuration shall be moved
to prcm init.
Do you suggest to move all the voltage control
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter 'p2' De
Schrijver
Sent: Monday, July 21, 2008 9:47 PM
To: linux-omap@vger.kernel.org
Subject: RFC: OMAP3 SYS_OFF_MODE support
The following patch set introduces support for the OMAP3 SYS_OFF_MODE
signal. This will cause a properly
Gangadhar
Sent: Tuesday, July 22, 2008 5:36 PM
To: Peter 'p2' De Schrijver; linux-omap@vger.kernel.org
Subject: RE: OMAP3 SYS_OFF_MODE support
I am just wondering why these changes are present in smartreflex.c. These
should be initialized during prcm init or PMIC init (if there are parameters
dependent
The following patch set introduces support for the OMAP3 SYS_OFF_MODE
signal. This will cause a properly programmed triton2 to shutdown the
VDD1 and VDD2 regulators when both core and MPU powerdomain are in off
state. The patches includes programming triton2 with the appropriate
scripts for the