Hi Nishanth,
Thanks for reviewing this patch.
On Mon, Apr 15, 2013 at 7:40 PM, Nishanth Menon n...@ti.com wrote:
Daniel,
On Mon, Apr 15, 2013 at 1:24 AM, Amit Daniel Kachhap
amit.dan...@samsung.com wrote:
As per the OPP library documentation(Documentation/power/opp.txt) all
opp find/get
On Mon, 2013-04-15 at 20:29 +0200, Linus Walleij wrote:
As agreed with Rob Herring, series applied to mvebu/drivers to
support
mvebu pcie driver.
Will this hit ARM SoC soon-ish so I can base a pull request for the
Integrator on this stuff as well?
Do not send this series upstream (or
This patch enables the SPI in EXYNOS5440 SoC. The NOR
Flash can be accessed by enabling the spi interface
Signed-off-by: Girish K S ks.g...@samsung.com
---
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 39 +++-
arch/arm/boot/dts/exynos5440.dtsi | 16 +++
This patch adds dts support for the sata controller
Signed-off-by: Girish K S ks.g...@samsung.com
---
arch/arm/boot/dts/exynos5440.dtsi |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi
b/arch/arm/boot/dts/exynos5440.dtsi
index
This patch adds dts support for the sata controller
Signed-off-by: Girish K S ks.g...@samsung.com
---
arch/arm/boot/dts/exynos5440.dtsi |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi
b/arch/arm/boot/dts/exynos5440.dtsi
index
These symbols are used only in this file and hence should
be static.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
drivers/clk/samsung/clk-exynos5250.c | 17 ++---
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c
These symbols are used only in this file and hence should be
static.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
drivers/clk/samsung/clk-exynos4.c | 26 ++
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c
These symbols are used only in this file and hence should be
static.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
drivers/clk/samsung/clk-exynos5440.c | 17 ++---
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5440.c
This patchset factors out duplicated code associated with parsing PCI
DT ranges properties across the architectures and introduces a
ranges parser. This parser of_pci_range_parser can be used directly
by ARM host bridge drivers enabling them to obtain ranges from device
trees.
I've included the
This patch converts the pci_load_of_ranges function to use the new common
of_pci_range_parser.
Signed-off-by: Andrew Murray andrew.mur...@arm.com
Signed-off-by: Liviu Dudau liviu.du...@arm.com
Reviewed-by: Rob Herring rob.herr...@calxeda.com
---
arch/mips/pci/pci.c | 50
This patch factors out common implementation patterns to reduce overall kernel
code and provide a means for host bridge drivers to directly obtain struct
resources from the DT's ranges property without relying on architecture specific
DT handling. This will make it easier to write archiecture
The pci_process_bridge_OF_ranges function, used to parse the ranges
property of a PCI host device, is found in both Microblaze and PowerPC
architectures. These implementations are nearly identical. This patch
moves this common code to a common place.
Signed-off-by: Andrew Murray
On Mon, 15 Apr 2013 20:42:57 -0700, Doug Anderson diand...@chromium.org wrote:
From: Thomas Abraham thomas.abra...@linaro.org
With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Hi,
thanks for the submission.
On Thu, Apr 04, 2013 at 09:52:01PM -0700, Naveen Krishna Chatradhi wrote:
From: Naveen Krishna Chatradhi ch.nav...@samsung.com
Adds support for High Speed I2C driver found in Exynos5 and
later SoCs from Samsung.
This driver currently supports Auto mode.
On Tue, Apr 16, 2013 at 01:31:40PM +0200, Thomas Petazzoni wrote:
Dear Jason Cooper,
On Tue, 16 Apr 2013 07:29:51 -0400, Jason Cooper wrote:
Do not send this series upstream (or even in -next) until it has been at
least build-tested and acked by the affected architectures. AFAIK it
On 04/15/2013 04:14 PM, Tomasz Figa wrote:
This patch adds basic device tree definitions for Samsung S3C64xx SoCs.
Since all the SoCs in the series are very similar, the files are created
hierarchically - one file for the whole series and then separate files
for particular SoCs including the
On Tuesday 16 of April 2013 08:09:10 Rob Herring wrote:
On 04/15/2013 04:14 PM, Tomasz Figa wrote:
This patch adds basic device tree definitions for Samsung S3C64xx SoCs.
Since all the SoCs in the series are very similar, the files are created
hierarchically - one file for the whole
On Fri, Apr 12, 2013 at 09:17:16PM +0200, Tomasz Figa wrote:
This series is an attempt to make the samsung-time clocksource driver ready
for multiplatform kernels. It moves the driver to drivers/clocksource, cleans
it up from uses of static platform-specific definitions, simplifies timer
On Mon, Apr 15, 2013 at 11:14:39PM +0200, Tomasz Figa wrote:
+ * This gpio driver includes support for device tree support and there
+ * are platforms using it. In order to maintain compatibility with those
+ * platforms, and to allow non-dt Exynos4210 platforms to use this
+
On Mon, Apr 15, 2013 at 11:14:40PM +0200, Tomasz Figa wrote:
{ .compatible = samsung,exynos4x12-pinctrl, },
{ .compatible = samsung,exynos5250-pinctrl, },
{ .compatible = samsung,exynos5440-pinctrl, },
+ { },
Strictly speaking this is a
Hi Inki,
This small patch series adds device tree support for the DRM FIMC driver.
The binding documentation can be found in -next at Documentation/devicetree/
bindings/media/samsung-fimc.txt.
It will make the driver dependent on OF. This patch series is needed in
3.10 to ensure simultaneous
There is no need for explicit calls of devm_kfree(), as
the allocated memory will be freed during driver's detach.
Remove the redundant devm_kfree() calls from probe() and
remove() callbacks.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park
The clocks handling is refactored and a mux clock handling is
added to account for changes in the clocks driver. After switching
to the common clock framework the sclk_fimc clock is now split
into two clocks: a gate and a mux clock. In order to retain the
exisiting functionality two additional
This patch adds OF initialization support for the FIMC driver.
The binding documentation can be found at Documentation/devicetree/
bindings/media/samsung-fimc.txt.
The syscon regmap interface is used to serialize access to the
shared CAMBLK registers from within the V4L2 FIMC-IS and the DRM
FIMC
On 04/12/2013 09:17 PM, Tomasz Figa wrote:
This series is an attempt to make the samsung-time clocksource driver ready
for multiplatform kernels. It moves the driver to drivers/clocksource, cleans
it up from uses of static platform-specific definitions, simplifies timer
interrupt handling and
Commit de88cbb7 moved definitions of chained_irq_enter and
chained_irq_exit to a generic header, which must be now included instead
of the legacy arch-specific one.
This patch fixes build error caused by including the legacy header
leading to undefined chained_irq_enter and chained_irq_exit
Commit f67faf487 added driver data for Exynos5250, which is available
only if CONFIG_PINCTRL_EXYNOS is enabled. However probably due to merge
error, the reference to this driver data structure was located outside
of relevant ifdef and compiled unconditionally, leading to link error
with
Commit f67faf487 added driver data for Exynos5250, which is available
only if CONFIG_PINCTRL_EXYNOS is enabled. However probably due to merge
error, the reference to this driver data structure was located outside
of relevant ifdef and compiled unconditionally, leading to link error
with
On Tuesday 16 of April 2013 17:26:43 Mark Brown wrote:
On Mon, Apr 15, 2013 at 11:14:39PM +0200, Tomasz Figa wrote:
+ * This gpio driver includes support for device tree support and
there
+ * are platforms using it. In order to maintain compatibility with
those + * platforms, and
On Tuesday 16 of April 2013 17:27:50 Mark Brown wrote:
On Mon, Apr 15, 2013 at 11:14:40PM +0200, Tomasz Figa wrote:
{ .compatible = samsung,exynos4x12-pinctrl, },
{ .compatible = samsung,exynos5250-pinctrl, },
{ .compatible = samsung,exynos5440-pinctrl,
Hi Sylwester,
On 16 April 2013 23:01, Sylwester Nawrocki s.nawro...@samsung.com wrote:
@@ -1835,16 +1859,19 @@ static int fimc_probe(struct platform_device *pdev)
ret = exynos_drm_ippdrv_register(ippdrv);
if (ret 0) {
dev_err(dev, failed to register drm fimc
31 matches
Mail list logo