to implant
your own kernel into system.
A hard work : one error or forgotten step : your system starts no longer :-((
The easier way : I intend to mail my tips to redhat-center
but I can't find an suitable mail-address.
Any helpful hints out there ?
--
mfg ACCOM / Hajo C Jeske
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix-Administrator,
Daten-Rettung und Komplett-Einrichtung/Upgrade von Linux-Systemen mit Service und
Wartung
- bundesweit - und schnell durch Partner-Netz -
---
This sf.net email is sponsored
fixed and optimized kernels for my system
and they will not run with other hardware [ I guess ].
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix-Administrator,
Daten-Rettung und Komplett-Einrichtung/Upgrade von Linux-Systemen mit Service und
Wartung
.
I do run own kernels since 1999 and I never had a problem.
I'm using good drives like Quantum or IBM.
You need a dev-station and kernel sources,
knowledge about configure a kernel and
you must know how to install an own kernel.
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix
driver but wasnt too sucessful.
Does anyone know what I am missing?
Did you try
'Probe all SCSI-devices for LUNs'
Sometimes that helps!
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix-Administrator,
Daten-Rettung und Komplett-Einrichtung/Upgrade von Linux-Systemen mit Service
may mount
/bin/mount -t vfat /dev/sdany1 /mnt/my-card
successfully.
Any help much appreciated.
I hope that helps
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix-Administrator,
Daten-Rettung und Komplett-Einrichtung/Upgrade von Linux-Systemen mit Service und
Wartung
, less English and some C
but that ... ?
and what is your USB-problem ?
;-)
--
mfg Hajo C Jeske
UNIX-Software-Entwickler, Unix-Administrator,
Daten-Rettung und Komplett-Einrichtung/Upgrade von Linux-Systemen mit Service und
Wartung
my Linux-page: www.jeske.org (in german and must be updated
) camera with gphoto2.
Hello
besides all given information - one and the most important is missing :
do a 'tail -f /var/log/messages'
just before plugging
and it will tell you, what the problem is, I guess.
hope that helps ...
--
mfg Hajo C Jeske, UNIX-Software-Entwickler, Unix
=0x805d194,
device='/dev/sg0'
[microtek2] scsi_inquiry: 'Error during device I/O'
[microtek2] attach: 'Error during device I/O'
[microtek2] sane_get_devices: attach status 'Error
during device I/O'
module sg.o loaded?
lsmod
insmod sg
or
modprobe sg
--
mfg Hajo C Jeske, UNIX
reader with compact-flash-SLOT as first
or a
Multi-card-reader with compact-flash-SLOT NOT as the first slot ?
If the last is your's, you are able to halp me!
All the best for your prob ;-)
--
mfg Hajo C Jeske, UNIX-Software-Entwickler, Unix-Administrator
On Mon, 11 Aug 2003 11:24:31 +0100 (BST)
Ged Haywood [EMAIL PROTECTED] wrote:
Hello there,
On Mon, 11 Aug 2003, Hajo C Jeske wrote:
trying to run an USB-mouse and a multi-card-reader
under 2.4.21 - both failed
-
under 2.4.20 all work fine!
equal mod-load under both
ncr53c8xx sd_mod]
Compactflash-card (both sde1) NOT mountable under 2.4.21
but recognized.
Under 2.4.20 it works fine!
Anybody any hint for this problem?
thanks for all help ...
--
mfg Hajo C Jeske, UNIX-Software-Entwickler, Unix-Administrator
point is under 2.4.21
after an umount and a remount it keeps sde1
while it increased under 2.4.20 (and earlier) to sdf1,sdg1, ...
but till 2.4.20 I had sudden access.
After some reboots and tests I will come back.
Thanks till here.
--
mfg Hajo C Jeske, UNIX-Software-Entwickler, Unix
On Tue, 12 Aug 2003 11:57:06 +0200
Hajo C Jeske [EMAIL PROTECTED] wrote:
Hello again,
I can try what I want - the problem continues.
even pre-loading of necessary modules (fat,vfat,nls_cp437)
nothing helps.
( sda - sdc my SCSI-system-HDs )
( sdd - empty slot of reader )
( sde
On Fri, 15 Aug 2003 11:30:56 +0200
Hajo C Jeske [EMAIL PROTECTED] wrote:
Hello again,
the problem seems to be fixed under 2.4.22
who ever it did - thank you! :-)
I can try what I want - the problem continues.
even pre-loading of necessary modules (fat,vfat,nls_cp437)
nothing
15 matches
Mail list logo
