Hi Ricardo:
For PPCBoot, I made MII serial interface routines for the EST
(WindRiver) SBC8260 board. This was a general purpose implementation,
customizable for different hardware by changing the #defines that
toggled the I/O port pins. I also added a mii command that allows
you to read and
In message 4.3.2.20011008074637.00c64340 at falcon.si.com you wrote:
For PPCBoot, I made MII serial interface routines for the EST
(WindRiver) SBC8260 board. This was a general purpose implementation,
customizable for different hardware by changing the #defines that
toggled the I/O port
Hi, Dan
I can assure you that I intend to follow strictly your orders :^) when
submitting a patch to the linuxppc development tree.
However, I didn't tell the whole truth. Actually, I'm currently not using BK,
but instead rsyncing from the source.mvista.com mirror. Is that all right for
Ricardo Scop wrote:
I can assure you that I intend to follow strictly your orders :^)
Yeah, orders..There are (too many :-) other cooks if you would
rather send your recipe to them :-).
.. Is that all right for
obtaining the current sources?
Sure.
BTW, I'm staring right now at
Tom,
Saturday, October 06, 2001, 12:34:19 AM, you wrote:
TR If you turn on CONFIG_USE_MDIO, it _may_ work. You might have to add in
TR support for the LTX960A tho (only 970 and 971 are explicitly supported).
Oh, I made two typos in a row! Actually, we are using the LXT970A chip,
which is an
