Hi,
I want to port the Monta Vista Linux Kernel on our
customspecific board. I want to use the EST Debugger
from Windriver, but there are some problems with using
the MMU, specially while debugging the startup code.
I read the Mailing list and found tips in loading a
compressed linux zimage with
In message 3A06703F.6D5DBB23 at dspace.de you wrote:
I want to port the Monta Vista Linux Kernel on our
customspecific board. I want to use the EST Debugger
Which firmware are you running on your board? Do you know about the
PPCBoot project (http://ppcboot.sourceforge.net)?
from
In message 3A069BD6.9F63FF6C at dspace.de Andreas Schreckenberg wrote:
Our board contains a MPC750-466 MHz CPU, it's no embedded system in the
Why not? You can build an Embedded System around any CPU :-)
There is no firmware. The board has flash memory and jumps directly to
ram after reset.
At 12:53 PM 11/6/00 +0100, Andreas Schreckenberg wrote:
Wolfgang Denk wrote:
In message 3A06703F.6D5DBB23 at dspace.de you wrote:
Which firmware are you running on your board? Do you know about the
PPCBoot project (http://ppcboot.sourceforge.net)?
Our board contains a MPC750-466 MHz