Am Mittwoch, den 06.08.2008, 16:45 +0300 schrieb
[EMAIL PROTECTED]:
But when I try to start dhcp3-server, it says:
[EMAIL PROTECTED]:~# /etc/init.d/dhcp3-server restart
dhcpd self-test failed. Please fix the config file.
The error was:
/etc/ltsp/dhcpd.conf line 7: subnet 172.23.24.21
Am Mittwoch, den 06.08.2008, 21:00 +0300 schrieb
[EMAIL PROTECTED]:
Dear Asmo,
subnet 172.23.24.0 netmask 255.255.255.0
and see if that helps.
Here is one for you, Anselm - taken with Eee here at Kokkola.
http://www.arkki.info/howto/Wiki/FreeAsSpeech.jpg
That obviously asks for a
Am Freitag, den 16.11.2007, 14:46 +0100 schrieb Tomasz Lewicki:
Sebastien Koechlin napisał(a):
You probably did not understand how a X-Terminal is working. Nothing
is run by the user on the terminal, all programs are running on the
server, so all requests are from the server IP and not
Am Montag, den 12.11.2007, 21:20 +0100 schrieb
[EMAIL PROTECTED]:
Hello,
Any suggestion about booting a LTSP client using the hard drive and the
partition in which XP is installed?
I tried putting an etherboot .com file in C: and modifying boot.ini adding
the
line
Am Freitag, den 02.11.2007, 07:41 -0700 schrieb Mel Wade:
Interesting concept. The trick would be to tie the session to the specific
IP address.
And here the problem begins. If you want an application to use a
specific IP on outgoing packets, usually that app should use the
bind() call on the
Am Montag, den 29.10.2007, 13:22 -0500 schrieb Scott Balneaves:
On Mon, Oct 29, 2007 at 10:11:31AM -0700, Mel Wade wrote:
In LTSP, each client is seen by my content
filter and firewall as all coming from the same address - the LAN address of
the LTSP server. Rules and authentication all
Am Freitag, den 05.10.2007, 14:33 +0100 schrieb Alistair Crust:
Hi,
I've been puzzling over the problem of load balancing for some time and
I've come up with an idea.
Our current setup here is that we have 1 nis/nfs server for
authentication and sharing of /home, and we have 3 ltsp
Am Donnerstag, den 30.08.2007, 15:02 +0200 schrieb Poul Møller:
I'm upgrading (rather re-installing) LTSP 4.2 on a fresh Fedora 7
server, but I'm having a very annoying TFTP Timeout problem on all my
clients (Both PXE and Etherboot clients)
My setup is quite standard:
eth0 (192.168.1.x)
Am Dienstag, den 21.08.2007, 10:48 -0400 schrieb Rob Owens:
I'm currently running LTSP 4.2, but would like to test version 5.0. Is
there a convenient way to do this with both servers on the same network?
My current setup is Xubuntu 6.10 running LTSP 4.2, with Debian Etch
handling DHCP
Am Montag, den 13.08.2007, 08:52 +0800 schrieb [EMAIL PROTECTED]:
On Monday 13 August 2007 03:05, [EMAIL PROTECTED]
wrote:
I am a big fan of SSH PKI. If a login manager could be made to require
and id_dsa key, would that make the session more secure?
The point of a trusted system is
Am Montag, den 30.07.2007, 10:02 -0600 schrieb Roy Souther:
Francis, your post got me thinking.
I am a big fan of SSH PKI. If a login manager could be made to require
and id_dsa key, would that make the session more secure?
The point of a trusted system is that it can be verified to be
Am Montag, den 07.05.2007, 12:54 +0200 schrieb Rolf-Werner Eilert:
I would need it to be running on the two screens at the same time, i. e.
switching from server1 to server2 by just invoking Ctrl-Alt-F1 or F2.
I'm sitting in my office here, and I need the old server constantly and
can
Am Montag, den 19.02.2007, 12:51 +0100 schrieb bushtor:
Hi,
What I see as a possible solution to all this is a bulletproof dual boot
solution for the notebooks: Before they are allowed to connect to the
school network for the first time, each student would need to run an
installer which
Am Montag, den 19.02.2007, 12:46 +0100 schrieb Gudmund Areskoug:
One thing I believe needs to be emphasized on the plus side, is that
while sticking with the easiness of dealing with familiar fat Windows
boxes *seems* cheaper, it is IMNSHO just a case of self-deception, since
the real cost is
Am Dienstag, den 23.01.2007, 09:47 +0900 schrieb Tomoki Taniguchi:
I need to start testing diskless TC terminals to use with a LTSP server.
What diskless thinclient terminals do people on this list recommend.
The only ones that i know about so far is HP(compaq) and WYSE thin clients.
WYSE will
Am Mittwoch, den 10.01.2007, 09:50 +0900 schrieb [EMAIL PROTECTED]:
On Wednesday 10 January 2007 01:34, [EMAIL PROTECTED]
wrote:
PXE wireless boot is realistically not going to happen!
James
PS
I hate general unqualified statements, so
Before the wireless card can PXE boot the host
Am Samstag, den 21.10.2006, 15:56 +0300 schrieb H. Sami Sozuer:
Hi,
I realize this is a strange question, but is it possible
to install ltsp on a windows2003+cygwin system and
have the terminals boot properly?
I need the clients to be running linux locally, but they'll
be connecting to a
Am Montag, den 16.10.2006, 16:41 -0700 schrieb Casey Mynott:
Hey All,
Okay, I did a search that didn't come up with much. I have a colored imac
and when I hold down the N key to boot from the K12LTSP server it skips
past it and starts booting the hard drive. Their is no firmware lock so I
Moin Rolf,
Am Freitag, den 08.09.2006, 10:02 +0200 schrieb Eilert:
When I start ltspswapd manually it runs perfectly. After some searching
around the directories I found this:
ltspswapd is started as 3rd process in init level 5. Maybe that's too
early? In /var/log/boot.msg there is an entry
Am Dienstag, den 05.09.2006, 18:02 + schrieb Noman yousuf:
anselm
thanks for yr email . i have all ldap users u can do a favour to give me
that script
I do not have access to it. And sorry, I am just preparing to move half
my household _and_ have a dozen customers nagging for an
Am Dienstag, den 05.09.2006, 04:54 + schrieb Noman yousuf:
hai i also want to do this
i have 50 users and 5 depts . i want that every dept user can only print
from its dept printer not from other depts printer . no need to hide
printers i just named them as dept name any idea waht i do
Am Montag, den 04.09.2006, 23:49 +0200 schrieb Miroslav Mareš:
Hi,
use any one client from Siemens - Scenic PRO C6 300?? I have a problem
with correct settings for graphic and sound... I know that that graphic
card is Matrox MGA G100 with 2 MB and I set this in lts.conf:
XSERVER
Am Freitag, den 01.09.2006, 15:15 -0600 schrieb Dormition Skete:
I'm trying to set LTSP up on this fancy new server we got, and I'm a bit
confused about something.
This thing has two on-board gigabit network ports. Obviously, I have to
assign a separate IP Address for each one (or use
Am Donnerstag, den 31.08.2006, 12:09 +0200 schrieb Alexis:
hi,
i've just download and install the ltsp 4
i'm just falling in the same problem
i get .(pxe)...
.
and this verry nice message
Am Dienstag, den 15.08.2006, 16:22 +0200 schrieb Richard Bos:
This piece of magic looks very interesting as it may prevent a lot of system
administration work:
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.199;
if substring (option
Am Sonntag, den 13.08.2006, 17:29 +0530 schrieb Ashish Nabira:
I don't think it's possible for the purpose you are looking for. You
have to use Windows Terminal services for making windows apps available.
THIS IS SO WRONG.
Just to put an immidiate opposite experience: We have been running
Am Donnerstag, den 10.08.2006, 05:33 -0700 schrieb sandin:
Hey,
I hope nobody vomits when they see this, but I *have* to ask...
Is there any way to pass the option root-path parameter using
Microsoft DHCP server?
Does this parameter have an option number?
Thank you!
I put this
Am Montag, den 07.08.2006, 06:20 +0700 schrieb jimmy kosasih:
hi,
what happen if ltsp + ubuntu 6.06 + vmware + w2kserver (all in one) in
1 pc?
tq
I'd guess it just works...
You will have to setup bridged networking to keep it simple, but then,
there is no reason why it should *not* work.
Am Mittwoch, den 02.08.2006, 11:45 +0800 schrieb Joey S. Eisma:
hello!
on ubuntu, how do you change dhcp server listening port and the
clients's dhcp (doing etherboot) connection port?
Hi Joey,
for the Etherboot part, it's a rom-o-matic option (ALTERNATE PORTS).
For LTSP, you will need
Am Montag, den 31.07.2006, 13:51 -0400 schrieb Joe Auerbach:
Note to self and others: the other port seems to be in the same place as
the wall connection, which leads me to believe that it's a computer port
or some other interface, which could be helpful.
Joe Auerbach wrote:
Here's a
Am Donnerstag, den 27.07.2006, 19:14 +0200 schrieb Richard Bos:
Op donderdag 27 juli 2006 17:07, schreef u:
cannot recommend you any subnet-subnet router with a nice
webinterface,
Weird isn't it?
The need seems to be there only for enterprises, and then, they can
order a Cisco device,
Am Mittwoch, den 26.07.2006, 19:28 +0200 schrieb Richard Bos:
Can anyone recommend (or know) a nice router that can be configured via a
webinterface? I'm not looking for an internet/wan - switch device that are
offered anywhere. Just a real router, that can interconnect 2 (or a little
Am Freitag, den 21.07.2006, 14:25 -0400 schrieb RP:
About 5 years ago I had a small LTSP setup working and was duly
impressed. Today I have a different project with a different set of
goals, and I'm wondering if LTSP would be up to the job.
I have 12 systems, all running 1920x1080
Am Mittwoch, den 19.07.2006, 11:21 +0200 schrieb Andrea Reale:
Hi all,
For my first message on this mailing list, i will ask a question about
creating a ltsp system on ten 486s machines and a P4 1,5 Ghz as
server. I need this system for running applications such as openoffice
or firefox (it
Am Montag, den 17.07.2006, 10:54 -0400 schrieb Krishna Murphy:
Hey-
It appears that I need to have two DHCP servers running on one sub-net.
Apparently this causes a conflict with one in particular (inside a router
provided by an ISP) and the DHCP3 server under Debian that I'm using to
Am Montag, den 17.07.2006, 10:55 +0200 schrieb Lars Madsen:
I'm trying to get KDM to work on our servers, such that when users
connects to this particular server, they will get KDM as the login
manager.
It works fine if I use GDM, but for various reasons I need XDM or KDM.
When ever I
Am Freitag, den 14.07.2006, 11:57 -0700 schrieb
[EMAIL PROTECTED]:
Hello All,
I was wondering if anyone new why a mandrake 10.0 dhcp server will
boot a dell optiplex gx100, but my ubuntu dhcp3 server will not.
Using LTSP of course.
Assuming the config is the same, you probably ran into
Am Samstag, den 15.07.2006, 17:06 +0300 schrieb H. Sami Sozuer:
One problem though: We have two NICs on each node: a RTL8139 (100
Mbit) with a boot
ROM and a RTL8169 (GigE). We boot off the RTL8139 of course but when
the kernel boots,
it recognizes the RTL8169 as eth0. I want to
Am Sonntag, den 16.07.2006, 06:38 -0700 schrieb sandin:
is there any other way to tell the thin clients where to mount the
file systems that by passing it as a DHCP parameter?
also, are there other shared network resources that can be used such
as a smb share?
i am in the process of
Am Montag, den 17.07.2006, 16:15 -0400 schrieb Krishna Murphy:
Anselm-
I've had success in some (not necessarily all) situations running two DHCP
servers with one handing IPs to general-purpose PCs in one range (.99 in
the subnet 192.168.1) and the other recognizing specific MAC addresses
Am Donnerstag, den 13.07.2006, 12:37 +0500 schrieb Metal Gear:
hi all,
i am trying to boot a workstation using PXE. I am facing a strange
problem, follwoing is my dhcpd.conf
when i try to use only 'filename
Am Freitag, den 07.07.2006, 22:54 + schrieb Alberto Castillo:
Hi!
This is the first time that I write to this list!
hello everybody!
I need to know basically how I can boot a client IBM PS/ValuePoint whit
4-8Mb (486SX no math. coprocessor).
I have already 100 of this machines and here
Am Donnerstag, den 06.07.2006, 09:51 +0200 schrieb
[EMAIL PROTECTED]:
Hi,
I checked the permissions, but the RSA authentication persists to
refuse to work.
I bypassed that problem: by copying the file /etc/shadow of the LTSP
server to the thin client (/opt/ltsp/i386/etc/), I am able to
Am Freitag, den 07.07.2006, 01:26 +0200 schrieb Thibaut LE LEVIER:
Hi everybody
I try to use LTSP with an other computer.
Everything is OK for the server but then I try to boot on a Terminal,
this one cannot load the file from dhcp.
there is in my dhcp configuration file (dhcpd.conf):
Am Freitag, den 07.07.2006, 15:27 -0600 schrieb Roy Souther:
This is not an LTSP question. I don't use Fedora but I think many
people here do.
Here is the problem, Fedora is using Xorg. There are no programs in
the /usr/X11R6/bin directory. I found that I can start an X session
using
Am Dienstag, den 04.07.2006, 08:17 -0400 schrieb Rodrigo Gesswein:
Hi!
I'm running LTSP 4.2 with xdm and I have some terminals with dual-head
configuration (two monitors without xinerama).
After reading the mailing list archives and some Internet sites,
finally I could personalise the
Am Samstag, den 24.06.2006, 21:53 + schrieb Vidyaratha Kissoon:
Hi all
I am trying to use a compaq presario 9240. It is not booting from the
Universal floppy, I am getting a series of messages including
pci_init: no BIOS32 detected
The card is a 3 com card
Please advise
Thanks
Vidya
Am Montag, den 12.06.2006, 09:32 -0500 schrieb Hugo Perez Casanova:
Hi.
I've been using LTSP for quite a while. Had no problems with version
4.1, when upgrading to v4.2 in a CentOS 4.3 I can not set individual
parameters for the terminals, such as printer, mouse type, etc. Only
the global
Am Sonntag, den 11.06.2006, 09:59 +0100 schrieb Daniel Carrera:
Hello,
I want to make a boot floppy fro rom-o-matic that will boot my laptop
and make it act as a thin client. The laptop has a PCMCIA ethernet card
without any useful markings on it. How can I figure out what driver I
need
Am Freitag, den 09.06.2006, 09:49 +0100 schrieb Alistair Crust:
Hi,
I have an Edubuntu dapper box (workstation only install) that I have
installed ltsp 4.2 on. I have got our Wyse winterm's working with it
after compiling our own kernel and iniramfs (which we had to rename to
initrd for
Am Mittwoch, den 24.05.2006, 19:57 -0700 schrieb rufus laggren:
I have too many NAT conversersion happening behind the
external router; at the moment the LTSP server is
planned to live behind a NAT'g router and a NAT'g
firewall. I want to stop the firewall NAT and the LTSP
NAT and allow the
Am Sonntag, den 21.05.2006, 17:36 -0400 schrieb Leonid Dubinsky:
Anselm Martin Hoffmeister wrote:
Am Freitag, den 12.05.2006, 22:12 +0200 schrieb Pål Arne Hoff:
I'm pretty sure you won't be able to use Sunrays with LTSP. They use
proprietary technology to send video signals from
Am Freitag, den 12.05.2006, 22:12 +0200 schrieb Pål Arne Hoff:
I'm testing Sunray for work right now. Sun Norway said we could get the
SR2 in the beginning of june. The 1g isn't good enough for our use (only
support 1280x1024 resolution, and the speed of the video card is too
slow. Also
Am Mittwoch, den 10.05.2006, 07:52 +0530 schrieb Sudev Barar:
A quick question: Any one used Sun Ray thin clients on LTSP?
I did not (not yet, although trying that might be interesting).
However the Sun Server Software is available for Linux, and after a bit
of tricking and hacking, it really
Am Montag, den 08.05.2006, 17:10 -0400 schrieb John Blinka:
Hi,
I hope someone can help me debug an ltsp installation. It worked
perfectly up until a power outage that brought the server and all
the terminals down suddenly. Upon restarting, the terminals all
show something like this:
Am Montag, den 08.05.2006, 13:05 +0200 schrieb Zoilo Gomez:
Verner Kjærsgaard wrote:
- hi there,
- I've set up a number of large LTSP installations, just like the one you
describe. DO USE SCSI DISKS! That's the bottleneck. IDE will surely not be
good enough, SATA not either.
A
Am Freitag, den 31.03.2006, 04:26 + schrieb Daniel Mealha Cabrita:
So, from my experience, even if a terminal costs more than a white-box
computer (but it doesn't, because any white-box can be a terminal itself), it
actually costs much less considering the situation as a whole (the
Am Freitag, den 31.03.2006, 09:36 -0700 schrieb Roy Souther:
Has anyone written a program to cause a system to sleep/halt/reboot by
sending it a TCP or UDP command? I would like it to be along the same
lines as ether-wake, a simple C or C++ program that is small and does
not use a lot of
Am Dienstag, den 28.03.2006, 10:18 +0200 schrieb Stefan Eldeby:
Hi
When an client connects to the server the login screen does not appears.
I will only have a gray screen with cursor.
When I'm looking in the ltspcfg the xdmcp service is not installed.
I have enabled xdmcp in gdm.conf, the
Am Freitag, den 24.03.2006, 00:48 -0700 schrieb Dormition Skete:
I have a very perplexing problem with dhcp. I had to rebuild my server due
to a hard disk failure, and I decided to try SuSE 10.0 for a change. I have
installed LTSP several times on Redhat and Slackware without any
Am Dienstag, den 21.03.2006, 11:56 +0100 schrieb Eilert:
Ääähm
Lol. The german way of pronouncing well, ... - one of the few things I
remember of the 11th grade at school was my English teacher training us
to not say Ääähm but well, resulting in even more confusion while
trying to build proper
Am Sonntag, den 19.03.2006, 21:52 -0500 schrieb Claude Gélinas agr.:
I want to switch from a 100baseT to 1000baseT card on an ltsp terminal
on FC3 server.
I've purchase a dlink dge-530T PCI. install it in the slot #1 and
disable the motherboard lan in the bios but nothing work. can't boot
Am Montag, den 20.03.2006, 06:55 -0500 schrieb Susan G. Kleinmann:
I have installed ltsp-server-standalone, version 0.82debian2 on
a machine running Linux 2.6.15. I then used ltsp-build-client to build
a client system suitable for hosting thin clients. I have succeeded in
getting two thin
Am Montag, den 20.03.2006, 07:37 -0500 schrieb Susan G. Kleinmann:
On 20 March 2006 at 13:11, Anselm Martin Hoffmeister [EMAIL PROTECTED]
wrote:
Am Montag, den 20.03.2006, 06:55 -0500 schrieb Susan G. Kleinmann:
I have installed ltsp-server-standalone, version 0.82debian2 on
a machine
Am Montag, den 20.03.2006, 08:26 -0500 schrieb Claude Gélinas agr.:
Le lundi 20 mars 2006 à 10:37 +0100, Anselm Martin Hoffmeister a écrit :
Am Sonntag, den 19.03.2006, 21:52 -0500 schrieb Claude Gélinas agr.:
I want to switch from a 100baseT to 1000baseT card on an ltsp terminal
on FC3
Am Montag, den 20.03.2006, 17:07 +0200 schrieb Andy Rabagliati:
On Mon, 20 Mar 2006, R P Herrold wrote:
On Mon, 20 Mar 2006, Andy Rabagliati wrote:
I am not quite certain where the NFS server is in your setup ?
Is it a single server for the whole network ?
What was the disk
Am Montag, den 20.03.2006, 21:46 +0100 schrieb Verner Kjærsgaard:
Hi list,
- this is a quickie...
- I just can't figure out what tool to use:
The school admin at one of the installations wishes to be able to publish
messages onto the screen of one particular client - a client that is
Am Montag, den 20.03.2006, 13:51 -0700 schrieb Reed Loefgren:
I'm setting up a new ltsp server using SuSE-10.0 (have done three prior
with SuSE-9.0 and 9.2.) After checking out the lists I think I've fixed
the DNS-3.0.3 issue using 'next-server = ' in dhcpd.conf, but when I
boot I get this
Am Montag, den 20.03.2006, 22:37 +0100 schrieb Verner Kjærsgaard:
- thanks, - but doesn't the xmessage text show up on all screens of all
clients? I looked into the man page of xmessage and I can't seem to find any
destination parameter?
The display selection works - as usual in the X
Am Sonntag, den 19.03.2006, 06:27 -0500 schrieb Moez kilani:
I am still unable to get my D-Link card detected by
the ROM boot (ne2000, ISA).
Is it possible to overcome the etherboot process in
order to load the kernel to the workstation?
In particular I can use either a booting floppy or
Am Freitag, den 17.03.2006, 10:56 +0100 schrieb Eilert:
Strange things happening ;-)
A new client doesn't want to let me read my own $home anymore. But it is
possible to jump into sub-dirs and read and write from there. Changing
rights didn't help.
There are two programs I could't start
Am Montag, den 13.03.2006, 21:12 -0400 schrieb Timothy Legge:
Andrew wrote:
My gigabit subnet has finally given up. I am getting the following
message repeated all the time:
r8169: eth1: Reset RTL8169s PHY
Does anyone know what I need to do?
Try a complete power down and pull
Am Donnerstag, den 09.03.2006, 10:52 -0500 schrieb Bill Arlofski:
Configure each LTSP workstation in Big Brother for example and you will
have a nice web page showing you which machines are online and which are
currently offline with a complete history of their on-to-off and/or
off-to-on
Am Mittwoch, den 08.03.2006, 14:12 -0500 schrieb Joe Auerbach:
hmm . . . a five second test shows you to be most right. i was thinking
of internal stuff (my recent adventures in squid confused me). ping
should work fine. Though I stand by my netstat from the server and note
that you
Am Mittwoch, den 08.03.2006, 16:50 -0500 schrieb Lonnie Cumberland:
Hello All,
Is there a way to build a floppy boot disk for my clients in which I can
specify a specific DHCP server IP?
Not as such, but you might (in case you use Etherboot) try the option
REQUIRE_VCI_ETHERBOOT to make
Am Sonntag, den 05.03.2006, 22:41 +0100 schrieb Richard Bos:
Just wondering whether something like wireless pxe exists? I know that
something like a Wireless Access Point + Ethernet Adapter exists:
http://www.asus.com/products.aspx?l1=12l2=41l3=0model=59modelmenu=1
But this is not the same
Am Montag, den 06.03.2006, 15:40 +0100 schrieb Pierre Yann Baco:
Anselm Martin Hoffmeister a écrit :
Am Sonntag, den 05.03.2006, 22:41 +0100 schrieb Richard Bos:
Just wondering whether something like wireless pxe exists? I know that
something like a Wireless Access Point + Ethernet
Am Samstag, den 04.03.2006, 12:46 -0800 schrieb Joseph Toman:
Does anyone know a way to remotely login or logout a kiosk machine with
GDM? It would be great if the librarians
could just start a session on one of the kiosk machines without having
to hand out passwords or walk over to the
Am Freitag, den 03.03.2006, 14:59 -0700 schrieb Roy Souther:
For a log time now I have been wanting any way to log out the desktop
session if the user is not active at the desktop. After asking on this
list and looking around on Google for a very long time I decided to
write my own.
[...]
Am Donnerstag, den 02.03.2006, 13:29 -0800 schrieb Lonnie Cumberland:
Greetings All,
Hi Lonnie,
One of the systems will allow users to connect with their existing
connections via a VNC or NX Client which should not be a problem as
this seems to be the standard X-Server system in which
Am Sonntag, den 05.02.2006, 22:54 +0100 schrieb Poul Moller:
Hi,
I'm having several Win2000 PC's (NTFS) that boots OK using Etherboot
floppies (*.zdsk). However downloading the corresponding DOS version
(say RTL8139.COM) and adding this to Windows c:\boot.ini
c:\rtl8139.com=LTSP
I
Am Freitag, den 13.01.2006, 16:45 + schrieb CP Hennessy:
Has anyone seen the way swsuspend works on laptops ?
Basically the laptop's memory can be written to the swap partitiion of
your PC and when you restart all of the previous programs are restarted
at exactly where they left off.
Am Donnerstag, den 05.01.2006, 21:28 + schrieb alejandro lizcano:
Hi,
I installing ltsp on mandriva 2006 and 2005, by default the system is
disabling graphic login on server, i always respond n to the answer
of disable it, but by default is disable
What lines i got to change in:
Am Donnerstag, den 22.12.2005, 12:59 +0200 schrieb Nico Oosthuizen:
I have been trying to boot from the BIOS, after I loaded
the bootrom file into the BIOS, on a few Pentium I's that I
have.
With the machines that have an AMI BIOS I have been
successfull. But on the machines with an Award
Am Dienstag, den 06.12.2005, 17:09 +0100 schrieb Marco Nätlitz:
Hi LTSP-Dsicuss,
i am using Gentoo Linux 2005.1 and wanted to get sound working on my
terminal. I wanted to use ESD as sound server.
My Terminal worked fine bevore I tried to realise that :).
You hopefully saved the config
Am Montag, den 05.12.2005, 15:57 -0700 schrieb Steve Dibb:
Anselm Martin Hoffmeister wrote:
I do not at all understand what is going on in the packet log you sent
earlier. This does not look like DHCP packets to me. Are your clients
running etherboot, or (Intel/...) PXE or some
Am Dienstag, den 29.11.2005, 14:58 +0200 schrieb Ilkka Koivistoinen:
How this work? I need to pass parameter DPORT=1067 to tell to client to
ask ip from ports 1067,1068. Then I need to tell to use different nfs
frame size because of 100 - 10 mbps net converter.
host ws543{
Am Dienstag, den 29.11.2005, 08:57 -0400 schrieb Catherine Stéfan:
Hello,
I have seen on this list a discussion about LTSP over WAN. I would be very
interested to implement it but I could not find any documentation about it.
Is there any URL where I could find something ? If not, what are
Am Mittwoch, den 16.11.2005, 09:50 +0100 schrieb Eilert:
Hi,
I'm playing with a new client, a Mini-ITX Thin Client. There are two
things I cannot solve:
1. When I attach my printer to its lp0, it says nothing. The values in
lts.conf etc. are all correct. Yast says, there is a printer
Am Mittwoch, den 16.11.2005, 20:08 +0200 schrieb Gareth Allen:
Hi All,
I'm trying to setup authentication between my proxy box and I'm not
sure how to go about this. I'm trying to find a way of seeing which
user is viewing which site, but obviously the problem I've run into is
that the logs
Am Montag, den 14.11.2005, 08:20 +0200 schrieb Gareth Allen:
Hi all,
I upgraded my server and suddenly when I try boot my thin clients they
find dhcp, but do not load. The server sais that its offering dhcp to
the clients, they accept, but they wont load. Any ideas what could've
broken?
If
Am Freitag, den 04.11.2005, 11:08 -0500 schrieb Tommy Leak:
Thank you so much for your time. I am working on a project to convert
a 200 seat call center from Windows-based agent PCs to LTSP. There is
one application that the managers find critical to be able to run in
order to convert to
Am Freitag, den 04.11.2005, 11:15 + schrieb Alex Harrington:
Just a heads up for those who may not have seen these..
http://www.chippc.com/products/thinclients/jackpc/
Definitly a very nice idea.
Does anybody have any ideas RE: LTSP compatibility?
This looks like a nice-to-have on
Am Montag, den 31.10.2005, 15:40 +0100 schrieb Norbert Perk:
Hello,
I have a ltsp server and a windows rdesktop server running. Both work
fine.
When starting a thin client with ltsp4.1.1 it does not always start
screen_01 as desired (linux login from ltsp server) but sometimes starts
Am Donnerstag, den 20.10.2005, 01:03 +0200 schrieb Mario Minati:
Hi folks,
I have a problem understanding how ltsp works.
First I'll would like to describe my goal, than my question is easier to
understand.
1. The users shall use thin clients with an ltsp server
2. The users are working
Am Dienstag, den 11.10.2005, 17:41 -0500 schrieb Childers, Matthew:
We currently use Altiris Deployment Solutions for imaging clients
throughout the district. Typically when a client in the field needs
re-imaged, we will PXE boot that client and Image it via Altiris’ PXE
Server. Now that we
Am Dienstag, den 20.09.2005, 16:16 +0100 schrieb David Mummery:
Hi all.
We'd like to create a Linux CD that can be used to boot a server, which
launches LTSP server in RAM and only issues a Citrix client login screen to
LTSP workstations.
I don't know about any citrix client software, but I
Am Freitag, den 16.09.2005, 21:35 +0100 schrieb Simon Langley:
I use a laptop as an LTSP client. I can watch films on it fine on a wired
network so there is no fundamental problem. When I am using an 802.11g
(=54Mbps) it's hideously slow and choppy, running at about a quarter of the
correct
Am Dienstag, den 13.09.2005, 20:39 +1200 schrieb Adam Bogacki:
Thanks Jim,
I have copied output from tcpdump and netstat below - at least
the cable and connections are working, together with the
original error message.
(1) tcpdump
Tux:/var/log# tcpdump -i eth1 port 67
tcpdump: verbose
Am Freitag, den 09.09.2005, 01:07 -0400 schrieb Coach Basti:
Hello guys.
Hi,
...please try putting reasonable Subject: lines into your mail...
I'm running an LTSP setup with multiple servers. In a nutshell, I'm
trying to create a chat program for the servers using JAVA Socket and
1 - 100 of 509 matches
Mail list logo