On Tue, 5 Mar 2002, Richard Wang wrote:
How about for the feature Lyx does not offer? For example bold italic
In the help, we see:
*bold italic*
By default you get always upright letters if you mark the charcaters and
make them bold with ctrl-b To get bold italic characters write in
Juergen == Juergen Fenn [EMAIL PROTECTED] writes:
Juergen Giorgio Corani schrieb:
File- Import-Latex
and you're done:=)
Juergen I'm afraid not. I have not managed to import any of my LaTeX
Juergen files into LyX so far. Importing LaTeX into LyX seems to be
Juergen harder than it appears at
Hi All!
After hacking loads of ERT into LyX (psfrag)
- Are there any plans to let LyX behave better in ERT-Mode? ie not
insert \par or \centering (or whatever my paragraph may be), but have an:
\begin{ERT}
do nothing except the ERT
\end{ERT}
(I suppose the 120cvs ERT-inset is supposed to
I just bought a wheelmouse...
i'd like to have the following (using Linux)
When button 1 is pressed, the wheel does a cursor down to select text.
Instead of the wheel scrolling one frame at a time (ala PageDown) I'd like to
have a smooth scroll (ala scrollbar).
Is this an xforms issue, or a
On Tue, 5 Mar 2002 11:50:11 +0100 wrote Niklas Werner [EMAIL PROTECTED]:
After hacking loads of ERT into LyX (psfrag...)...
- Are there any plans to let LyX behave better in ERT-Mode? ie not
insert \par or \centering (or whatever my paragraph may be), but have an:
\begin{ERT}
do nothing
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on the same page, so I can see
I have generated a tex file pointing to an auxiliary file ps with
gnuplot I have inputted this file in a figure float How can I center the
figure?
With figures exported in both latex and postscript by xfig, I simply
surrounded the inputted file with the latex commands
Davide Cavallari wrote:
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on
Hi all,
I have some very large figures to include in a document What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height), but the rest of the text is in
portrait format They need to be in a float so I can include a caption
Any
On Tue, 5 Mar 2002, Davide Cavallari wrote:
I have generated a tex file pointing to an auxiliary file ps with
gnuplot I have inputted this file in a figure float How can I center
the figure?
make an input-button in the center of figure float using
layout -- paragraph -- center
you don't
On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document. What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height), but the rest of the text is in
portrait format. They need
Hi,
I find the \intcan not be shown
on the lyx, and the subscript doesn't look right for some character e.g.
u^n. Although these features do not cause any problem on dvi file, I am
wondering if my software need to be updated to fixed4.
Does everybody have the same
situation?
Richard
Giorgio Corani wrote:
Dear all,
i'm writing an english paper for an international conference
The paper has to be formatted according to the organizer supplied latex
style, which is called iemsssty I've installed it without any problem
running texhash
My lyx document is a two column
On Tuesday 05 March 2002 20:02, Herbert Voss wrote:
On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document. What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height),
On Mon, Mar 04, 2002 at 10:13:42AM -0500, Matej Cepl wrote:
On Mon, Mar 04, 2002 at 08:37:22AM +0100, Herbert Voss wrote:
what about this?
http://wwwlyxorg/help/table/vlinephp
Well, almost See attached example -- I have to use multicolumn
(because of the last subheading) and of course
On Tue, Mar 05, 2002 at 07:02:11PM +0100, Herbert Voss wrote:
On Tuesday, 5 March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width
Matej Cepl wrote:
Hi,
just a question, whether there are plans to support booktabs
package in LyX? The package makes _much_ prettier tables and
implementation in LyX would need just an ability to distinguish
between three kinds of the \hline (\toprule, \midrule, and
\bottomrule)
On Tue, Mar 05, 2002 at 06:33:50PM -0300, Roberto Hernandez wrote:
The documentation for the fancyhdr package has instructions for creating
book tabs. I haven't really used it, but I know it's there.
[tito@localhost tito]$ locate fancyhdr.dvi
On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
Use the following hack:
Delete the \midrule from the multicolumn cell.
Now, go to the last cell in the row above the multicolumn, and
write the following at the end of the cell in latex mode '\\
\midrule %' The percent char is
Matej Cepl wrote:
On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
You meant \bottomrule, didn't you? There is no problem with
inserting \toprule to the first cell of the table directly
(actually, I have no idea, how could one use your trick to insert
\toprule, because there is
Hi:
I have searched the mail archives to the best of my ability and can find no solutions to the following problem:
I open the LyX Users Guide in LyX and I try to view thesection regarding figures (4.3.1 I thiink). But I only see a blank box. If I click on the figure box I can view the full
On Tuesday 05 March 2002 20:59, Robin Turner wrote:
I dream of a super-LyX with it's own TeX-spider which will constantly check
CTAN for packages which it thinks I might find useful and, based on what
I'm trying to do, include whichever one is most important. There again, by
that time, AI
On Tue, 5 Mar 2002, Richard Wang wrote:
How about for the feature Lyx does not offer? For example bold italic
In the help, we see:
*bold italic*
By default you get always upright letters if you mark the charcaters and
make them bold with ctrl-b To get bold italic characters write in
Juergen == Juergen Fenn [EMAIL PROTECTED] writes:
Juergen Giorgio Corani schrieb:
File- Import-Latex
and you're done:=)
Juergen I'm afraid not. I have not managed to import any of my LaTeX
Juergen files into LyX so far. Importing LaTeX into LyX seems to be
Juergen harder than it appears at
Hi All!
After hacking loads of ERT into LyX (psfrag)
- Are there any plans to let LyX behave better in ERT-Mode? ie not
insert \par or \centering (or whatever my paragraph may be), but have an:
\begin{ERT}
do nothing except the ERT
\end{ERT}
(I suppose the 120cvs ERT-inset is supposed to
I just bought a wheelmouse...
i'd like to have the following (using Linux)
When button 1 is pressed, the wheel does a cursor down to select text.
Instead of the wheel scrolling one frame at a time (ala PageDown) I'd like to
have a smooth scroll (ala scrollbar).
Is this an xforms issue, or a
On Tue, 5 Mar 2002 11:50:11 +0100 wrote Niklas Werner [EMAIL PROTECTED]:
After hacking loads of ERT into LyX (psfrag...)...
- Are there any plans to let LyX behave better in ERT-Mode? ie not
insert \par or \centering (or whatever my paragraph may be), but have an:
\begin{ERT}
do nothing
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on the same page, so I can see
I have generated a tex file pointing to an auxiliary file ps with
gnuplot I have inputted this file in a figure float How can I center the
figure?
With figures exported in both latex and postscript by xfig, I simply
surrounded the inputted file with the latex commands
Davide Cavallari wrote:
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on
Hi all,
I have some very large figures to include in a document What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height), but the rest of the text is in
portrait format They need to be in a float so I can include a caption
Any
On Tue, 5 Mar 2002, Davide Cavallari wrote:
I have generated a tex file pointing to an auxiliary file ps with
gnuplot I have inputted this file in a figure float How can I center
the figure?
make an input-button in the center of figure float using
layout -- paragraph -- center
you don't
On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document. What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height), but the rest of the text is in
portrait format. They need
Hi,
I find the \intcan not be shown
on the lyx, and the subscript doesn't look right for some character e.g.
u^n. Although these features do not cause any problem on dvi file, I am
wondering if my software need to be updated to fixed4.
Does everybody have the same
situation?
Richard
Giorgio Corani wrote:
Dear all,
i'm writing an english paper for an international conference
The paper has to be formatted according to the organizer supplied latex
style, which is called iemsssty I've installed it without any problem
running texhash
My lyx document is a two column
On Tuesday 05 March 2002 20:02, Herbert Voss wrote:
On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document. What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width height),
On Mon, Mar 04, 2002 at 10:13:42AM -0500, Matej Cepl wrote:
On Mon, Mar 04, 2002 at 08:37:22AM +0100, Herbert Voss wrote:
what about this?
http://wwwlyxorg/help/table/vlinephp
Well, almost See attached example -- I have to use multicolumn
(because of the last subheading) and of course
On Tue, Mar 05, 2002 at 07:02:11PM +0100, Herbert Voss wrote:
On Tuesday, 5 March 2002 17:37, Roberto Hernandez wrote:
I have some very large figures to include in a document What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width
Matej Cepl wrote:
Hi,
just a question, whether there are plans to support booktabs
package in LyX? The package makes _much_ prettier tables and
implementation in LyX would need just an ability to distinguish
between three kinds of the \hline (\toprule, \midrule, and
\bottomrule)
On Tue, Mar 05, 2002 at 06:33:50PM -0300, Roberto Hernandez wrote:
The documentation for the fancyhdr package has instructions for creating
book tabs. I haven't really used it, but I know it's there.
[tito@localhost tito]$ locate fancyhdr.dvi
On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
Use the following hack:
Delete the \midrule from the multicolumn cell.
Now, go to the last cell in the row above the multicolumn, and
write the following at the end of the cell in latex mode '\\
\midrule %' The percent char is
Matej Cepl wrote:
On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
You meant \bottomrule, didn't you? There is no problem with
inserting \toprule to the first cell of the table directly
(actually, I have no idea, how could one use your trick to insert
\toprule, because there is
Hi:
I have searched the mail archives to the best of my ability and can find no solutions to the following problem:
I open the LyX Users Guide in LyX and I try to view thesection regarding figures (4.3.1 I thiink). But I only see a blank box. If I click on the figure box I can view the full
On Tuesday 05 March 2002 20:59, Robin Turner wrote:
I dream of a super-LyX with it's own TeX-spider which will constantly check
CTAN for packages which it thinks I might find useful and, based on what
I'm trying to do, include whichever one is most important. There again, by
that time, AI
On Tue, 5 Mar 2002, Richard Wang wrote:
> How about for the feature Lyx does not offer? For example bold italic.
> In the help, we see:
>
> *bold italic*
>
> By default you get always upright letters if you mark the charcaters and
> make them bold with ctrl-b. To get bold italic characters
> "Juergen" == Juergen Fenn <[EMAIL PROTECTED]> writes:
Juergen> Giorgio Corani schrieb:
File-> Import->Latex
>> and you're done:=)
Juergen> I'm afraid not. I have not managed to import any of my LaTeX
Juergen> files into LyX so far. Importing LaTeX into LyX seems to be
Juergen> harder
Hi All!
After hacking loads of ERT into LyX (psfrag...)...
-> Are there any plans to let LyX behave better in ERT-Mode? ie not
insert \par or \centering (or whatever my paragraph may be), but have an:
\begin{ERT}
do nothing except the ERT
\end{ERT}
(I suppose the 1.20cvs ERT-inset is
I just bought a wheelmouse...
i'd like to have the following (using Linux)
When button 1 is pressed, the wheel does a cursor down to select text.
Instead of the wheel scrolling one frame at a time (ala PageDown) I'd like to
have a smooth scroll (ala scrollbar).
Is this an xforms issue, or a
On Tue, 5 Mar 2002 11:50:11 +0100 wrote Niklas Werner <[EMAIL PROTECTED]>:
> After hacking loads of ERT into LyX (psfrag...)...
>
> -> Are there any plans to let LyX behave better in ERT-Mode? ie not
> insert \par or \centering (or whatever my paragraph may be), but have an:
> \begin{ERT}
> do
I have 16 figures which show the same thing at 16 different steps. So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on.
I have opened a figure float and inputted all the 16 *.tex files in it.
But all are put on the same page, so I can see
I have generated a .tex file pointing to an auxiliary file .ps with
gnuplot. I have inputted this file in a figure float. How can I center the
figure?
With figures exported in both latex and postscript by xfig, I simply
surrounded the inputted file with the latex commands
Davide Cavallari wrote:
>
> I have 16 figures which show the same thing at 16 different steps. So I
> would like to have only one figure with 16 sub-figures labeled with (a),
> (b), (c), and so on.
>
> I have opened a figure float and inputted all the 16 *.tex files in it.
> But all
Hi all,
I have some very large figures to include in a document. What I'd like
to do is include them in a page of their own in landscape format (the
images are such that width > height), but the rest of the text is in
portrait format. They need to be in a float so I can include a caption.
On Tue, 5 Mar 2002, Davide Cavallari wrote:
> I have generated a .tex file pointing to an auxiliary file .ps with
> gnuplot. I have inputted this file in a figure float. How can I center
> the figure?
make an input-button in the center of figure float using
layout --> paragraph --> center.
On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
> I have some very large figures to include in a document. What I'd like
> to do is include them in a page of their own in landscape format (the
> images are such that width > height), but the rest of the text is in
> portrait format. They
Hi,
I find the \int can not be shown
on the lyx, and the subscript doesn't look right for some character e.g.
u^n. Although these features do not cause any problem on dvi file, I am
wondering if my software need to be updated to fixed4.
Does everybody have the same
situation?
Giorgio Corani wrote:
> Dear all,
> i'm writing an english paper for an international conference.
> The paper has to be formatted according to the organizer supplied latex
> style, which is called iemss.sty. I've installed it without any problem
> running texhash.
> My lyx document is a two
On Tuesday 05 March 2002 20:02, Herbert Voss wrote:
> On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
> > I have some very large figures to include in a document. What I'd like
> > to do is include them in a page of their own in landscape format (the
> > images are such that width >
On Mon, Mar 04, 2002 at 10:13:42AM -0500, Matej Cepl wrote:
> On Mon, Mar 04, 2002 at 08:37:22AM +0100, Herbert Voss wrote:
> > what about this?
> >
> > http://www.lyx.org/help/table/vline.php
>
> Well, almost. See attached example -- I have to use multicolumn
> (because of the last subheading)
On Tue, Mar 05, 2002 at 07:02:11PM +0100, Herbert Voss wrote:
> On Tuesday, 5. March 2002 17:37, Roberto Hernandez wrote:
> > I have some very large figures to include in a document. What I'd like
> > to do is include them in a page of their own in landscape format (the
> > images are such that
Matej Cepl wrote:
> Hi,
>
> just a question, whether there are plans to support booktabs
> package in LyX? The package makes _much_ prettier tables and
> implementation in LyX would need just an ability to distinguish
> between three kinds of the \hline (\toprule, \midrule, and
> \bottomrule).
On Tue, Mar 05, 2002 at 06:33:50PM -0300, Roberto Hernandez wrote:
> The documentation for the fancyhdr package has instructions for creating
> book tabs. I haven't really used it, but I know it's there.
>
> [tito@localhost tito]$ locate fancyhdr.dvi
>
On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
> Use the following hack:
> Delete the \midrule from the multicolumn cell.
> Now, go to the last cell in the row above the multicolumn, and
> write the following at the end of the cell in latex mode '\\
> \midrule %' The percent char is
Matej Cepl wrote:
> On Tue, Mar 05, 2002 at 11:04:34PM +0200, Dekel Tsur wrote:
>
> You meant \bottomrule, didn't you? There is no problem with
> inserting \toprule to the first cell of the table directly
> (actually, I have no idea, how could one use your trick to insert
> \toprule, because
Hi:
I have searched the mail archives to the best of my ability and can find no solutions to the following problem:
I open the LyX Users Guide in LyX and I try to view the section regarding figures (4.3.1 I thiink). But I only see a blank box. If I click on the figure box I can view the full
On Tuesday 05 March 2002 20:59, Robin Turner wrote:
>
> I dream of a super-LyX with it's own TeX-spider which will constantly check
> CTAN for packages which it thinks I might find useful and, based on what
> I'm trying to do, include whichever one is most important. There again, by
> that time,
66 matches
Mail list logo