John == John Levon [EMAIL PROTECTED] writes:
John On Thu, Feb 27, 2003 at 12:14:21PM +0100, Jean-Marc Lasgouttes
John wrote:
John, something that looks suspiscious is that
qfont_loader.C:addFontPath() does not return a success value, so it
is difficult to assess whether we have a font.
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work anymore.
Thank you, JOhannes Breu
Jean-Marc Lasgouttes wrote:
Helge == Helge Hafting [EMAIL PROTECTED] writes:
Helge Nice, but not exactly intuitive for those who don't know latex.
Helge How about having a insert-paragraph break that does the
Helge same, user-friendly?
The notion of paragraph break is not very intuitive either.
On Fri, Feb 28, 2003 at 11:40:49AM +0800, Tan Choong Leong wrote:
Using Cygwin, Miktex and recently upgraded Lyx 1.2.2 to 1.3.
As above, I wanted to insert an algorithm float actually. I click on
Insert-Floats-Floatflt Figure. It gives me the usual figure box but with the title
wrap:figure
Dear list
Have just upgraded to 1.3 on windows XP pro, lyx support 1.7, Cygwin and
Miktex
Two problems so far.
1. lyx does not appear to read the lyxrc file any more. I cannot
control mouse wheel scrolling event and other user options.
2. Math symbols not showing correctly (as per previous
On Friday 28 February 2003 05:43, Breu, Johannes Martin wrote:
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I created a bibtex style via makebst. I used it to replace a previous version
of the same name. The original version listed articles in the bibliography
based on order cited. I changed it so the authors would be listed
alphabetically. I ran
Dekel == Dekel Tsur [EMAIL PROTECTED] writes:
Dekel If you use your own layout file, (or a modified version of a
Dekel layout file that comes with LyX, you should add Input
Dekel stdfloats.inc to the layout file.
And probably Input stdcounters.inc too.
JMarc
Rob == Rob S [EMAIL PROTECTED] writes:
Rob Dear list Have just upgraded to 1.3 on windows XP pro, lyx
Rob support 1.7, Cygwin and Miktex
Rob Two problems so far.
Rob 1. lyx does not appear to read the lyxrc file any more. I cannot
Rob control mouse wheel scrolling event and other user options.
Breu, Johannes Martin wrote:
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work anymore.
deb
Praedor Atrebates wrote:
It doesn't take.
Selecting the bst style and previewing the document STILL shows the authors
are listed in citation order rather than alphabetical. What is wrong here?
Are you shure that your bst file is correct? What happens if you change the
name of the file?
On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes wrote:
I see this particular problem, and I am on a system where fontconfig
is _not_ used. We should make sure that this one works too...
Then Dekel's changes to lib/symbols must have been broken, or there is
some other fault.
John == John Levon [EMAIL PROTECTED] writes:
John On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes
John wrote:
I see this particular problem, and I am on a system where
fontconfig is _not_ used. We should make sure that this one works
too...
John Then Dekel's changes to
Nathan Weston wrote:
I built it from source a few days ago, without much trouble. However, I am
running debian unstable, so you might find that you need to upgrade some
packages in order to build it.
I also had to install latex-ttf-fonts to get math symbols working. There is
an rpm for
On Fri, 2003-02-28 at 17:11, Praedor Atrebates wrote:
Selecting the bst style and previewing the document STILL shows the authors
are listed in citation order rather than alphabetical. What is wrong here?
Are you sure you don't have another copy of the original .bst file
somewhere? Try
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have acquired ps2eps and have used it on a postscript file of a figure I
created with StarDraw. StarDraw ps output, even its export to eps,
often/usually has extra whitespace included in the product and in this
particular case, the whitespace is
I am writing university lectures using lyx 1.2.1 and have noticed what
seems like a bug. When I include a postscript file in my document and
then Export-Postscript the postscript seems to be rendered as a low
resolution bit map and is typically unreadable. However, if I
Export-Latex and then
Hi all,
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm from
the lyx site, qt frontend). I can set the option allright, but it seems to be
blissfully ignored. I get letter-sized output regardless of what I choose (I
tried A4, US Executive and a few more).
Is this a
Hi.. does anyone know if there's a converter that takes a powerpoint
file and converts it to LaTeX or LyX?
Thanks,
nirmal
Hi I was using Starnet Xwin32, but because it is an evaluation program I
switched to XFree86. It works fine, but when it displays formulas like
for example \theta it displays a \mu. When I create the dvi it shows
the theta. So I don't know is some type of configurations. Does
someone has
I have a LyX layout that I used with 1.1.6 to write my master's thesis,
but it isn't working quite right with 1.3.0. In particular, I have the
following for the layout preamble:
Preamble
\def\bibname{BIBLIOGRAPHY}
[EMAIL PROTECTED]
{\specialchapt{\bibname
[EMAIL
Nirmal Govind wrote:
Hi.. does anyone know if there's a converter that takes a powerpoint
file and converts it to LaTeX or LyX?
Probably not, but you can export PowerPoint to RTF (for outline)
and set of HTML/PNG files, which can be all then assembled into
LyX/LaTeX-based presentation.
Matej
On Fri, Feb 28, 2003 at 02:32:00PM -0700, Fernando Perez wrote:
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
from the lyx site, qt frontend). I can set the option allright, but it
seems to be blissfully ignored. I get letter-sized output regardless of
what I
John Levon wrote:
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
from the lyx site, qt frontend). I can set the option allright, but it
seems to be blissfully ignored. I get letter-sized output regardless of
what I choose (I tried A4, US Executive and a few more).
John Levon wrote:
On Fri, Feb 28, 2003 at 05:57:05PM -0700, Fernando Perez wrote:
No problem. When you say fixed, does it mean that 1.3.1 will have the fix
in (whenever it's out), or is it something deeper which will have to wait
until 1.4?
1.3.1 will have the fix -
Thanks!
I have figured out that standard article class does not have algorithm
floats and table floats. Funny? Before the upgrade, they were there.
Anyway, I have changed the class to article(AMS) and the floats are
back. I will also take your suggestion to input stdfloats.inc. However,
I added
You just missed a thread about this (is there an archive for this list
somewhere?)
Make sure that you have latex-ttf-fonts installed (available on ftp.lyx.org),
and that your XftConfig includes the directory where those fonts are. This
should fix the problem.
Nathan
On Friday 28 February 2003
Thanks for trying this.
Just had a further look, and I'm guessing that you're trying to get output
as in example 2 of instraut.ps, where the authors are one after the other,
followed by addresses? I have to admit, this isn't a format I've ever had
to use, so I didn't think of it.
You are
Vaclav == Vaclav Smidl [EMAIL PROTECTED] writes:
Vaclav (I had to change Author_Address to AuthorAddress. It does not
Vaclav work with CopyStyle! lyx announce it does not know
Vaclav Author_Address but 'Author Address' which does not work
Vaclav eather. AuthorAddress is safe enough.)
What works
John == John Levon [EMAIL PROTECTED] writes:
John On Thu, Feb 27, 2003 at 12:14:21PM +0100, Jean-Marc Lasgouttes
John wrote:
John, something that looks suspiscious is that
qfont_loader.C:addFontPath() does not return a success value, so it
is difficult to assess whether we have a font.
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work anymore.
Thank you, JOhannes Breu
Jean-Marc Lasgouttes wrote:
Helge == Helge Hafting [EMAIL PROTECTED] writes:
Helge Nice, but not exactly intuitive for those who don't know latex.
Helge How about having a insert-paragraph break that does the
Helge same, user-friendly?
The notion of paragraph break is not very intuitive either.
On Fri, Feb 28, 2003 at 11:40:49AM +0800, Tan Choong Leong wrote:
Using Cygwin, Miktex and recently upgraded Lyx 1.2.2 to 1.3.
As above, I wanted to insert an algorithm float actually. I click on
Insert-Floats-Floatflt Figure. It gives me the usual figure box but with the title
wrap:figure
Dear list
Have just upgraded to 1.3 on windows XP pro, lyx support 1.7, Cygwin and
Miktex
Two problems so far.
1. lyx does not appear to read the lyxrc file any more. I cannot
control mouse wheel scrolling event and other user options.
2. Math symbols not showing correctly (as per previous
On Friday 28 February 2003 05:43, Breu, Johannes Martin wrote:
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I created a bibtex style via makebst. I used it to replace a previous version
of the same name. The original version listed articles in the bibliography
based on order cited. I changed it so the authors would be listed
alphabetically. I ran
Dekel == Dekel Tsur [EMAIL PROTECTED] writes:
Dekel If you use your own layout file, (or a modified version of a
Dekel layout file that comes with LyX, you should add Input
Dekel stdfloats.inc to the layout file.
And probably Input stdcounters.inc too.
JMarc
Rob == Rob S [EMAIL PROTECTED] writes:
Rob Dear list Have just upgraded to 1.3 on windows XP pro, lyx
Rob support 1.7, Cygwin and Miktex
Rob Two problems so far.
Rob 1. lyx does not appear to read the lyxrc file any more. I cannot
Rob control mouse wheel scrolling event and other user options.
Breu, Johannes Martin wrote:
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work anymore.
deb
Praedor Atrebates wrote:
It doesn't take.
Selecting the bst style and previewing the document STILL shows the authors
are listed in citation order rather than alphabetical. What is wrong here?
Are you shure that your bst file is correct? What happens if you change the
name of the file?
On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes wrote:
I see this particular problem, and I am on a system where fontconfig
is _not_ used. We should make sure that this one works too...
Then Dekel's changes to lib/symbols must have been broken, or there is
some other fault.
John == John Levon [EMAIL PROTECTED] writes:
John On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes
John wrote:
I see this particular problem, and I am on a system where
fontconfig is _not_ used. We should make sure that this one works
too...
John Then Dekel's changes to
Nathan Weston wrote:
I built it from source a few days ago, without much trouble. However, I am
running debian unstable, so you might find that you need to upgrade some
packages in order to build it.
I also had to install latex-ttf-fonts to get math symbols working. There is
an rpm for
On Fri, 2003-02-28 at 17:11, Praedor Atrebates wrote:
Selecting the bst style and previewing the document STILL shows the authors
are listed in citation order rather than alphabetical. What is wrong here?
Are you sure you don't have another copy of the original .bst file
somewhere? Try
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have acquired ps2eps and have used it on a postscript file of a figure I
created with StarDraw. StarDraw ps output, even its export to eps,
often/usually has extra whitespace included in the product and in this
particular case, the whitespace is
I am writing university lectures using lyx 1.2.1 and have noticed what
seems like a bug. When I include a postscript file in my document and
then Export-Postscript the postscript seems to be rendered as a low
resolution bit map and is typically unreadable. However, if I
Export-Latex and then
Hi all,
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm from
the lyx site, qt frontend). I can set the option allright, but it seems to be
blissfully ignored. I get letter-sized output regardless of what I choose (I
tried A4, US Executive and a few more).
Is this a
Hi.. does anyone know if there's a converter that takes a powerpoint
file and converts it to LaTeX or LyX?
Thanks,
nirmal
Hi I was using Starnet Xwin32, but because it is an evaluation program I
switched to XFree86. It works fine, but when it displays formulas like
for example \theta it displays a \mu. When I create the dvi it shows
the theta. So I don't know is some type of configurations. Does
someone has
I have a LyX layout that I used with 1.1.6 to write my master's thesis,
but it isn't working quite right with 1.3.0. In particular, I have the
following for the layout preamble:
Preamble
\def\bibname{BIBLIOGRAPHY}
[EMAIL PROTECTED]
{\specialchapt{\bibname
[EMAIL
Nirmal Govind wrote:
Hi.. does anyone know if there's a converter that takes a powerpoint
file and converts it to LaTeX or LyX?
Probably not, but you can export PowerPoint to RTF (for outline)
and set of HTML/PNG files, which can be all then assembled into
LyX/LaTeX-based presentation.
Matej
On Fri, Feb 28, 2003 at 02:32:00PM -0700, Fernando Perez wrote:
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
from the lyx site, qt frontend). I can set the option allright, but it
seems to be blissfully ignored. I get letter-sized output regardless of
what I
John Levon wrote:
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
from the lyx site, qt frontend). I can set the option allright, but it
seems to be blissfully ignored. I get letter-sized output regardless of
what I choose (I tried A4, US Executive and a few more).
John Levon wrote:
On Fri, Feb 28, 2003 at 05:57:05PM -0700, Fernando Perez wrote:
No problem. When you say fixed, does it mean that 1.3.1 will have the fix
in (whenever it's out), or is it something deeper which will have to wait
until 1.4?
1.3.1 will have the fix -
Thanks!
I have figured out that standard article class does not have algorithm
floats and table floats. Funny? Before the upgrade, they were there.
Anyway, I have changed the class to article(AMS) and the floats are
back. I will also take your suggestion to input stdfloats.inc. However,
I added
You just missed a thread about this (is there an archive for this list
somewhere?)
Make sure that you have latex-ttf-fonts installed (available on ftp.lyx.org),
and that your XftConfig includes the directory where those fonts are. This
should fix the problem.
Nathan
On Friday 28 February 2003
Thanks for trying this.
Just had a further look, and I'm guessing that you're trying to get output
as in example 2 of instraut.ps, where the authors are one after the other,
followed by addresses? I have to admit, this isn't a format I've ever had
to use, so I didn't think of it.
You are
Vaclav == Vaclav Smidl [EMAIL PROTECTED] writes:
Vaclav (I had to change Author_Address to AuthorAddress. It does not
Vaclav work with CopyStyle! lyx announce it does not know
Vaclav Author_Address but 'Author Address' which does not work
Vaclav eather. AuthorAddress is safe enough.)
What works
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> On Thu, Feb 27, 2003 at 12:14:21PM +0100, Jean-Marc Lasgouttes
John> wrote:
>> John, something that looks suspiscious is that
>> qfont_loader.C:addFontPath() does not return a success value, so it
>> is difficult to assess whether we
Is there anybody who has experience with the installation of lyx 1.3.0
on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
did not work anymore.
Thank you, JOhannes Breu
Jean-Marc Lasgouttes wrote:
"Helge" == Helge Hafting <[EMAIL PROTECTED]> writes:
Helge> Nice, but not exactly intuitive for those who don't know latex.
Helge> How about having a "insert->paragraph break" that does the
Helge> same, user-friendly?
The notion of paragraph break is not very intuitive
On Fri, Feb 28, 2003 at 11:40:49AM +0800, Tan Choong Leong wrote:
> Using Cygwin, Miktex and recently upgraded Lyx 1.2.2 to 1.3.
>
> As above, I wanted to insert an algorithm float actually. I click on
> Insert->Floats->Floatflt Figure. It gives me the usual figure box but with the title
>
Dear list
Have just upgraded to 1.3 on windows XP pro, lyx support 1.7, Cygwin and
Miktex
Two problems so far.
1. lyx does not appear to read the lyxrc file any more. I cannot
control mouse wheel scrolling event and other user options.
2. Math symbols not showing correctly (as per previous
On Friday 28 February 2003 05:43, Breu, Johannes Martin wrote:
> Is there anybody who has experience with the installation of lyx 1.3.0
> on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
> bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
> did not work
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I created a bibtex style via makebst. I used it to replace a previous version
of the same name. The original version listed articles in the bibliography
based on order cited. I changed it so the authors would be listed
alphabetically. I ran
> "Dekel" == Dekel Tsur <[EMAIL PROTECTED]> writes:
Dekel> If you use your own layout file, (or a modified version of a
Dekel> layout file that comes with LyX, you should add Input
Dekel> stdfloats.inc to the layout file.
And probably Input stdcounters.inc too.
JMarc
> "Rob" == Rob S <[EMAIL PROTECTED]> writes:
Rob> Dear list Have just upgraded to 1.3 on windows XP pro, lyx
Rob> support 1.7, Cygwin and Miktex
Rob> Two problems so far.
Rob> 1. lyx does not appear to read the lyxrc file any more. I cannot
Rob> control mouse wheel scrolling event and other
Breu, Johannes Martin wrote:
> Is there anybody who has experience with the installation of lyx 1.3.0
> on Debian 3.0_r1? Maybe binaries. I wish to install it but I made very
> bad experiences in installing lyx 1.3.0 on Debian 2.2 - latex and lyx
> did not work anymore.
deb
Praedor Atrebates wrote:
> It doesn't take.
>
> Selecting the bst style and previewing the document STILL shows the authors
> are listed in citation order rather than alphabetical. What is wrong here?
Are you shure that your bst file is correct? What happens if you change the
name of the
On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes wrote:
> I see this particular problem, and I am on a system where fontconfig
> is _not_ used. We should make sure that this one works too...
Then Dekel's changes to lib/symbols must have been broken, or there is
some other fault.
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> On Fri, Feb 28, 2003 at 10:16:00AM +0100, Jean-Marc Lasgouttes
John> wrote:
>> I see this particular problem, and I am on a system where
>> fontconfig is _not_ used. We should make sure that this one works
>> too...
John> Then Dekel's
Nathan Weston wrote:
> I built it from source a few days ago, without much trouble. However, I am
> running debian unstable, so you might find that you need to upgrade some
> packages in order to build it.
>I also had to install latex-ttf-fonts to get math symbols working. There is
> an rpm
On Fri, 2003-02-28 at 17:11, Praedor Atrebates wrote:
>
> Selecting the bst style and previewing the document STILL shows the authors
> are listed in citation order rather than alphabetical. What is wrong here?
Are you sure you don't have another copy of the original .bst file
somewhere? Try
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have acquired ps2eps and have used it on a postscript file of a figure I
created with StarDraw. StarDraw ps output, even its export to eps,
often/usually has extra whitespace included in the product and in this
particular case, the whitespace is
I am writing university lectures using lyx 1.2.1 and have noticed what
seems like a bug. When I include a postscript file in my document and
then "Export->Postscript" the postscript seems to be rendered as a low
resolution bit map and is typically unreadable. However, if I
"Export->Latex" and
Hi all,
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm from
the lyx site, qt frontend). I can set the option allright, but it seems to be
blissfully ignored. I get letter-sized output regardless of what I choose (I
tried A4, US Executive and a few more).
Is this a
Hi.. does anyone know if there's a converter that takes a powerpoint
file and converts it to LaTeX or LyX?
Thanks,
nirmal
Hi I was using Starnet Xwin32, but because it is an evaluation program I
switched to XFree86. It works fine, but when it displays formulas like
for example \theta it displays a \mu. When I create the dvi it shows
the theta. So I don't know is some type of configurations. Does
someone has
I have a LyX layout that I used with 1.1.6 to write my master's thesis,
but it isn't working quite right with 1.3.0. In particular, I have the
following for the layout preamble:
Preamble
\def\bibname{BIBLIOGRAPHY}
[EMAIL PROTECTED]
{\specialchapt{\bibname
[EMAIL
Nirmal Govind wrote:
> Hi.. does anyone know if there's a converter that takes a powerpoint
> file and converts it to LaTeX or LyX?
Probably not, but you can export PowerPoint to RTF (for outline)
and set of HTML/PNG files, which can be all then assembled into
LyX/LaTeX-based presentation.
On Fri, Feb 28, 2003 at 02:32:00PM -0700, Fernando Perez wrote:
> I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
> from the lyx site, qt frontend). I can set the option allright, but it
> seems to be blissfully ignored. I get letter-sized output regardless of
> what
John Levon wrote:
I just tried to use the paper size option in lyx 1.3.0 (the redhat8 rpm
from the lyx site, qt frontend). I can set the option allright, but it
seems to be blissfully ignored. I get letter-sized output regardless of
what I choose (I tried A4, US Executive and a few more).
John Levon wrote:
On Fri, Feb 28, 2003 at 05:57:05PM -0700, Fernando Perez wrote:
No problem. When you say fixed, does it mean that 1.3.1 will have the fix
in (whenever it's out), or is it something deeper which will have to wait
until 1.4?
1.3.1 will have the fix -
Thanks!
I have figured out that standard article class does not have algorithm
floats and table floats. Funny? Before the upgrade, they were there.
Anyway, I have changed the class to article(AMS) and the floats are
back. I will also take your suggestion to input stdfloats.inc. However,
I added
You just missed a thread about this (is there an archive for this list
somewhere?)
Make sure that you have latex-ttf-fonts installed (available on ftp.lyx.org),
and that your XftConfig includes the directory where those fonts are. This
should fix the problem.
Nathan
On Friday 28 February 2003
Thanks for trying this.
> Just had a further look, and I'm guessing that you're trying to get output
> as in example 2 of instraut.ps, where the authors are one after the other,
> followed by addresses? I have to admit, this isn't a format I've ever had
> to use, so I didn't think of it.
You
> "Vaclav" == Vaclav Smidl <[EMAIL PROTECTED]> writes:
Vaclav> (I had to change Author_Address to AuthorAddress. It does not
Vaclav> work with CopyStyle! lyx announce it does not know
Vaclav> Author_Address but 'Author Address' which does not work
Vaclav> eather. AuthorAddress is safe
87 matches
Mail list logo