Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some sketches.
As it was some days ago discussed on the list, I created a conversion
definition SVG-EPS defined as inkscape -E $$o $$i as wells as one for
SVG-EPS as
This is consistent for me across two XP Pro boxes and one XP Home box,
and IIRC has worked since LyX 1.3.6 at least.
Forget my remark, I'm with Sparc Solaris...
--
Jean-Pierre
To: lyx-users@lists.lyx.org
From: Georg Baum [EMAIL PROTECTED]
Subject: Re: Wrong conversion of SVG for LyX inline display?
Date: Wed, 12 Jul 2006 08:38:30 +0200
Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some
mail.k wrote:
I still get Abstract. Any tips??
Read the FAQ:
http://wiki.lyx.org/FAQ/Unsorted#renameEnv
Jürgen
Robert Neumann wrote:
hello,
is there a way to change the vertical space between the items of a list? I
tried to use an ERT with \setlength{\itemsep}{0ex plus0.2ex} but somehow it
does not work. I would like to change the topsep (distance to the
preceeding text) as well, I'm using lyx 1.34.
Curtis Osterhoudt wrote:
Ctrl-shift-left immediately crashes LyX (1.4.1, on a Debian machine) for
me... so does ctrl-shift-up. I get the
lyx: SIGSEGV signal caught [...] Sorry, you have found a bug in LyX.
message, too.
I cannot reproduce this either (neither the cases described in the other
On Wednesday 12 July 2006 08:45, Juergen Spitzmueller wrote:
I cannot reproduce this either (neither the cases described in the other
mails).
I have finally succeeded with 1.4.2svn
I have inserted two lines with one word and pressed enter to get a third
(empty) line.
While in the last
On Wednesday 12 July 2006 01:29, Steve Harris wrote:
Good day José,
Good day,
After reading your post, I tested again and this is
not fixed in 1.4.2. It isn't much of a bug.
After several trials I succeeded into reproducing the bug, even for
1.4.2.svn.
This is an example line.
{If
To: lyx-users@lists.lyx.org
From: Georg Baum [EMAIL PROTECTED]
Subject: Re: Wrong conversion of SVG for LyX inline display?
Date: Wed, 12 Jul 2006 08:38:30 +0200
Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
Jose' Matos wrote:
I have finally succeeded with 1.4.2svn
I have inserted two lines with one word and pressed enter to get a third
(empty) line.
While in the last empty line I pressed Ctrl-Shift-Left and... I got a
crash.
I see. Most certainly DEPM interferes here and we end up with an
Hello,
My name is Edward Taylor, and I want to propose you triangle (three way
linking) link exchange.
I can place your link on the one of the following home pages:
http://pharma.nieruchomosci.pl (PR=6)
http://rx.auto.pl (PR=5)
Page where you place my link must meet next requirements:
1.
Reinhard Mayr wrote:
The problem still persists even if I delete the SVG-PNG conversion. A
attached an SVG problem file.
I was wrong, LyX will use imagemagicks convert program in that case. You
need to set the SVG-PNG converter to a script that first exports to eps and
then converts that to
Juergen Spitzmueller wrote:
Attached is a patch that fixes the crash for me, but I'm not sure it
produces the behaviour we want (delete the empty paragraph, which is
inconsistent to what LFUN_LEFTSEL does in this case).
attached is the proper fix, IMO.
selHandle has to be used, because it
Thanks for the vote of confidence. I did read the FAQ. It says:
/However, if you are using babel (which you do most likely if you
write in a language other than English), this will not work. In this
case, you have to add to the preamble: /
/\AtBeginDocument{%
Also sprach mail.k:
But I am /not /using Babel (to my knowledge, the document is in
English) and I got the preamble right. So what's wrong? I appreciate
your help...
Did you actually try:
\AtBeginDocument{%
\addto\captionsenglish{%
\renewcommand{\abstractname}{In nuce}%
mail.k wrote:
But I am /not /using Babel (to my knowledge, the document is in
English) and I got the preamble right.
You may be using Babel anyway. I'm set up to write in English (true
English, i.e., the American version :-)) only, and I just created a new
document with a few words in it
met vriendelijke groet / kind regards,
Maarten Sanders
Hi all,
I got a bit further, I found a workaround. If I export the file twice in a row
the page numbering gets right. For some reason my document is too complex and
needs one more go before the index files are right. Should I report
The first set of commands does work, but the second doesn't -- thanks.
Perhaps you could explain it to me, since I was following the Latex
Companion and could not figure out what was wrong.
And perhaps the FAQ should be changed: not However, if you are using
babel, but if the standard
Eran Kaplinsky wrote:
The first set of commands does work, but the second doesn't -- thanks.
Perhaps you could explain it to me, since I was following the Latex
Companion and could not figure out what was wrong.
And perhaps the FAQ should be changed: not However, if you are using
babel, but
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
Am Mittwoch, 12. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
Well, I think there must be 2 steps of conversion - one for displaying
the
image in LyX and one for the DVI output. -- Is that right?
Yes.
When I use SVG as source format, which conversions take place for which
Ok, I think I got it (after a while *gg*)
I could also figure out why the images seemed to be cropped properly an
newer images were not: The first images were created with gnumeric which
adopts the canvas size -- and the newer images have a canvas of A4,
therefore the large area to
On Wednesday 12 July 2006 21:04, Jeremy Johnson wrote:
I have a fax cover sheet in .tex
which I'd like to convert to .lyx
I can't seem to get my headers/footers to
appear though. (For my footer all I get is
the numeral '1' centered).
In my preamble I have the following:
Hi!
I've installed LyX with the windows installer without problem and the
beamer presentation class appears in the menu. It seems however that
beamer.layout cannot be found. It can be found in the texmf
directories. How can I tell LyX where to find it? Where is the
.lyx/layouts directory on
Hi, i have a problem with instant preview: it simply claims that the
latex compilation failed, see below --- despite that I could compile
it manually. Does anybody know how to fix this?
Thanks,
-Jan
lyx document header finished
command
python
Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some sketches.
As it was some days ago discussed on the list, I created a conversion
definition SVG-EPS defined as inkscape -E $$o $$i as wells as one for
SVG-EPS as
This is consistent for me across two XP Pro boxes and one XP Home box,
and IIRC has worked since LyX 1.3.6 at least.
Forget my remark, I'm with Sparc Solaris...
--
Jean-Pierre
To: lyx-users@lists.lyx.org
From: Georg Baum [EMAIL PROTECTED]
Subject: Re: Wrong conversion of SVG for LyX inline display?
Date: Wed, 12 Jul 2006 08:38:30 +0200
Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
create some
mail.k wrote:
I still get Abstract. Any tips??
Read the FAQ:
http://wiki.lyx.org/FAQ/Unsorted#renameEnv
Jürgen
Robert Neumann wrote:
hello,
is there a way to change the vertical space between the items of a list? I
tried to use an ERT with \setlength{\itemsep}{0ex plus0.2ex} but somehow it
does not work. I would like to change the topsep (distance to the
preceeding text) as well, I'm using lyx 1.34.
Curtis Osterhoudt wrote:
Ctrl-shift-left immediately crashes LyX (1.4.1, on a Debian machine) for
me... so does ctrl-shift-up. I get the
lyx: SIGSEGV signal caught [...] Sorry, you have found a bug in LyX.
message, too.
I cannot reproduce this either (neither the cases described in the other
On Wednesday 12 July 2006 08:45, Juergen Spitzmueller wrote:
I cannot reproduce this either (neither the cases described in the other
mails).
I have finally succeeded with 1.4.2svn
I have inserted two lines with one word and pressed enter to get a third
(empty) line.
While in the last
On Wednesday 12 July 2006 01:29, Steve Harris wrote:
Good day José,
Good day,
After reading your post, I tested again and this is
not fixed in 1.4.2. It isn't much of a bug.
After several trials I succeeded into reproducing the bug, even for
1.4.2.svn.
This is an example line.
{If
To: lyx-users@lists.lyx.org
From: Georg Baum [EMAIL PROTECTED]
Subject: Re: Wrong conversion of SVG for LyX inline display?
Date: Wed, 12 Jul 2006 08:38:30 +0200
Reinhard Mayr aka Czerwinski wrote:
Hello,
I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
Jose' Matos wrote:
I have finally succeeded with 1.4.2svn
I have inserted two lines with one word and pressed enter to get a third
(empty) line.
While in the last empty line I pressed Ctrl-Shift-Left and... I got a
crash.
I see. Most certainly DEPM interferes here and we end up with an
Hello,
My name is Edward Taylor, and I want to propose you triangle (three way
linking) link exchange.
I can place your link on the one of the following home pages:
http://pharma.nieruchomosci.pl (PR=6)
http://rx.auto.pl (PR=5)
Page where you place my link must meet next requirements:
1.
Reinhard Mayr wrote:
The problem still persists even if I delete the SVG-PNG conversion. A
attached an SVG problem file.
I was wrong, LyX will use imagemagicks convert program in that case. You
need to set the SVG-PNG converter to a script that first exports to eps and
then converts that to
Juergen Spitzmueller wrote:
Attached is a patch that fixes the crash for me, but I'm not sure it
produces the behaviour we want (delete the empty paragraph, which is
inconsistent to what LFUN_LEFTSEL does in this case).
attached is the proper fix, IMO.
selHandle has to be used, because it
Thanks for the vote of confidence. I did read the FAQ. It says:
/However, if you are using babel (which you do most likely if you
write in a language other than English), this will not work. In this
case, you have to add to the preamble: /
/\AtBeginDocument{%
Also sprach mail.k:
But I am /not /using Babel (to my knowledge, the document is in
English) and I got the preamble right. So what's wrong? I appreciate
your help...
Did you actually try:
\AtBeginDocument{%
\addto\captionsenglish{%
\renewcommand{\abstractname}{In nuce}%
mail.k wrote:
But I am /not /using Babel (to my knowledge, the document is in
English) and I got the preamble right.
You may be using Babel anyway. I'm set up to write in English (true
English, i.e., the American version :-)) only, and I just created a new
document with a few words in it
met vriendelijke groet / kind regards,
Maarten Sanders
Hi all,
I got a bit further, I found a workaround. If I export the file twice in a row
the page numbering gets right. For some reason my document is too complex and
needs one more go before the index files are right. Should I report
The first set of commands does work, but the second doesn't -- thanks.
Perhaps you could explain it to me, since I was following the Latex
Companion and could not figure out what was wrong.
And perhaps the FAQ should be changed: not However, if you are using
babel, but if the standard
Eran Kaplinsky wrote:
The first set of commands does work, but the second doesn't -- thanks.
Perhaps you could explain it to me, since I was following the Latex
Companion and could not figure out what was wrong.
And perhaps the FAQ should be changed: not However, if you are using
babel, but
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
Am Mittwoch, 12. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
Well, I think there must be 2 steps of conversion - one for displaying
the
image in LyX and one for the DVI output. -- Is that right?
Yes.
When I use SVG as source format, which conversions take place for which
Ok, I think I got it (after a while *gg*)
I could also figure out why the images seemed to be cropped properly an
newer images were not: The first images were created with gnumeric which
adopts the canvas size -- and the newer images have a canvas of A4,
therefore the large area to
On Wednesday 12 July 2006 21:04, Jeremy Johnson wrote:
I have a fax cover sheet in .tex
which I'd like to convert to .lyx
I can't seem to get my headers/footers to
appear though. (For my footer all I get is
the numeral '1' centered).
In my preamble I have the following:
Hi!
I've installed LyX with the windows installer without problem and the
beamer presentation class appears in the menu. It seems however that
beamer.layout cannot be found. It can be found in the texmf
directories. How can I tell LyX where to find it? Where is the
.lyx/layouts directory on
Hi, i have a problem with instant preview: it simply claims that the
latex compilation failed, see below --- despite that I could compile
it manually. Does anybody know how to fix this?
Thanks,
-Jan
lyx document header finished
command
python
Reinhard Mayr aka Czerwinski wrote:
> Hello,
>
> I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape 0.43-20 to
> create some sketches.
>
> As it was some days ago discussed on the list, I created a conversion
> definition SVG->EPS defined as "inkscape -E $$o $$i" as wells as one for
>
>>
>>This is consistent for me across two XP Pro boxes and one XP Home box,
>>and IIRC has worked since LyX 1.3.6 at least.
Forget my remark, I'm with Sparc Solaris...
--
Jean-Pierre
>>To: lyx-users@lists.lyx.org
>>From: Georg Baum <[EMAIL PROTECTED]>
>>Subject: Re: Wrong conversion of SVG for LyX inline display?
>>Date: Wed, 12 Jul 2006 08:38:30 +0200
>>
>>Reinhard Mayr aka Czerwinski wrote:
>>
>>> Hello,
>>>
>>> I work with LyX 1.4.1 on OpenSuSE 10.1. And I use inkscape
mail.k wrote:
> I still get "Abstract". Any tips??
Read the FAQ:
http://wiki.lyx.org/FAQ/Unsorted#renameEnv
Jürgen
Robert Neumann wrote:
> hello,
> is there a way to change the vertical space between the items of a list? I
> tried to use an ERT with \setlength{\itemsep}{0ex plus0.2ex} but somehow it
> does not work. I would like to change the topsep (distance to the
> preceeding text) as well, I'm using lyx
Curtis Osterhoudt wrote:
> Ctrl-shift-left immediately crashes LyX (1.4.1, on a Debian machine) for
> me... so does ctrl-shift-up. I get the
> "lyx: SIGSEGV signal caught [...] Sorry, you have found a bug in LyX."
> message, too.
I cannot reproduce this either (neither the cases described in the
On Wednesday 12 July 2006 08:45, Juergen Spitzmueller wrote:
>
> I cannot reproduce this either (neither the cases described in the other
> mails).
I have finally succeeded with 1.4.2svn
I have inserted two lines with one word and pressed enter to get a third
(empty) line.
While in the
On Wednesday 12 July 2006 01:29, Steve Harris wrote:
>
> Good day José,
Good day,
> After reading your post, I tested again and this is
> not fixed in 1.4.2. It isn't much of a bug.
After several trials I succeeded into reproducing the bug, even for
1.4.2.svn.
> This is an example line.
>
>
> >>To: lyx-users@lists.lyx.org
> >>From: Georg Baum <[EMAIL PROTECTED]>
> >>Subject: Re: Wrong conversion of SVG for LyX inline display?
> >>Date: Wed, 12 Jul 2006 08:38:30 +0200
> >>
> >>Reinhard Mayr aka Czerwinski wrote:
> >>
> >>> Hello,
> >>>
> >>> I work with LyX 1.4.1 on OpenSuSE 10.1.
Jose' Matos wrote:
> I have finally succeeded with 1.4.2svn
>
> I have inserted two lines with one word and pressed enter to get a third
> (empty) line.
>
> While in the last empty line I pressed Ctrl-Shift-Left and... I got a
> crash.
I see. Most certainly DEPM interferes here and we end up
Hello,
My name is Edward Taylor, and I want to propose you triangle (three way
linking) link exchange.
I can place your link on the one of the following home pages:
http://pharma.nieruchomosci.pl (PR=6)
http://rx.auto.pl (PR=5)
Page where you place my link must meet next requirements:
1.
Reinhard Mayr wrote:
> The problem still persists even if I delete the SVG->PNG conversion. A
> attached an SVG problem file.
I was wrong, LyX will use imagemagicks convert program in that case. You
need to set the SVG-PNG converter to a script that first exports to eps and
then converts that to
Juergen Spitzmueller wrote:
> Attached is a patch that fixes the crash for me, but I'm not sure it
> produces the behaviour we want (delete the empty paragraph, which is
> inconsistent to what LFUN_LEFTSEL does in this case).
attached is the proper fix, IMO.
selHandle has to be used, because it
Thanks for the vote of confidence. I did read the FAQ. It says:
/However, if you are using babel (which you do most likely if you
write in a language other than English), this will not work. In this
case, you have to add to the preamble: /
/\AtBeginDocument{%
Also sprach mail.k:
> But I am /not /using Babel (to my knowledge, the document is in
> "English") and I got the preamble right. So what's wrong? I appreciate
> your help...
Did you actually try:
\AtBeginDocument{%
\addto\captionsenglish{%
\renewcommand{\abstractname}{In
mail.k wrote:
But I am /not /using Babel (to my knowledge, the document is in
"English") and I got the preamble right.
You may be using Babel anyway. I'm set up to write in English (true
English, i.e., the American version :-)) only, and I just created a new
document with a few words in
met vriendelijke groet / kind regards,
Maarten Sanders
Hi all,
I got a bit further, I found a workaround. If I export the file twice in a row
the page numbering gets right. For some reason my document is too complex and
needs one more go before the index files are right. Should I report
The first set of commands does work, but the second doesn't -- thanks.
Perhaps you could explain it to me, since I was following the Latex
Companion and could not figure out what was wrong.
And perhaps the FAQ should be changed: not "However, if you are using
babel", but "if the standard
Eran Kaplinsky wrote:
> The first set of commands does work, but the second doesn't -- thanks.
> Perhaps you could explain it to me, since I was following the Latex
> Companion and could not figure out what was wrong.
>
> And perhaps the FAQ should be changed: not "However, if you are using
>
Well, I think there must be 2 steps of conversion - one for displaying the
image in LyX and one for the DVI output. -- Is that right?
When I use SVG as source format, which conversions take place for which
situation?
What is the preferred format for LyX and for DVI output?
I thought (might
Am Mittwoch, 12. Juli 2006 19:14 schrieb Reinhard Mayr aka Czerwinski:
> Well, I think there must be 2 steps of conversion - one for displaying
the
> image in LyX and one for the DVI output. -- Is that right?
Yes.
> When I use SVG as source format, which conversions take place for which
>
Ok, I think I got it (after a while *gg*)
I could also figure out why the images seemed to be cropped properly an
newer images were not: The first images were created with gnumeric which
adopts the canvas size -- and the newer images have a canvas of A4,
therefore the large area to
On Wednesday 12 July 2006 21:04, Jeremy Johnson wrote:
> I have a fax cover sheet in .tex
> which I'd like to convert to .lyx
>
> I can't seem to get my headers/footers to
> appear though. (For my footer all I get is
> the numeral '1' centered).
>
>
> In my preamble I have the following:
>
>
Hi!
I've installed LyX with the windows installer without problem and the
beamer presentation class appears in the menu. It seems however that
beamer.layout cannot be found. It can be found in the texmf
directories. How can I tell LyX where to find it? Where is the
.lyx/layouts directory on
Hi, i have a problem with instant preview: it simply claims that the
latex compilation failed, see below --- despite that I could compile
it manually. Does anybody know how to fix this?
Thanks,
-Jan
lyx document header finished
python
75 matches
Mail list logo
