On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
Darren I'm not talking about a functional change, I'm talking about a
Darren user interface change back to past behaviour that was probably
Darren once considered correct.
This was _not_ past behaviour.
An excerpt of a message
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
Darren I'm not talking about a functional change, I'm talking about a
Darren user interface change back to past behaviour that was probably
Darren once considered correct.
Hi,
I hope I'm not sounding pushy but isn't rc2 overdue?
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn may induce some
Sven Schreiber wrote:
Hi,
I hope I'm not sounding pushy but isn't rc2 overdue?
1.5.0 is _long_ overdue...
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are
Oliver Horvath wrote:
Hallo,
I have a problem with hyphenation.
I tried to define the words at the preamble:
\hyphenation{
Ar-chi-tek-tur
Bit-feh-ler-wahr-schein-lich-keit
DHCP
Dienst-güte
Direct-SequenceSpread-Spectrum
Do-mä-ne
Down-stream
ge-star-tet
ge-trig-gert
Hand-over
Lay-er
Darren Freeman wrote:
On Mon, 2007-06-25 at 13:06 +0200, Helge Hafting wrote:
Darren Freeman wrote:
It feels more natural to have all my key-presses honoured on the screen.
When certain keys are sometimes disabled, it just doesn't feel right.
There are lots of limitations
On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
I happen to have LyX 1.3.3 installed on this machine and it does not
exhibit the behavior you describe. Actually, I think the current one
was already built-in since the first releases of LyX. As someone who
has been around since
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
I happen to have LyX 1.3.3 installed on this machine and it does
not exhibit the behavior you describe. Actually, I think the
current one was already built-in since the
On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember that
at that time, the whole unpacked source was 700k (now: 55M), and there
was only one documentation file :)
Also only one developer, minimum inline documentation,
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember
that at that time, the whole unpacked source was 700k (now: 55M),
and there was only one documentation file
Jean-Marc Lasgouttes wrote:
Darren == Darren Freeman [EMAIL PROTECTED] writes:
And you can't erase past the beginning of the document,
Darren Now you're being silly. You can't do that in ordinary text
Darren editors either.
But LyX is no ordinary text editor.
Darren I'm not talking
Todd == Todd Denniston [EMAIL PROTECTED] writes:
Todd Was not the original behavior, to always pop a gentle nudge
Todd reminder in the bar at the bottom of the window indicating
Todd something along the lines two spaces don't make sense here.?
Todd The current revs [at least since 1.4.3] only
Abdelrazak Younes schrieb:
Sven Schreiber wrote:
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn may induce some
Hello everyone,
newly I have a problem with my Lyx-Installation (1.5 rc1) and Bibtex
(MikTex 2.6) under Windows XP SP 2 which worked finde until today: If I
try to convert a lyx file with some bibliographic entries into pdf/dvi
always occurs the error: ... verweist auf den Speicher in ...
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From the Latex Companion and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text. Works perfectly. But I
Darren Freeman wrote:
On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember that
at that time, the whole unpacked source was 700k (now: 55M), and there
was only one documentation file :)
Also only one developer,
Sven Schreiber wrote:
Abdelrazak Younes schrieb:
Sven Schreiber wrote:
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn
Robert Neumann wrote:
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From the Latex Companion and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text.
Hello,
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Thank You!
Lucas Amorim
On Tue, 26 Jun 2007, Lucas Amorim wrote:
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Just choose:
Document - Settings
Document
Hi everyone,
I have a problem installing the Windows version of Lyx in my computer. I
tried both the LyxWinInstaller and the lyx-144-5.exe installer, and in
both cases I get the following problem. Once I install all the
components such as MikTex, Gsview, etc., there is a black window that
Hi all,
this is most likely a LaTeX issue but since I don't know what to do
about it I thought I'd ask.
Create a document of the Article(Elsevier) class (elsart.cls). Add an
Author environment. Type a list of names.
When I generate a PDF I see the author list continue off the right edge
of the
Hi all,
is there a right way to handle article numbers in BibTeX? Such as with
journals like Applied Physics Letters where you don't refer to page
numbers, but article numbers instead. Just use pages=xxx like with
page numbers?
Have fun,
Darren
On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
Darren I'm not talking about a functional change, I'm talking about a
Darren user interface change back to past behaviour that was probably
Darren once considered correct.
This was _not_ past behaviour.
An excerpt of a message
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
Darren I'm not talking about a functional change, I'm talking about a
Darren user interface change back to past behaviour that was probably
Darren once considered correct.
Hi,
I hope I'm not sounding pushy but isn't rc2 overdue?
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn may induce some
Sven Schreiber wrote:
Hi,
I hope I'm not sounding pushy but isn't rc2 overdue?
1.5.0 is _long_ overdue...
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are
Oliver Horvath wrote:
Hallo,
I have a problem with hyphenation.
I tried to define the words at the preamble:
\hyphenation{
Ar-chi-tek-tur
Bit-feh-ler-wahr-schein-lich-keit
DHCP
Dienst-güte
Direct-SequenceSpread-Spectrum
Do-mä-ne
Down-stream
ge-star-tet
ge-trig-gert
Hand-over
Lay-er
Darren Freeman wrote:
On Mon, 2007-06-25 at 13:06 +0200, Helge Hafting wrote:
Darren Freeman wrote:
It feels more natural to have all my key-presses honoured on the screen.
When certain keys are sometimes disabled, it just doesn't feel right.
There are lots of limitations
On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
I happen to have LyX 1.3.3 installed on this machine and it does not
exhibit the behavior you describe. Actually, I think the current one
was already built-in since the first releases of LyX. As someone who
has been around since
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
I happen to have LyX 1.3.3 installed on this machine and it does
not exhibit the behavior you describe. Actually, I think the
current one was already built-in since the
On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember that
at that time, the whole unpacked source was 700k (now: 55M), and there
was only one documentation file :)
Also only one developer, minimum inline documentation,
Darren == Darren Freeman [EMAIL PROTECTED] writes:
Darren On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember
that at that time, the whole unpacked source was 700k (now: 55M),
and there was only one documentation file
Jean-Marc Lasgouttes wrote:
Darren == Darren Freeman [EMAIL PROTECTED] writes:
And you can't erase past the beginning of the document,
Darren Now you're being silly. You can't do that in ordinary text
Darren editors either.
But LyX is no ordinary text editor.
Darren I'm not talking
Todd == Todd Denniston [EMAIL PROTECTED] writes:
Todd Was not the original behavior, to always pop a gentle nudge
Todd reminder in the bar at the bottom of the window indicating
Todd something along the lines two spaces don't make sense here.?
Todd The current revs [at least since 1.4.3] only
Abdelrazak Younes schrieb:
Sven Schreiber wrote:
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn may induce some
Hello everyone,
newly I have a problem with my Lyx-Installation (1.5 rc1) and Bibtex
(MikTex 2.6) under Windows XP SP 2 which worked finde until today: If I
try to convert a lyx file with some bibliographic entries into pdf/dvi
always occurs the error: ... verweist auf den Speicher in ...
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From the Latex Companion and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text. Works perfectly. But I
Darren Freeman wrote:
On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
would find something there, it was a funny thing to do. Remember that
at that time, the whole unpacked source was 700k (now: 55M), and there
was only one documentation file :)
Also only one developer,
Sven Schreiber wrote:
Abdelrazak Younes schrieb:
Sven Schreiber wrote:
IMHO it would be more efficient to test the current status instead of
stumbling over fixedintrunk bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn
Robert Neumann wrote:
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From the Latex Companion and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text.
Hello,
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Thank You!
Lucas Amorim
On Tue, 26 Jun 2007, Lucas Amorim wrote:
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Just choose:
Document - Settings
Document
Hi everyone,
I have a problem installing the Windows version of Lyx in my computer. I
tried both the LyxWinInstaller and the lyx-144-5.exe installer, and in
both cases I get the following problem. Once I install all the
components such as MikTex, Gsview, etc., there is a black window that
Hi all,
this is most likely a LaTeX issue but since I don't know what to do
about it I thought I'd ask.
Create a document of the Article(Elsevier) class (elsart.cls). Add an
Author environment. Type a list of names.
When I generate a PDF I see the author list continue off the right edge
of the
Hi all,
is there a right way to handle article numbers in BibTeX? Such as with
journals like Applied Physics Letters where you don't refer to page
numbers, but article numbers instead. Just use pages=xxx like with
page numbers?
Have fun,
Darren
On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
> Darren> I'm not talking about a functional change, I'm talking about a
> Darren> user interface change back to past behaviour that was probably
> Darren> once considered "correct".
>
> This was _not_ past behaviour.
An excerpt of a
> "Darren" == Darren Freeman <[EMAIL PROTECTED]> writes:
Darren> On Tue, 2007-06-26 at 07:43 +0200, Jean-Marc Lasgouttes wrote:
Darren> I'm not talking about a functional change, I'm talking about a
Darren> user interface change back to past behaviour that was probably
Darren> once considered
Hi,
I hope I'm not sounding "pushy" but isn't rc2 overdue?
IMHO it would be more efficient to test the current status instead of
stumbling over "fixedintrunk" bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in turn may induce
Sven Schreiber wrote:
Hi,
I hope I'm not sounding "pushy" but isn't rc2 overdue?
1.5.0 is _long_ overdue...
IMHO it would be more efficient to test the current status instead of
stumbling over "fixedintrunk" bugs again and again. Currently it seems
to me that many known and/or fixed bugs
Oliver Horvath wrote:
Hallo,
I have a problem with hyphenation.
I tried to define the words at the preamble:
\hyphenation{
Ar-chi-tek-tur
Bit-feh-ler-wahr-schein-lich-keit
DHCP
Dienst-güte
Direct-SequenceSpread-Spectrum
Do-mä-ne
Down-stream
ge-star-tet
ge-trig-gert
Hand-over
Lay-er
Darren Freeman wrote:
On Mon, 2007-06-25 at 13:06 +0200, Helge Hafting wrote:
Darren Freeman wrote:
It feels more natural to have all my key-presses honoured on the screen.
When certain keys are sometimes disabled, it just doesn't feel right.
There are lots of limitations
On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
> I happen to have LyX 1.3.3 installed on this machine and it does not
> exhibit the behavior you describe. Actually, I think the current one
> was already built-in since the first releases of LyX. As someone who
> has been around
> "Darren" == Darren Freeman <[EMAIL PROTECTED]> writes:
Darren> On Tue, 2007-06-26 at 10:00 +0200, Jean-Marc Lasgouttes wrote:
>> I happen to have LyX 1.3.3 installed on this machine and it does
>> not exhibit the behavior you describe. Actually, I think the
>> current one was already
On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
> would find something there, it was a funny thing to do. Remember that
> at that time, the whole unpacked source was 700k (now: 55M), and there
> was only one documentation file :)
Also only one developer, minimum inline
> "Darren" == Darren Freeman <[EMAIL PROTECTED]> writes:
Darren> On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
>> would find something there, it was a funny thing to do. Remember
>> that at that time, the whole unpacked source was 700k (now: 55M),
>> and there was only one
Jean-Marc Lasgouttes wrote:
"Darren" == Darren Freeman <[EMAIL PROTECTED]> writes:
And you can't erase past the beginning of the document,
Darren> Now you're being silly. You can't do that in ordinary text
Darren> editors either.
But LyX is no ordinary text editor.
Darren> I'm not
> "Todd" == Todd Denniston <[EMAIL PROTECTED]> writes:
Todd> Was not the original behavior, to always pop a gentle nudge
Todd> reminder in the bar at the bottom of the window indicating
Todd> something along the lines "two spaces don't make sense here."?
Todd> The current revs [at least
Abdelrazak Younes schrieb:
> Sven Schreiber wrote:
>> IMHO it would be more efficient to test the current status instead of
>> stumbling over "fixedintrunk" bugs again and again. Currently it seems
>> to me that many known and/or fixed bugs are reported again and again,
>> which in turn may induce
Hello everyone,
newly I have a problem with my Lyx-Installation (1.5 rc1) and Bibtex
(MikTex 2.6) under Windows XP SP 2 which worked finde until today: If I
try to convert a lyx file with some bibliographic entries into pdf/dvi
always occurs the error: "... verweist auf den Speicher in ...
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From "the Latex Companion" and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text. Works perfectly. But I
Darren Freeman wrote:
> On Tue, 2007-06-26 at 12:47 +0200, Jean-Marc Lasgouttes wrote:
>> would find something there, it was a funny thing to do. Remember that
>> at that time, the whole unpacked source was 700k (now: 55M), and there
>> was only one documentation file :)
>
> Also only one
Sven Schreiber wrote:
Abdelrazak Younes schrieb:
Sven Schreiber wrote:
IMHO it would be more efficient to test the current status instead of
stumbling over "fixedintrunk" bugs again and again. Currently it seems
to me that many known and/or fixed bugs are reported again and again,
which in
Robert Neumann wrote:
hello,
I have some AMS align environments and I would like to change the space above
and below these equations. From "the Latex Companion" and an older thread I
know, that this is difficult to change the settings. So I just added
\vspace*{-2mm} above at the end of the text.
Hello,
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Thank You!
Lucas Amorim
On Tue, 26 Jun 2007, Lucas Amorim wrote:
> What would be a good latex class for writing books and how do I add it
> to lyx? I was trying to use the scrbook class provided by the
> koma-scripts package on debian, bt there is no scrbook.lyx template...
Just choose:
Document -> Settings
Document
Hi everyone,
I have a problem installing the Windows version of Lyx in my computer. I
tried both the LyxWinInstaller and the lyx-144-5.exe installer, and in
both cases I get the following problem. Once I install all the
components such as MikTex, Gsview, etc., there is a black window that
Hi all,
this is most likely a LaTeX issue but since I don't know what to do
about it I thought I'd ask.
Create a document of the Article(Elsevier) class (elsart.cls). Add an
Author environment. Type a list of names.
When I generate a PDF I see the author list continue off the right edge
of the
Hi all,
is there a "right" way to handle article numbers in BibTeX? Such as with
journals like Applied Physics Letters where you don't refer to page
numbers, but article numbers instead. Just use pages="xxx" like with
page numbers?
Have fun,
Darren
69 matches
Mail list logo