I can insert my code listing as a float in 2 ways, it appears.
I can insert an algorithm float, then insert a program listing into it. This
results in a caption 'Algorithm ...'
Else, I can insert a program listing, enter the settings dialog, and select
float. I can then add a caption, and it
Hi Again,
I totally agreed aspell is better than hunspell. Especially if you working
with some small language.
I found following note from wiki:
*Note:* Beginning with 2.0 support for the aspell command line program has
been dropped. Although the aspell library (aspell 0.60.x) is still
Dear all. I need, for a complex legal format used in Venezuela, to have
different top margins for odd and even pages. I have been googling around
but only the obvious inner/outer margin answer appears. Is there any way to
handle this through LyX/LaTeX?
Thanks in advance. Best regards.
Am 07.03.2012 um 15:50 schrieb Indrek Tuula:
Hi Again,
I totally agreed aspell is better than hunspell. Especially if you working
with some small language.
Why is aspell better than hunspell?
And what is a small language? :)
I found following note from wiki:
Note: Beginning with 2.0
On 03/07/2012 09:50 AM, Indrek Tuula wrote:
Hi Again,
So far i resolve almost my open issues excepted how to make TOC look
like totally bold because by default subsections and subsubsections
are not a bold.
You want to explain this one again?
Richard
On 03/07/2012 10:31 AM, Julio Rojas wrote:
Dear all. I need, for a complex legal format used in Venezuela, to
have different top margins for odd and even pages. I have been
googling around but only the obvious inner/outer margin answer
appears. Is there any way to handle this through
On 03/07/2012 10:37 AM, Uwe Jugel wrote:
Hi,
I want to configure a lyx layout for this documentclass syntax:
\documentclass[english]{lni}
What is right \DeclareLaTeXClass syntax for this?
Just: \DeclareLaTeXClass{lni}.
If you want to force english, then add this to the layout file as:
On 03/04/2012 12:22 AM, William Seager wrote:
Hi all. This is more a latex problem than a lyx problem, but since
I'm using lyx I thought I'd ask here.
I have a complex document in which the table of contents
spans several pages.
My problem is that in the header the name of the table of
Hi Again,
Please see attached picture. It represent standard outlook of table of
content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and sub-subsections) areas
also in bold font.
As end result I would achieve table of content format as
On Wednesday 07 March 2012 15:55:44 Richard Heck wrote:
What document class is this? What page style are you using? Do you want
to change how this looks only in the TOC, or in the rest of the document
as well?
Sorry for the confusion about this but the solution was posted out
of thread; here
On 24/02/2012 5:30 PM, Pascal Fischer wrote:
2. Does the bundle-installer that includes all additional software
that is needed, install all programs or does it only include these
programs but I have to install each of them seperately?
It installs them one after the other if I remember
On 3/5/2012 2:01 AM, Rainer M Krug wrote:
Actualy one more question - it might have been mentioned, but are you
also looking into a lyx2word converter which would provide
round-trips with track changes and notes?
I'd really like to provide for that, yes. However, there is something of
a
Thanks a lot! I have never believed that it would be so difficult to do.
-
Julio Rojas
jcredbe...@gmail.com
On Wed, Mar 7, 2012 at 9:32 PM, Richard Heck rgh...@comcast.net wrote:
On 03/07/2012 10:31 AM, Julio Rojas wrote:
Dear all. I need, for
On 03/07/2012 04:56 PM, Julio Rojas wrote:
Thanks a lot! I have never believed that it would be so difficult to do.
The problem here is that you can't use \thepage for this, because of
details of LaTeX's page construction algorithm. The perpage package does
provide facilities that allow you
On Wed, Mar 7, 2012 at 4:29 PM, Hauke hauke_st...@gmx.de wrote:
Hey everyone,
i am new in lyx and use it currently for writing my thesis. i start using
lyx to avoid problems you may get writing long documents in word. first
impression and the sense behind it (i am not used to LateX) were
Dear Users and Developers,
First off, thank you to everyone who sent me documents over the weekend.
I was able to make a lot of tweaks to word2lyx based on what you sent me.
With that hurdle out of the way, I think it's ready to release it into
the wild. If you'd like to download a copy of it,
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Louise
From: Richard Heck [rgh...@comcast.net]
Sent: Thursday, 8 March 2012 7:08 AM
To: Louise Wilkinson
Subject: Re: Header line
On 03/06/2012 11:14 PM, Louise Wilkinson wrote:
On 03/07/2012 05:38 PM, stefano franchi wrote:
On Wed, Mar 7, 2012 at 4:29 PM, Hauke hauke_st...@gmx.de
mailto:hauke_st...@gmx.de wrote:
Hey everyone,
i am new in lyx and use it currently for writing my thesis. i
start using lyx to avoid problems you may get writing long
On 03/07/2012 07:33 PM, Louise Wilkinson wrote:
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Then the solution depends a bit upon which document class you are using.
The generic solution would be to use the titlesec package, which allows
you to redefine how
On 03/07/2012 04:01 PM, Indrek Tuula wrote:
Hi Again,
Please see attached picture. It represent standard outlook of table
of content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and
sub-subsections) areas also in bold font.
As end
On 03/07/2012 05:29 PM, Hauke wrote:
Hey everyone,
as you can see in the attached screenshots, the headline of the
subsection 2.2 is taking too much space on the page in the pdf (dvi or
how its called). and i absolutely dont know why.
This is a TeX issue, since it can't decide where to
Thanks a lot Rob!
If I have understood correctly, this script cannot import equations. Do you it
is possible to translate these objects to Latex too ?
Regards,
Murat
--
Murat Yildizoglu
yi...@u-bordeaux4.fr
Le 8 mars 2012 à 01:03, Rob Oakes rob.oa...@oak-tree.us a écrit :
Dear Users and
I can insert my code listing as a float in 2 ways, it appears.
I can insert an algorithm float, then insert a program listing into it. This
results in a caption 'Algorithm ...'
Else, I can insert a program listing, enter the settings dialog, and select
float. I can then add a caption, and it
Hi Again,
I totally agreed aspell is better than hunspell. Especially if you working
with some small language.
I found following note from wiki:
*Note:* Beginning with 2.0 support for the aspell command line program has
been dropped. Although the aspell library (aspell 0.60.x) is still
Dear all. I need, for a complex legal format used in Venezuela, to have
different top margins for odd and even pages. I have been googling around
but only the obvious inner/outer margin answer appears. Is there any way to
handle this through LyX/LaTeX?
Thanks in advance. Best regards.
Am 07.03.2012 um 15:50 schrieb Indrek Tuula:
Hi Again,
I totally agreed aspell is better than hunspell. Especially if you working
with some small language.
Why is aspell better than hunspell?
And what is a small language? :)
I found following note from wiki:
Note: Beginning with 2.0
On 03/07/2012 09:50 AM, Indrek Tuula wrote:
Hi Again,
So far i resolve almost my open issues excepted how to make TOC look
like totally bold because by default subsections and subsubsections
are not a bold.
You want to explain this one again?
Richard
On 03/07/2012 10:31 AM, Julio Rojas wrote:
Dear all. I need, for a complex legal format used in Venezuela, to
have different top margins for odd and even pages. I have been
googling around but only the obvious inner/outer margin answer
appears. Is there any way to handle this through
On 03/07/2012 10:37 AM, Uwe Jugel wrote:
Hi,
I want to configure a lyx layout for this documentclass syntax:
\documentclass[english]{lni}
What is right \DeclareLaTeXClass syntax for this?
Just: \DeclareLaTeXClass{lni}.
If you want to force english, then add this to the layout file as:
On 03/04/2012 12:22 AM, William Seager wrote:
Hi all. This is more a latex problem than a lyx problem, but since
I'm using lyx I thought I'd ask here.
I have a complex document in which the table of contents
spans several pages.
My problem is that in the header the name of the table of
Hi Again,
Please see attached picture. It represent standard outlook of table of
content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and sub-subsections) areas
also in bold font.
As end result I would achieve table of content format as
On Wednesday 07 March 2012 15:55:44 Richard Heck wrote:
What document class is this? What page style are you using? Do you want
to change how this looks only in the TOC, or in the rest of the document
as well?
Sorry for the confusion about this but the solution was posted out
of thread; here
On 24/02/2012 5:30 PM, Pascal Fischer wrote:
2. Does the bundle-installer that includes all additional software
that is needed, install all programs or does it only include these
programs but I have to install each of them seperately?
It installs them one after the other if I remember
On 3/5/2012 2:01 AM, Rainer M Krug wrote:
Actualy one more question - it might have been mentioned, but are you
also looking into a lyx2word converter which would provide
round-trips with track changes and notes?
I'd really like to provide for that, yes. However, there is something of
a
Thanks a lot! I have never believed that it would be so difficult to do.
-
Julio Rojas
jcredbe...@gmail.com
On Wed, Mar 7, 2012 at 9:32 PM, Richard Heck rgh...@comcast.net wrote:
On 03/07/2012 10:31 AM, Julio Rojas wrote:
Dear all. I need, for
On 03/07/2012 04:56 PM, Julio Rojas wrote:
Thanks a lot! I have never believed that it would be so difficult to do.
The problem here is that you can't use \thepage for this, because of
details of LaTeX's page construction algorithm. The perpage package does
provide facilities that allow you
On Wed, Mar 7, 2012 at 4:29 PM, Hauke hauke_st...@gmx.de wrote:
Hey everyone,
i am new in lyx and use it currently for writing my thesis. i start using
lyx to avoid problems you may get writing long documents in word. first
impression and the sense behind it (i am not used to LateX) were
Dear Users and Developers,
First off, thank you to everyone who sent me documents over the weekend.
I was able to make a lot of tweaks to word2lyx based on what you sent me.
With that hurdle out of the way, I think it's ready to release it into
the wild. If you'd like to download a copy of it,
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Louise
From: Richard Heck [rgh...@comcast.net]
Sent: Thursday, 8 March 2012 7:08 AM
To: Louise Wilkinson
Subject: Re: Header line
On 03/06/2012 11:14 PM, Louise Wilkinson wrote:
On 03/07/2012 05:38 PM, stefano franchi wrote:
On Wed, Mar 7, 2012 at 4:29 PM, Hauke hauke_st...@gmx.de
mailto:hauke_st...@gmx.de wrote:
Hey everyone,
i am new in lyx and use it currently for writing my thesis. i
start using lyx to avoid problems you may get writing long
On 03/07/2012 07:33 PM, Louise Wilkinson wrote:
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Then the solution depends a bit upon which document class you are using.
The generic solution would be to use the titlesec package, which allows
you to redefine how
On 03/07/2012 04:01 PM, Indrek Tuula wrote:
Hi Again,
Please see attached picture. It represent standard outlook of table
of content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and
sub-subsections) areas also in bold font.
As end
On 03/07/2012 05:29 PM, Hauke wrote:
Hey everyone,
as you can see in the attached screenshots, the headline of the
subsection 2.2 is taking too much space on the page in the pdf (dvi or
how its called). and i absolutely dont know why.
This is a TeX issue, since it can't decide where to
Thanks a lot Rob!
If I have understood correctly, this script cannot import equations. Do you it
is possible to translate these objects to Latex too ?
Regards,
Murat
--
Murat Yildizoglu
yi...@u-bordeaux4.fr
Le 8 mars 2012 à 01:03, Rob Oakes rob.oa...@oak-tree.us a écrit :
Dear Users and
I can insert my code listing as a float in 2 ways, it appears.
I can insert an algorithm float, then insert a program listing into it. This
results in a caption 'Algorithm ...'
Else, I can insert a program listing, enter the settings dialog, and select
float. I can then add a caption, and it
Hi Again,
I totally agreed aspell is better than hunspell. Especially if you working
with some small language.
I found following note from wiki:
*Note:* Beginning with 2.0 support for the aspell command line program has
been dropped. Although the aspell library (aspell 0.60.x) is still
Dear all. I need, for a complex legal format used in Venezuela, to have
different top margins for odd and even pages. I have been googling around
but only the obvious inner/outer margin answer appears. Is there any way to
handle this through LyX/LaTeX?
Thanks in advance. Best regards.
Am 07.03.2012 um 15:50 schrieb Indrek Tuula:
> Hi Again,
>
> I totally agreed aspell is better than hunspell. Especially if you working
> with some small language.
Why is aspell better than hunspell?
And what is a small language? :)
>
> I found following note from wiki:
>
> Note: Beginning
On 03/07/2012 09:50 AM, Indrek Tuula wrote:
Hi Again,
So far i resolve almost my open issues excepted how to make TOC look
like totally bold because by default subsections and subsubsections
are not a bold.
You want to explain this one again?
Richard
On 03/07/2012 10:31 AM, Julio Rojas wrote:
Dear all. I need, for a complex legal format used in Venezuela, to
have different top margins for odd and even pages. I have been
googling around but only the obvious inner/outer margin answer
appears. Is there any way to handle this through
On 03/07/2012 10:37 AM, Uwe Jugel wrote:
Hi,
I want to configure a lyx layout for this documentclass syntax:
\documentclass[english]{lni}
What is right \DeclareLaTeXClass syntax for this?
Just: \DeclareLaTeXClass{lni}.
If you want to force english, then add this to the layout file as:
On 03/04/2012 12:22 AM, William Seager wrote:
Hi all. This is more a latex problem than a lyx problem, but since
I'm using lyx I thought I'd ask here.
I have a complex document in which the table of contents
spans several pages.
My problem is that in the header the name of the table of
Hi Again,
Please see attached picture. It represent standard outlook of table of
content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and sub-subsections) areas
also in bold font.
As end result I would achieve table of content format as
On Wednesday 07 March 2012 15:55:44 Richard Heck wrote:
> What document class is this? What page style are you using? Do you want
> to change how this looks only in the TOC, or in the rest of the document
> as well?
Sorry for the confusion about this but the solution was posted out
of thread;
On 24/02/2012 5:30 PM, Pascal Fischer wrote:
2. Does the bundle-installer that includes all additional software
that is needed, install all programs or does it only include these
programs but I have to install each of them seperately?
It installs them one after the other if I remember
On 3/5/2012 2:01 AM, Rainer M Krug wrote:
> Actualy one more question - it might have been mentioned, but are you
> also looking into a lyx2word converter which would provide
> round-trips with track changes and notes?
I'd really like to provide for that, yes. However, there is something of
a
Thanks a lot! I have never believed that it would be so difficult to do.
-
Julio Rojas
jcredbe...@gmail.com
On Wed, Mar 7, 2012 at 9:32 PM, Richard Heck wrote:
> On 03/07/2012 10:31 AM, Julio Rojas wrote:
>
>> Dear all. I
On 03/07/2012 04:56 PM, Julio Rojas wrote:
Thanks a lot! I have never believed that it would be so difficult to do.
The problem here is that you can't use \thepage for this, because of
details of LaTeX's page construction algorithm. The perpage package does
provide facilities that allow you
On Wed, Mar 7, 2012 at 4:29 PM, Hauke wrote:
> Hey everyone,
>
> i am new in lyx and use it currently for writing my thesis. i start using
> lyx to avoid problems you may get writing long documents in word. first
> impression and the sense behind it (i am not used to LateX)
Dear Users and Developers,
First off, thank you to everyone who sent me documents over the weekend.
I was able to make a lot of tweaks to word2lyx based on what you sent me.
With that hurdle out of the way, I think it's ready to release it into
the wild. If you'd like to download a copy of it,
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Louise
From: Richard Heck [rgh...@comcast.net]
Sent: Thursday, 8 March 2012 7:08 AM
To: Louise Wilkinson
Subject: Re: Header line
On 03/06/2012 11:14 PM, Louise Wilkinson wrote:
On 03/07/2012 05:38 PM, stefano franchi wrote:
On Wed, Mar 7, 2012 at 4:29 PM, Hauke > wrote:
Hey everyone,
i am new in lyx and use it currently for writing my thesis. i
start using lyx to avoid problems you may get writing long
On 03/07/2012 07:33 PM, Louise Wilkinson wrote:
Hii,
Yes, that is what I want, a horizontal line underneath the chapter title.
Then the solution depends a bit upon which document class you are using.
The generic solution would be to use the titlesec package, which allows
you to redefine how
On 03/07/2012 04:01 PM, Indrek Tuula wrote:
Hi Again,
Please see attached picture. It represent standard outlook of table
of content with highlighted subsection and sub-subsections areas.
I would like to format highlighted (subsections and
sub-subsections) areas also in bold font.
As end
On 03/07/2012 05:29 PM, Hauke wrote:
Hey everyone,
as you can see in the attached screenshots, the headline of the
subsection 2.2 is taking too much space on the page in the pdf (dvi or
how its called). and i absolutely dont know why.
This is a TeX issue, since it can't decide where to
Thanks a lot Rob!
If I have understood correctly, this script cannot import equations. Do you it
is possible to translate these objects to Latex too ?
Regards,
Murat
--
Murat Yildizoglu
yi...@u-bordeaux4.fr
Le 8 mars 2012 à 01:03, Rob Oakes a écrit :
> Dear Users and
66 matches
Mail list logo