Am Fri, 05 Dec 2008 09:51:44 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
This time I have already invested in a AGP graphics card
for my system and it paid off. The lag is gone and I can use LyX 1.6
very smoothly again.
FYI, I
Am Fri, 05 Dec 2008 14:03:18 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
Integrated mainboard 865G chipset with Pentium IV 2.8 GHZ and 1024
RAM.
And did you enable the 3D desktop effects?
JMarc
No - I do not have compiz installed
Am Fri, 05 Dec 2008 09:51:44 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
This time I have already invested in a AGP graphics card
for my system and it paid off. The lag is gone and I can use LyX 1.6
very smoothly again.
FYI, I
Am Fri, 05 Dec 2008 14:03:18 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
Integrated mainboard 865G chipset with Pentium IV 2.8 GHZ and 1024
RAM.
And did you enable the 3D desktop effects?
JMarc
No - I do not have compiz installed
Am Fri, 05 Dec 2008 09:51:44 +0100
schrieb Jean-Marc Lasgouttes <[EMAIL PROTECTED]>:
> "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> writes:
> > This time I have already invested in a AGP graphics card
> > for my system and it paid off. The lag is gone and I ca
Am Fri, 05 Dec 2008 14:03:18 +0100
schrieb Jean-Marc Lasgouttes <[EMAIL PROTECTED]>:
> "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> writes:
> > Integrated mainboard 865G chipset with Pentium IV 2.8 GHZ and 1024
> > RAM.
>
> And did you enable the 3D desk
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly
Am Thu, 04 Dec 2008 14:46:00 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
Still no change. So do I have to face the fact that my computer
system is 4 years old and never was speedy graphic-wise?
No, this is not the problem
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly
Am Thu, 04 Dec 2008 14:46:00 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
[EMAIL PROTECTED] [EMAIL PROTECTED] writes:
Still no change. So do I have to face the fact that my computer
system is 4 years old and never was speedy graphic-wise?
No, this is not the problem
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>:
> Hello,
>
> For a long time I valued LyX for its swiftness when typing.
> Something changed recently, however and I do not
> have an idea what is causing this.
>
> When I
Am Thu, 04 Dec 2008 14:46:00 +0100
schrieb Jean-Marc Lasgouttes <[EMAIL PROTECTED]>:
> "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> writes:
> > Still no change. So do I have to face the fact that my computer
> > system is 4 years old and never was speedy graphic-w
Am Mon, 01 Dec 2008 20:30:27 -0500
schrieb rgheck [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
The problem is only happening for LyX 1.6.0. LyX 1.5.6 works as
expected on the same system.
So with 1.5.6 on the same system, everything is OK?
rh
Yes - with 1.5.6 on the same system
Am Tue, 02 Dec 2008 08:20:03 +0100
schrieb Abdelrazak Younes [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Xubuntu 8.10 with xserver-common version: 2:1.5.2-2ubuntu3
Usually, I use XFCE4 version: 4.4.2.1, I tried it now also with
openbox after Richard Hecks's tip. It was a little bit faster
Am Tue, 02 Dec 2008 16:25:09 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with
stdlib-debug?
Note that all
Am Tue, 2 Dec 2008 23:08:00 +0100
schrieb Joachim Kreimer-de Fries [EMAIL PROTECTED]:
Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
That's the correct console. Now you just need to find the LyX
binary.
If you are already in the right directory, use ./lyx to start it.
Sorry, Andre
Am Mon, 01 Dec 2008 20:30:27 -0500
schrieb rgheck [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
The problem is only happening for LyX 1.6.0. LyX 1.5.6 works as
expected on the same system.
So with 1.5.6 on the same system, everything is OK?
rh
Yes - with 1.5.6 on the same system
Am Tue, 02 Dec 2008 08:20:03 +0100
schrieb Abdelrazak Younes [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Xubuntu 8.10 with xserver-common version: 2:1.5.2-2ubuntu3
Usually, I use XFCE4 version: 4.4.2.1, I tried it now also with
openbox after Richard Hecks's tip. It was a little bit faster
Am Tue, 02 Dec 2008 16:25:09 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Abdelrazak Younes [EMAIL PROTECTED] writes:
Which version of Qt? Are you using a precompiled package or did you
compile by yourself? Maybe the package was compiled with
stdlib-debug?
Note that all
Am Tue, 2 Dec 2008 23:08:00 +0100
schrieb Joachim Kreimer-de Fries [EMAIL PROTECTED]:
Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
That's the correct console. Now you just need to find the LyX
binary.
If you are already in the right directory, use ./lyx to start it.
Sorry, Andre
Am Mon, 01 Dec 2008 20:30:27 -0500
schrieb rgheck <[EMAIL PROTECTED]>:
> [EMAIL PROTECTED] wrote:
> > The problem is only happening for LyX 1.6.0. LyX 1.5.6 works as
> > expected on the same system.
> >
> >
> So with 1.5.6 on the same system, everyth
Am Tue, 02 Dec 2008 08:20:03 +0100
schrieb Abdelrazak Younes <[EMAIL PROTECTED]>:
> [EMAIL PROTECTED] wrote:
> > Xubuntu 8.10 with xserver-common version: 2:1.5.2-2ubuntu3
> > Usually, I use XFCE4 version: 4.4.2.1, I tried it now also with
> > openbox after Richard H
Am Tue, 02 Dec 2008 16:25:09 +0100
schrieb Jean-Marc Lasgouttes <[EMAIL PROTECTED]>:
> Abdelrazak Younes <[EMAIL PROTECTED]> writes:
> > Which version of Qt? Are you using a precompiled package or did you
> > compile by yourself? Maybe the package was compiled with
Am Tue, 2 Dec 2008 23:08:00 +0100
schrieb Joachim Kreimer-de Fries <[EMAIL PROTECTED]>:
>
> Am 02.12.2008 um 19:36 schrieb Andre Poenitz:
>
> > That's the correct console. Now you just need to find the LyX
> > binary.
> >
> > If you are already in t
Am Mon, 01 Dec 2008 16:43:29 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Richard Heck [EMAIL PROTECTED] writes:
I've used LyX on much lower powered machines, without the sort of
slowness you're reporting. It may be, though, that there's something
else that's straining your
Am Mon, 01 Dec 2008 16:43:29 +0100
schrieb Jean-Marc Lasgouttes [EMAIL PROTECTED]:
Richard Heck [EMAIL PROTECTED] writes:
I've used LyX on much lower powered machines, without the sort of
slowness you're reporting. It may be, though, that there's something
else that's straining your
Am Mon, 01 Dec 2008 16:43:29 +0100
schrieb Jean-Marc Lasgouttes <[EMAIL PROTECTED]>:
> Richard Heck <[EMAIL PROTECTED]> writes:
> > I've used LyX on much lower powered machines, without the sort of
> > slowness you're reporting. It may be, though, that there's somethin
Am Sat, 29 Nov 2008 13:20:16 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have
Am Sat, 29 Nov 2008 13:20:16 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have
Am Sat, 29 Nov 2008 13:20:16 +0100
schrieb "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>:
> Am Fri, 28 Nov 2008 17:55:40 +0100
> schrieb "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>:
>
> > Hello,
> >
> > For a long time I valued LyX for its swif
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly
Am Fri, 28 Nov 2008 17:55:40 +0100
schrieb "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>:
> Hello,
>
> For a long time I valued LyX for its swiftness when typing.
> Something changed recently, however and I do not
> have an idea what is causing this.
>
> When I
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly on the screen. This makes
working with LyX really cumbersome.
I assumed this could have something
Am Fri, 28 Nov 2008 18:15:02 +0100
schrieb Andre Poenitz [EMAIL PROTECTED]:
On Fri, Nov 28, 2008 at 05:55:40PM +0100, [EMAIL PROTECTED] wrote:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what
Am Fri, 28 Nov 2008 18:11:33 +0100
schrieb Konrad Hofbauer [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly on the screen. This makes
working with LyX really cumbersome.
I assumed this could have something
Am Fri, 28 Nov 2008 18:15:02 +0100
schrieb Andre Poenitz [EMAIL PROTECTED]:
On Fri, Nov 28, 2008 at 05:55:40PM +0100, [EMAIL PROTECTED] wrote:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what
Am Fri, 28 Nov 2008 18:11:33 +0100
schrieb Konrad Hofbauer [EMAIL PROTECTED]:
[EMAIL PROTECTED] wrote:
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters
Hello,
For a long time I valued LyX for its swiftness when typing.
Something changed recently, however and I do not
have an idea what is causing this.
When I type the letters only show up slowly on the screen. This makes
working with LyX really cumbersome.
I assumed this could have something
Am Fri, 28 Nov 2008 18:15:02 +0100
schrieb Andre Poenitz <[EMAIL PROTECTED]>:
> On Fri, Nov 28, 2008 at 05:55:40PM +0100, [EMAIL PROTECTED] wrote:
> > Hello,
> >
> > For a long time I valued LyX for its swiftness when typing.
> > Something changed recently, howe
Am Fri, 28 Nov 2008 18:11:33 +0100
schrieb Konrad Hofbauer <[EMAIL PROTECTED]>:
> [EMAIL PROTECTED] wrote:
> > Hello,
> >
> > For a long time I valued LyX for its swiftness when typing.
> > Something changed recently, however and I do not
> > have an ide
Hello,
I just tried to write a letter with Lyx. For this I always use the
letter (g-brief, German) class. When I hit the button for PDF (or DVI,
it doesn't matter) export, I get the following latex errors:
1. Undefined control sequence.
[EMAIL PROTECTED]
The control sequence at the end
Hello,
I just tried to write a letter with Lyx. For this I always use the
letter (g-brief, German) class. When I hit the button for PDF (or DVI,
it doesn't matter) export, I get the following latex errors:
1. Undefined control sequence.
[EMAIL PROTECTED]
The control sequence at the end
Hello,
I just tried to write a letter with Lyx. For this I always use the
letter (g-brief, German) class. When I hit the button for PDF (or DVI,
it doesn't matter) export, I get the following latex errors:
"""
1. Undefined control sequence.
[EMAIL PROTECTED]
The control sequ
Erez Yerushalmi wrote:
Hi,
I feel that this is probably a stupid question, but I've spent so much time
trying to figure this out.
I still don't get it.
Here is what I can do so far.
1. From the examples given in wiki and other sources, I know now how to use
a .bib file with LyX and it works
Erez Yerushalmi wrote:
Hi,
I feel that this is probably a stupid question, but I've spent so much time
trying to figure this out.
I still don't get it.
Here is what I can do so far.
1. From the examples given in wiki and other sources, I know now how to use
a .bib file with LyX and it works
Erez Yerushalmi wrote:
Hi,
I feel that this is probably a stupid question, but I've spent so much time
trying to figure this out.
I still don't get it.
Here is what I can do so far.
1. From the examples given in wiki and other sources, I know now how to use
a .bib file with LyX and it works
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in parallel
as I did under Linux?
--
http://www.unmusic.co.uk Michael Reed -- technology, gender,
Uwe Stöhr wrote:
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in
parallel as I did under Linux?
Yes. I for example do this for months without
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in parallel
as I did under Linux?
--
http://www.unmusic.co.uk Michael Reed -- technology, gender,
Uwe Stöhr wrote:
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in
parallel as I did under Linux?
Yes. I for example do this for months without
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in parallel
as I did under Linux?
--
http://www.unmusic.co.uk Michael Reed -- technology, gender,
Uwe Stöhr wrote:
If I install the Windows 1.6 alpha, will it interfere with my 1.5
installation? In other words, if I install using the 1.6 installer
rather than building from the source, can I run 1.5 and 1.6 in
parallel as I did under Linux?
Yes. I for example do this for months without
Thanks for the reply.
Uwe Stöhr wrote:
1. Open MikTeX's package manager, select the bodoni package, and install it
My problems start with step one. I can't find a bodoni package to
install in MikTeX package manager. So I thought (don't know if a good
idea or not) I change the repository to
Oh, never mind, just found out that the stuff I found are just a wrapper
for corel fonts which I don't have anyway.
Uwe Stöhr wrote:
[EMAIL PROTECTED] schrieb:
I have the following question: how can I install a new font so I can
use it in Lyx?
I am currently using Lyx 1.5.4 (alt installer
Thanks for the reply.
Uwe Stöhr wrote:
1. Open MikTeX's package manager, select the bodoni package, and install it
My problems start with step one. I can't find a bodoni package to
install in MikTeX package manager. So I thought (don't know if a good
idea or not) I change the repository to
Oh, never mind, just found out that the stuff I found are just a wrapper
for corel fonts which I don't have anyway.
Uwe Stöhr wrote:
[EMAIL PROTECTED] schrieb:
I have the following question: how can I install a new font so I can
use it in Lyx?
I am currently using Lyx 1.5.4 (alt installer
Thanks for the reply.
Uwe Stöhr wrote:
1. Open MikTeX's package manager, select the bodoni package, and install it
My problems start with step one. I can't find a bodoni package to
install in MikTeX package manager. So I thought (don't know if a good
idea or not) I change the repository to
Oh, never mind, just found out that the stuff I found are just a wrapper
for corel fonts which I don't have anyway.
Uwe Stöhr wrote:
[EMAIL PROTECTED] schrieb:
I have the following question: how can I install a new font so I can
use it in Lyx?
I am currently using Lyx 1.5.4 (alt installer
I take the change given from Jenny to ask this:
How could I both don't write turn off the page number AND the count?
By istance, assume I would have to insert some color pages in a document , and
I don't want them to be counted, nor numbered.. how could I do ?
Lucio
.Hi, please does
Dear Lyx Users,
I have the following question: how can I install a new font so I can use
it in Lyx?
I am currently using Lyx 1.5.4 (alt installer) on windows vista with an
up-to-date Miktex installation and I want to use a Bodoni font in my
documents. I found this files:
I take the change given from Jenny to ask this:
How could I both don't write turn off the page number AND the count?
By istance, assume I would have to insert some color pages in a document , and
I don't want them to be counted, nor numbered.. how could I do ?
Lucio
.Hi, please does
Dear Lyx Users,
I have the following question: how can I install a new font so I can use
it in Lyx?
I am currently using Lyx 1.5.4 (alt installer) on windows vista with an
up-to-date Miktex installation and I want to use a Bodoni font in my
documents. I found this files:
I take the change given from Jenny to ask this:
How could I both don't write turn off the page number AND the count?
By istance, assume I would have to insert some color pages in a document , and
I don't want them to be counted, nor numbered.. how could I do ?
Lucio
.Hi, please does
Dear Lyx Users,
I have the following question: how can I install a new font so I can use
it in Lyx?
I am currently using Lyx 1.5.4 (alt installer) on windows vista with an
up-to-date Miktex installation and I want to use a Bodoni font in my
documents. I found this files:
Hallo !!
I've got some long titles and some long figure captions..
When making toc and table of figures, them flow over the page border.
I know that exist short titles for this, but I would like to preserv titles and
captions in the form they are (quite impossible to shorten them).
Is it
Hallo !!
I've got some long titles and some long figure captions..
When making toc and table of figures, them flow over the page border.
I know that exist short titles for this, but I would like to preserv titles and
captions in the form they are (quite impossible to shorten them).
Is it
Hallo !!
I've got some long titles and some long figure captions..
When making toc and table of figures, them flow over the page border.
I know that exist short titles for this, but I would like to preserv titles and
captions in the form they are (quite impossible to shorten them).
Is it
Hi everybody !!
Does anybody know id exists an editor for .bst files (bibliographic style files
?
Lucio
.. Caminante no hay camino, solo se hace camino al andar ..
Hi everybody !!
Does anybody know id exists an editor for .bst files (bibliographic style files
?
Lucio
.. Caminante no hay camino, solo se hace camino al andar ..
Hi everybody !!
Does anybody know id exists an editor for .bst files (bibliographic style files
?
Lucio
.. Caminante no hay camino, solo se hace camino al andar ..
Yep exactly about everything !! :o)
ps, as about /Immagini/ and Immagini/ that was my error.. in Lyx
document both were Immagini/ !!
Lucio
[EMAIL PROTECTED] wrote:
. Thanks to M-L and Paul A. Rubin for their precious and fast helps.
.
.You're welcome.
.
. I solved it removing
;o) I was wondering why did I not have to insert \usepackage{graphicx} in the
preamble !! :-P Hehe.. you did answer me !!
Anyway, those 'items' were in the same document !! ;o)
Lucio
[EMAIL PROTECTED] wrote:
. Yep exactly about everything !! :o)
.
. ps, as about /Immagini/ and Immagini
Yep exactly about everything !! :o)
ps, as about /Immagini/ and Immagini/ that was my error.. in Lyx
document both were Immagini/ !!
Lucio
[EMAIL PROTECTED] wrote:
. Thanks to M-L and Paul A. Rubin for their precious and fast helps.
.
.You're welcome.
.
. I solved it removing
;o) I was wondering why did I not have to insert \usepackage{graphicx} in the
preamble !! :-P Hehe.. you did answer me !!
Anyway, those 'items' were in the same document !! ;o)
Lucio
[EMAIL PROTECTED] wrote:
. Yep exactly about everything !! :o)
.
. ps, as about /Immagini/ and Immagini
Yep exactly about everything !! :o)
ps, as about "/Immagini/" and "Immagini/" that was my error.. in Lyx
document both were "Immagini/" !!
Lucio
[EMAIL PROTECTED] wrote:
.> Thanks to M-L and Paul A. Rubin for their precious and fast helps.
;o) I was wondering why did I not have to insert \usepackage{graphicx} in the
preamble !! :-P Hehe.. you did answer me !!
Anyway, those 'items' were in the same document !! ;o)
Lucio
[EMAIL PROTECTED] wrote:
.> Yep exactly about everything !! :o)
.>
.> ps, as about &
Ubuntu 7.10 - LyX 1.5.2
Happy new year from me too !! :o)
Lucio
.On Fri, 28 Dec 2007 15:18:39 -0700
.Bob Lounsbury [EMAIL PROTECTED] wrote:
.
. Hi,
.
. I was just curious what everyone is using. If you'd like to respond
. that's fine, if not, just ignore the message. Also, could you include
Ubuntu 7.10 - LyX 1.5.2
Happy new year from me too !! :o)
Lucio
.On Fri, 28 Dec 2007 15:18:39 -0700
.Bob Lounsbury [EMAIL PROTECTED] wrote:
.
. Hi,
.
. I was just curious what everyone is using. If you'd like to respond
. that's fine, if not, just ignore the message. Also, could you include
Ubuntu 7.10 - LyX 1.5.2
Happy new year from me too !! :o)
Lucio
.On Fri, 28 Dec 2007 15:18:39 -0700
."Bob Lounsbury" <[EMAIL PROTECTED]> wrote:
.
.> Hi,
.>
.> I was just curious what everyone is using. If you'd like to respond
.> that's fine, if not, just ignore
\columnwidth]{Immagini/e-snake.eps}
it did not have any problem.
The first was filled manually in an ERT box, the second is the source behind
normal LyX graphic insertion..
Lucio
[EMAIL PROTECTED] wrote:
. Thank you for your reply, but ehm.. sorry for ignorance, where should
. it be and how
\columnwidth]{Immagini/e-snake.eps}
it did not have any problem.
The first was filled manually in an ERT box, the second is the source behind
normal LyX graphic insertion..
Lucio
[EMAIL PROTECTED] wrote:
. Thank you for your reply, but ehm.. sorry for ignorance, where should
. it be and how
\columnwidth]{Immagini/e-snake.eps}
it did not have any problem.
The first was filled manually in an ERT box, the second is the source behind
normal LyX graphic insertion..
Lucio
[EMAIL PROTECTED] wrote:
.> Thank you for your reply, but ehm.. sorry for ignorance, where should
.> it be a
Hi all !!
I'm Lucio from Italy, new member of this mailinglist !!
I'm enthusiastic user of lyx and recently I've moved from windows to linu=
x.
I built a document in lyx for windows.. and now I'm modifying it in lyx 1=
.5.2 for linux (ubuntu gutsy gibbon 7.10)
I'm usingg this tex code in ERT
Thank you for your reply, but ehm.. sorry for ignorance, where should it be and
how is it named, the latex log ?
btw, Lyx is not reporting any warning or error ..
Lucio
[EMAIL PROTECTED] wrote:
.
.
.
. I really don't know which one could be the problem, so no idea where to l=
. ook for.. any
Hi all !!
I'm Lucio from Italy, new member of this mailinglist !!
I'm enthusiastic user of lyx and recently I've moved from windows to linu=
x.
I built a document in lyx for windows.. and now I'm modifying it in lyx 1=
.5.2 for linux (ubuntu gutsy gibbon 7.10)
I'm usingg this tex code in ERT
Thank you for your reply, but ehm.. sorry for ignorance, where should it be and
how is it named, the latex log ?
btw, Lyx is not reporting any warning or error ..
Lucio
[EMAIL PROTECTED] wrote:
.
.
.
. I really don't know which one could be the problem, so no idea where to l=
. ook for.. any
Hi all !!
I'm Lucio from Italy, new member of this mailinglist !!
I'm enthusiastic user of lyx and recently I've moved from windows to linu=
x.
I built a document in lyx for windows.. and now I'm modifying it in lyx 1=
.5.2 for linux (ubuntu gutsy gibbon 7.10)
I'm usingg this tex code in ERT
Thank you for your reply, but ehm.. sorry for ignorance, where should it be and
how is it named, the latex log ?
btw, Lyx is not reporting any warning or error ..
Lucio
[EMAIL PROTECTED] wrote:
.
.
.>
.> I really don't know which one could be the problem, so no idea where to l=
Dear Lyx Users,
I have the following problem. Whenever I generate a Lyx Document (using
all standard settings including the font and an up-to-date miktex on a
windows system) I find the € (EURO ) symbol, also the German ß (Eszett,
scharfes S) and the @ (at) quite ugly and looking out of place (as
Thanks a lot. Looking much better now.
Uwe Stöhr wrote:
[EMAIL PROTECTED] schrieb:
I find the € (EURO ) symbol, also the German ß (Eszett,
scharfes S) and the @ (at) quite ugly and looking out of place (as if
written in another font or with a different resolution).
Is this just me, or does
Dear Lyx Users,
I have the following problem. Whenever I generate a Lyx Document (using
all standard settings including the font and an up-to-date miktex on a
windows system) I find the € (EURO ) symbol, also the German ß (Eszett,
scharfes S) and the @ (at) quite ugly and looking out of place (as
Thanks a lot. Looking much better now.
Uwe Stöhr wrote:
[EMAIL PROTECTED] schrieb:
I find the € (EURO ) symbol, also the German ß (Eszett,
scharfes S) and the @ (at) quite ugly and looking out of place (as if
written in another font or with a different resolution).
Is this just me, or does
Dear Lyx Users,
I have the following problem. Whenever I generate a Lyx Document (using
all standard settings including the font and an up-to-date miktex on a
windows system) I find the € (EURO ) symbol, also the German ß (Eszett,
scharfes S) and the @ (at) quite ugly and looking out of place (as
Thanks a lot. Looking much better now.
Uwe Stöhr wrote:
> [EMAIL PROTECTED] schrieb:
>
>> I find the € (EURO ) symbol, also the German ß (Eszett,
>> scharfes S) and the @ (at) quite ugly and looking out of place (as if
>> written in another font or with a different reso
Hi,
I want to track changes in LyX in the same way that I do with my
computer programs in C++, and for that purpose I use CVS. I look at
the mail list but did not found relevant information about this.
How do you generally track the changes in your documents ? what do you
think is the best
Hi,
I want to track changes in LyX in the same way that I do with my
computer programs in C++, and for that purpose I use CVS. I look at
the mail list but did not found relevant information about this.
How do you generally track the changes in your documents ? what do you
think is the best
Hi,
I want to track changes in LyX in the same way that I do with my
computer programs in C++, and for that purpose I use CVS. I look at
the mail list but did not found relevant information about this.
How do you generally track the changes in your documents ? what do you
think is the best
Hi,
I want to track changes in LyX in the same way that I do with my
computer programs in C++, and for that purpose I use CVS. I look at
the mail list but did not found relevant information about this.
How do you generally track the changes in your documents ? what do you
think is the
1 - 100 of 242 matches
Mail list logo