On Wed, 11 Jul 2001 15:47:39 +0200 wrote Thomas de Grenier de Latour
[EMAIL PROTECTED]:
Guenter Milde wrote:
PS: Question to the gurus:
Could I have a function or macro that does this but
also changes the font to roman?
\bind C-S-underscoremath-insert _\mathrm{}
Sorry for being late on this but it is possible to create a tabular with
M-x tabular-insert 80 2
were 80 is the rows and 2 the columns! This should help to create tabulars
in ANY size.
Jürgen
P.S.: This is with lyx-1.1.6xxx.
--
(Dear documenters: could I have found it somewhere in the documentation??
-otherwise this is a documentation request)
command-sequence is an awful hack and it not being documeented is a
feature that should prevent users from using it excessivly in case the
hack will change/be removed.
Guenter Milde wrote:
Thanks for the tip with command-sequence.
Thanks for the tip with font-something, I was thinking it was only a
text mode feature (I don't know why, this kind of fix idea you never
verify). No more mathrm{blabla} in my formulas!
--
Thomas.
Hi,
My Lyx for windows doesn't work and I'm terrible sad about using Ms word
instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two x-servers:
Exceed
Xwin32
When I start Lyx I receive the message: Unable to open X display - Exiting,
with all the x-servers above.
Anyone can help
On Tue, Jul 10, 2001 at 09:58:02AM +0200, Rainer Dorsch wrote:
But that does not work, if I want to use it only in one float environment in
the document...
...I think I will write the latex code.
Then put the following at the beginning of the float you want to change
On Tue, Jul 10, 2001 at 06:24:11PM +, Paolo Pumilia wrote:
How to change the colour for the 'invisible text' layout, in 'slide'
document class?
The default colour is too similar to the background; i prefer to change the
former,
but I cannot find a relevant option under
On Wed, Jul 11, 2001 at 03:47:39PM +0200, Thomas de Grenier de Latour wrote:
Could I have a function or macro that does this but
also changes the font to roman?
define strange shortcuts. Try something like this:
\bind C-S-underscorecommand-sequence math-insert _;
math-insert
Detlev Humann wrote:
Detlev Humann wrote:
(I know that Lyx/Latex sometimes splits a footnote over two pages,
which isn´t very nice but acceptable. However, this is not my problem
as I have interfootnotelinepenalty=1 in Latex preamble. The
strange thing in my case is that
On Thu, 12 Jul 2001, Fabrizio Giammatteo wrote:
When I start Lyx I receive the message: Unable to open X display - Exiting,
with all the x-servers above.
You could try setting environment variables like
set DISPLAY=localhost:0
and replace localhost with your computer's name if the
Hi,
My Lyx for windows doesn't work and I'm terrible sad about using Ms word
instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two
x-servers:
Exceed
Xwin32
When I start Lyx I receive the message: Unable to open X display -
Exiting,
with all the x-servers above.
Anyone can
Matthias == Matthias Bunk [EMAIL PROTECTED] writes:
Matthias A little curious is that the help uses the LANG variable,
Matthias not LANGUAGE like for the menu.
Indeed, gettext uses LANGUAGE and then LANG, and help only uses LANG.
We may want to change that...
JMarc
Detlev Humann wrote:
(I know that Lyx/Latex sometimes splits a footnote over two pages,
which isn´t very nice but acceptable. However, this is not my
problem
as I have interfootnotelinepenalty=1 in Latex preamble. The
strange thing in my case is that it doesn´t make a
Detlev Humann wrote:
delte the whole latex preamble and all should work.
Well, that seems to be a radical solution. (I already tried that to find out
the reason for the behaviour.)
If I delete the whole preamble then my redefined footnote indentation gets
lost and I get a split
Group:
You may have seen my posts about trying to get what I called FloatNotes to be
in a certain place in a document. In my research, I found in _The Latex
Companion_ by Goossens, et.al., p. 149, you can go one step more than just
h,t,p,b. There is also H. h only means try to put it here
Update:
A. Poenitz found a dumb quoting error I made in yesterday's posting of this
script (note to self: don't post code at 3am when too tired to think).
The attached version is fixed and should work (I *did* check it :-)
Fernando.
-- Forwarded message --
Date: Thu, 12 Jul
I am writing a thesis in Lyx... I am finished with the thesis (I hope)
but I must add an
acknowledgement page at the beginning right after the title page and an
abstract page
at the very end.
I am using the report (textcomp) class to write it, and can not figure
out how to do this.
Both the ack
Michelle Dukich wrote:
You may have seen my posts about trying to get what I called FloatNotes to be
in a certain place in a document. In my research, I found in _The Latex
Companion_ by Goossens, et.al., p. 149, you can go one step more than just
h,t,p,b. There is also H. h only means
\interfootnotelinepenalty=1
is possible
it was your redefinition makefntext
HErbert
Sorry for one more email:
Did I get you right that there is only one alternative (((ok, latinists know
that there is always one alternative))):
Either my indentation and footnotes appear sometimes
Hallo,
i am using the natdin package in combination with lyx 1.1.6 fix 1 in
order to get a bibliography close to the german din 1505.
I use the following customizing:
preamble usepackage{natbib}
and the stayle natdin.bst
Normal cites are working finem, but the command \citet and \citep for
Hello,
i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
For columns i use the command {\columncolor[gray]{.9}} and it works
very well,
but when i try to the rowcolor command i got some trouble.
I add the package colortbl in the preamble.
It doesn't work in lyx tables i tried
Hello all,
I have just finished installing Lyx on a win2k machine running Cygwin.
When I want to spell check the document, the GUI freezes and it tells me
that the spell checker has died and that I should install a dictionary. I
am using American/English. I thought the dictionaries for
Arnd Geldermann wrote:
i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
For columns i use the command {\columncolor[gray]{.9}} and it works
very well,
but when i try to the rowcolor command i got some trouble.
I add the package colortbl in the preamble.
It doesn't work in
Amer Abufadel wrote:
I have just finished installing Lyx on a win2k machine running Cygwin.
When I want to spell check the document, the GUI freezes and it tells me
that the spell checker has died and that I should install a dictionary. I
am using American/English. I thought the
I tried that, still it did not work..
- Original Message -
From: Herbert Voss [EMAIL PROTECTED]
To: Amer Abufadel [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, July 12, 2001 3:46 PM
Subject: Re: Ispell Problem
Amer Abufadel wrote:
I have just finished installing Lyx
Im trying to export html via latex2html but it don't work.
Remarks:
I'm using a system-wide big include file with my own /newcommand
definitions like \newcommand{\firma}[1]{\textbf{#1}}for word
formating purposes. So I need a way to include this for a html
output. This has to be done
On Thu, 12 Jul 2001, Thomas Templin wrote:
Im trying to export html via latex2html but it don't work.
See my earlier message from a few hours ago (with subject line UPDATE: LyX
to (html,ps,pdf) script). It's Perl script designed to do exactly that
(plus giving you pdf and ps along the way),
On Friday, 13. July 2001 00:25, Fernando Pérez wrote:
On Thu, 12 Jul 2001, Thomas Templin wrote:
Im trying to export html via latex2html but it don't work.
See my earlier message from a few hours ago (with subject line
UPDATE: LyX to (html,ps,pdf) script). It's Perl script designed
to do
Hi!
I'm trying to convert some foiltex to pdf for a presentation.
I put \usepackage[ps2pdf]{hyperref} in the latex preamble.
ps2pdf works fine but the colors and the fonts come out terrible on
acroread on the pc. Any ideas?
Thanks,
--
myriam
IM: tokujawa
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
On 12 Jul 2001, Myriam Abramson wrote:
Hi!
I'm trying to convert some foiltex to pdf for a presentation.
I put \usepackage[ps2pdf]{hyperref} in the latex preamble.
ps2pdf works fine but the colors and the fonts come out terrible on
acroread on the pc. Any ideas?
Thanks,
Here are
Hi!
Thanks for everybody who fixed my font problem.
Now what do I do with those landscape slides to come out correctly?
Redo them?
--
myriam
As seen in a coffee shop in Monterey, CA,
George W. Bush's counter:
1288 days left till he's gone
Hi!
Getting LyX installed on my WinME was not really
that easy :) compared to installing MikTeX + WinEdt; however, since I might
recommend it for use on other PCs at work, Linux and Win2K, I tried to get a
feeling of what it is and does.
1. Cygwin installed
fine
2. X-Win32 installed
fine
- Original Message -
From:
Mostafa Modirrousta
To: [EMAIL PROTECTED]
Cc: Mostafa Modirrousta
Sent: Friday, July 13, 2001 12:09
AM
Subject: LyX + WinME + MikTeX
Hi!
Getting LyX installed on my WinME was not really
that easy :) compared to installing
On 12 Jul 2001, Myriam Abramson wrote:
Hi!
Thanks for everybody who fixed my font problem.
Now what do I do with those landscape slides to come out correctly?
Redo them?
I am guessing that you are mixing landscape and portrait slides?
I've always found that using RotateFoilhead or
On Wed, 11 Jul 2001 15:47:39 +0200 wrote Thomas de Grenier de Latour
[EMAIL PROTECTED]:
Guenter Milde wrote:
PS: Question to the gurus:
Could I have a function or macro that does this but
also changes the font to roman?
\bind C-S-underscoremath-insert _\mathrm{}
Sorry for being late on this but it is possible to create a tabular with
M-x tabular-insert 80 2
were 80 is the rows and 2 the columns! This should help to create tabulars
in ANY size.
Jürgen
P.S.: This is with lyx-1.1.6xxx.
--
(Dear documenters: could I have found it somewhere in the documentation??
-otherwise this is a documentation request)
command-sequence is an awful hack and it not being documeented is a
feature that should prevent users from using it excessivly in case the
hack will change/be removed.
Guenter Milde wrote:
Thanks for the tip with command-sequence.
Thanks for the tip with font-something, I was thinking it was only a
text mode feature (I don't know why, this kind of fix idea you never
verify). No more mathrm{blabla} in my formulas!
--
Thomas.
Hi,
My Lyx for windows doesn't work and I'm terrible sad about using Ms word
instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two x-servers:
Exceed
Xwin32
When I start Lyx I receive the message: Unable to open X display - Exiting,
with all the x-servers above.
Anyone can help
On Tue, Jul 10, 2001 at 09:58:02AM +0200, Rainer Dorsch wrote:
But that does not work, if I want to use it only in one float environment in
the document...
...I think I will write the latex code.
Then put the following at the beginning of the float you want to change
On Tue, Jul 10, 2001 at 06:24:11PM +, Paolo Pumilia wrote:
How to change the colour for the 'invisible text' layout, in 'slide'
document class?
The default colour is too similar to the background; i prefer to change the
former,
but I cannot find a relevant option under
On Wed, Jul 11, 2001 at 03:47:39PM +0200, Thomas de Grenier de Latour wrote:
Could I have a function or macro that does this but
also changes the font to roman?
define strange shortcuts. Try something like this:
\bind C-S-underscorecommand-sequence math-insert _;
math-insert
Detlev Humann wrote:
Detlev Humann wrote:
(I know that Lyx/Latex sometimes splits a footnote over two pages,
which isn´t very nice but acceptable. However, this is not my problem
as I have interfootnotelinepenalty=1 in Latex preamble. The
strange thing in my case is that
On Thu, 12 Jul 2001, Fabrizio Giammatteo wrote:
When I start Lyx I receive the message: Unable to open X display - Exiting,
with all the x-servers above.
You could try setting environment variables like
set DISPLAY=localhost:0
and replace localhost with your computer's name if the
Hi,
My Lyx for windows doesn't work and I'm terrible sad about using Ms word
instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two
x-servers:
Exceed
Xwin32
When I start Lyx I receive the message: Unable to open X display -
Exiting,
with all the x-servers above.
Anyone can
Matthias == Matthias Bunk [EMAIL PROTECTED] writes:
Matthias A little curious is that the help uses the LANG variable,
Matthias not LANGUAGE like for the menu.
Indeed, gettext uses LANGUAGE and then LANG, and help only uses LANG.
We may want to change that...
JMarc
Detlev Humann wrote:
(I know that Lyx/Latex sometimes splits a footnote over two pages,
which isn´t very nice but acceptable. However, this is not my
problem
as I have interfootnotelinepenalty=1 in Latex preamble. The
strange thing in my case is that it doesn´t make a
Detlev Humann wrote:
delte the whole latex preamble and all should work.
Well, that seems to be a radical solution. (I already tried that to find out
the reason for the behaviour.)
If I delete the whole preamble then my redefined footnote indentation gets
lost and I get a split
Group:
You may have seen my posts about trying to get what I called FloatNotes to be
in a certain place in a document. In my research, I found in _The Latex
Companion_ by Goossens, et.al., p. 149, you can go one step more than just
h,t,p,b. There is also H. h only means try to put it here
Update:
A. Poenitz found a dumb quoting error I made in yesterday's posting of this
script (note to self: don't post code at 3am when too tired to think).
The attached version is fixed and should work (I *did* check it :-)
Fernando.
-- Forwarded message --
Date: Thu, 12 Jul
I am writing a thesis in Lyx... I am finished with the thesis (I hope)
but I must add an
acknowledgement page at the beginning right after the title page and an
abstract page
at the very end.
I am using the report (textcomp) class to write it, and can not figure
out how to do this.
Both the ack
Michelle Dukich wrote:
You may have seen my posts about trying to get what I called FloatNotes to be
in a certain place in a document. In my research, I found in _The Latex
Companion_ by Goossens, et.al., p. 149, you can go one step more than just
h,t,p,b. There is also H. h only means
\interfootnotelinepenalty=1
is possible
it was your redefinition makefntext
HErbert
Sorry for one more email:
Did I get you right that there is only one alternative (((ok, latinists know
that there is always one alternative))):
Either my indentation and footnotes appear sometimes
Hallo,
i am using the natdin package in combination with lyx 1.1.6 fix 1 in
order to get a bibliography close to the german din 1505.
I use the following customizing:
preamble usepackage{natbib}
and the stayle natdin.bst
Normal cites are working finem, but the command \citet and \citep for
Hello,
i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
For columns i use the command {\columncolor[gray]{.9}} and it works
very well,
but when i try to the rowcolor command i got some trouble.
I add the package colortbl in the preamble.
It doesn't work in lyx tables i tried
Hello all,
I have just finished installing Lyx on a win2k machine running Cygwin.
When I want to spell check the document, the GUI freezes and it tells me
that the spell checker has died and that I should install a dictionary. I
am using American/English. I thought the dictionaries for
Arnd Geldermann wrote:
i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
For columns i use the command {\columncolor[gray]{.9}} and it works
very well,
but when i try to the rowcolor command i got some trouble.
I add the package colortbl in the preamble.
It doesn't work in
Amer Abufadel wrote:
I have just finished installing Lyx on a win2k machine running Cygwin.
When I want to spell check the document, the GUI freezes and it tells me
that the spell checker has died and that I should install a dictionary. I
am using American/English. I thought the
I tried that, still it did not work..
- Original Message -
From: Herbert Voss [EMAIL PROTECTED]
To: Amer Abufadel [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, July 12, 2001 3:46 PM
Subject: Re: Ispell Problem
Amer Abufadel wrote:
I have just finished installing Lyx
Im trying to export html via latex2html but it don't work.
Remarks:
I'm using a system-wide big include file with my own /newcommand
definitions like \newcommand{\firma}[1]{\textbf{#1}}for word
formating purposes. So I need a way to include this for a html
output. This has to be done
On Thu, 12 Jul 2001, Thomas Templin wrote:
Im trying to export html via latex2html but it don't work.
See my earlier message from a few hours ago (with subject line UPDATE: LyX
to (html,ps,pdf) script). It's Perl script designed to do exactly that
(plus giving you pdf and ps along the way),
On Friday, 13. July 2001 00:25, Fernando Pérez wrote:
On Thu, 12 Jul 2001, Thomas Templin wrote:
Im trying to export html via latex2html but it don't work.
See my earlier message from a few hours ago (with subject line
UPDATE: LyX to (html,ps,pdf) script). It's Perl script designed
to do
Hi!
I'm trying to convert some foiltex to pdf for a presentation.
I put \usepackage[ps2pdf]{hyperref} in the latex preamble.
ps2pdf works fine but the colors and the fonts come out terrible on
acroread on the pc. Any ideas?
Thanks,
--
myriam
IM: tokujawa
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
On 12 Jul 2001, Myriam Abramson wrote:
Hi!
I'm trying to convert some foiltex to pdf for a presentation.
I put \usepackage[ps2pdf]{hyperref} in the latex preamble.
ps2pdf works fine but the colors and the fonts come out terrible on
acroread on the pc. Any ideas?
Thanks,
Here are
Hi!
Thanks for everybody who fixed my font problem.
Now what do I do with those landscape slides to come out correctly?
Redo them?
--
myriam
As seen in a coffee shop in Monterey, CA,
George W. Bush's counter:
1288 days left till he's gone
Hi!
Getting LyX installed on my WinME was not really
that easy :) compared to installing MikTeX + WinEdt; however, since I might
recommend it for use on other PCs at work, Linux and Win2K, I tried to get a
feeling of what it is and does.
1. Cygwin installed
fine
2. X-Win32 installed
fine
- Original Message -
From:
Mostafa Modirrousta
To: [EMAIL PROTECTED]
Cc: Mostafa Modirrousta
Sent: Friday, July 13, 2001 12:09
AM
Subject: LyX + WinME + MikTeX
Hi!
Getting LyX installed on my WinME was not really
that easy :) compared to installing
On 12 Jul 2001, Myriam Abramson wrote:
Hi!
Thanks for everybody who fixed my font problem.
Now what do I do with those landscape slides to come out correctly?
Redo them?
I am guessing that you are mixing landscape and portrait slides?
I've always found that using RotateFoilhead or
On Wed, 11 Jul 2001 15:47:39 +0200 wrote Thomas de Grenier de Latour
<[EMAIL PROTECTED]>:
> Guenter Milde wrote:
> >
> > PS: Question to the gurus:
> >
> > Could I have a function or macro that does this but
> > also changes the font to roman?
> >
> > \bind "C-S-underscore"
Sorry for being late on this but it is possible to create a tabular with
M-x tabular-insert 80 2
were 80 is the rows and 2 the columns! This should help to create tabulars
in ANY size.
Jürgen
P.S.: This is with lyx-1.1.6xxx.
--
> (Dear documenters: could I have found it somewhere in the documentation??
> ->otherwise this is a documentation request)
command-sequence is an awful hack and it not being documeented is a
"feature" that should prevent users from using it excessivly in case the
hack will change/be removed.
Guenter Milde wrote:
>
> Thanks for the tip with "command-sequence".
>
Thanks for the tip with "font-something", I was thinking it was only a
text mode feature (I don't know why, this kind of fix idea you never
verify). No more mathrm{blabla} in my formulas!
--
Thomas.
Hi,
My Lyx for windows doesn't work and I'm terrible sad about using Ms word
instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two x-servers:
Exceed
Xwin32
When I start Lyx I receive the message: Unable to open X display - Exiting,
with all the x-servers above.
Anyone can help
On Tue, Jul 10, 2001 at 09:58:02AM +0200, Rainer Dorsch wrote:
>
> But that does not work, if I want to use it only in one float environment in
> the document...
>
> ...I think I will write the latex code.
Then put the following at the beginning of the float you want to change
On Tue, Jul 10, 2001 at 06:24:11PM +, Paolo Pumilia wrote:
> How to change the colour for the 'invisible text' layout, in 'slide'
> document class?
> The default colour is too similar to the background; i prefer to change the
> former,
> but I cannot find a relevant option under
On Wed, Jul 11, 2001 at 03:47:39PM +0200, Thomas de Grenier de Latour wrote:
> > Could I have a function or macro that does this but
> > also changes the font to roman?
>
> define strange shortcuts. Try something like this:
> \bind "C-S-underscore""command-sequence math-insert _;
>
Detlev Humann wrote:
>
> > > Detlev Humann wrote:
> > >
> > > (I know that Lyx/Latex sometimes splits a footnote over two pages,
> > > which isn´t very nice but acceptable. However, this is not my problem
> > > as I have interfootnotelinepenalty=1 in Latex preamble. The
> > > strange thing
On Thu, 12 Jul 2001, Fabrizio Giammatteo wrote:
> When I start Lyx I receive the message: Unable to open X display - Exiting,
> with all the x-servers above.
You could try setting environment variables like
set DISPLAY=localhost:0
and replace localhost with your computer's name if the
> Hi,
> My Lyx for windows doesn't work and I'm terrible sad about using Ms word
> instead, I installed lyx 1.1.6 fix2 c,cygwin, miktex and I have two
x-servers:
>
> Exceed
> Xwin32
>
> When I start Lyx I receive the message: Unable to open X display -
Exiting,
> with all the x-servers above.
>
>
> "Matthias" == Matthias Bunk <[EMAIL PROTECTED]> writes:
Matthias> A little curious is that the help uses the LANG variable,
Matthias> not LANGUAGE like for the menu.
Indeed, gettext uses LANGUAGE and then LANG, and help only uses LANG.
We may want to change that...
JMarc
> > > > Detlev Humann wrote:
> > > >
> > > > (I know that Lyx/Latex sometimes splits a footnote over two pages,
> > > > which isn´t very nice but acceptable. However, this is not my
problem
> > > > as I have interfootnotelinepenalty=1 in Latex preamble. The
> > > > strange thing in my case is
Detlev Humann wrote:
>
> >
> > delte the whole latex preamble and all should work.
> >
> Well, that seems to be a radical solution. (I already tried that to find out
> the reason for the behaviour.)
> If I delete the whole preamble then my redefined footnote indentation gets
> lost and I get a
Group:
You may have seen my posts about trying to get what I called "FloatNotes" to be
in a certain place in a document. In my research, I found in _The Latex
Companion_ by Goossens, et.al., p. 149, you can go one step more than just
h,t,p,b. There is also H. h only means "try to put it here"
Update:
A. Poenitz found a dumb quoting error I made in yesterday's posting of this
script (note to self: don't post code at 3am when too tired to think).
The attached version is fixed and should work (I *did* check it :-)
Fernando.
-- Forwarded message --
Date: Thu, 12 Jul
I am writing a thesis in Lyx... I am finished with the thesis (I hope)
but I must add an
acknowledgement page at the beginning right after the title page and an
abstract page
at the very end.
I am using the report (textcomp) class to write it, and can not figure
out how to do this.
Both the ack
Michelle Dukich wrote:
>
> You may have seen my posts about trying to get what I called "FloatNotes" to be
> in a certain place in a document. In my research, I found in _The Latex
> Companion_ by Goossens, et.al., p. 149, you can go one step more than just
> h,t,p,b. There is also H. h only
> \interfootnotelinepenalty=1
>
> is possible
>
> it was your redefinition makefntext
>
> HErbert
>
Sorry for one more email:
Did I get you right that there is only one alternative (((ok, latinists know
that there is always one alternative))):
Either my indentation and footnotes appear
Hallo,
i am using the natdin package in combination with lyx 1.1.6 fix 1 in
order to get a bibliography close to the german din 1505.
I use the following customizing:
preamble usepackage{natbib}
and the stayle natdin.bst
Normal cites are working finem, but the command \citet and \citep for
Hello,
i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
For columns i use the command >{\columncolor[gray]{.9}} and it works
very well,
but when i try to the rowcolor command i got some trouble.
I add the package colortbl in the preamble.
It doesn't work in lyx tables i tried
Hello all,
I have just finished installing Lyx on a win2k machine running Cygwin.
When I want to spell check the document, the GUI freezes and it tells me
that the spell checker has died and that I should install a dictionary. I
am using American/English. I thought the dictionaries for
Arnd Geldermann wrote:
>
> i am using lyx 1.1.6 fix 1 and i want to colour rows in tables.
> For columns i use the command >{\columncolor[gray]{.9}} and it works
> very well,
> but when i try to the rowcolor command i got some trouble.
> I add the package colortbl in the preamble.
> It doesn't
Amer Abufadel wrote:
>
> I have just finished installing Lyx on a win2k machine running Cygwin.
> When I want to spell check the document, the GUI freezes and it tells me
> that the spell checker has died and that I should install a dictionary. I
> am using American/English. I thought the
I tried that, still it did not work..
- Original Message -
From: "Herbert Voss" <[EMAIL PROTECTED]>
To: "Amer Abufadel" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, July 12, 2001 3:46 PM
Subject: Re: Ispell Problem
> Amer Abufadel wrote:
> >
> > I have just finished
Im trying to export html via latex2html but it don't work.
Remarks:
I'm using a system-wide big include file with my own /newcommand
definitions like \newcommand{\firma}[1]{\textbf{#1}}for word
formating purposes. So I need a way to include this for a html
output. This has to be done
On Thu, 12 Jul 2001, Thomas Templin wrote:
> Im trying to export html via latex2html but it don't work.
>
See my earlier message from a few hours ago (with subject line UPDATE: LyX
to (html,ps,pdf) script). It's Perl script designed to do exactly that
(plus giving you pdf and ps along the
On Friday, 13. July 2001 00:25, Fernando Pérez wrote:
> On Thu, 12 Jul 2001, Thomas Templin wrote:
> > Im trying to export html via latex2html but it don't work.
>
> See my earlier message from a few hours ago (with subject line
> UPDATE: LyX to (html,ps,pdf) script). It's Perl script designed
>
Hi!
I'm trying to convert some foiltex to pdf for a presentation.
I put \usepackage[ps2pdf]{hyperref} in the latex preamble.
ps2pdf works fine but the colors and the fonts come out terrible on
acroread on the pc. Any ideas?
Thanks,
--
myriam
IM: tokujawa
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
1 - 100 of 105 matches
Mail list logo
