Ralph == Ralph P Boland [EMAIL PROTECTED] writes:
Ralph Note that in order to do this to the amsart.layout file I had
Ralph to put a copy of it in my .lyx/layouts directory and modify it.
Ralph This is certainly clumsy and risky in that subsequent versions
Ralph of lyx might modify the
Hello,
I've found the layouts based on svjour.cls: svjog.layout and
svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
always get the message
+checking for document class svjog [svjour,svjog.clo]... no
Is there anything else I have to do?
Thanks,
Rainer Hoffmann
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a sections panel
with, say, chapter, section, subsection,... and another, say,
mathematical
What exactly do I have to do on a plain english setup to make LyX appear
with German dialogs etc?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was entering them as ERT.
An example is attached.
I have no problem with your file (not that the
Andre Poenitz wrote:
What exactly do I have to do on a plain english setup to make LyX appear
with German dialogs etc?
Well, if you insist on not _installing_ LyX then you'll need to run a script
in you builddir po file to put the stuff where gettext expects to find it.
I have run this in
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to tell
gettext to look in this directory. A quick grep of the sources should dig
out the appropriate environment variable if nobody else puts you out of
your
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a sections panel
with, say, chapter, section, subsection,... and another, say,
mathematical
On Friday 21 February 2003 12:17 pm, Andre Poenitz wrote:
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to tell
gettext to look in this directory.
Doesn't work ...
Am I right in assuming that all I need is to
On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
... and tell gettext to look in this dir by setting an environment variable.
(I forget which. Look at the source.)
setenv is only used in filetools.C by PutEnv. This in turn is only used by
PutEnvPath, and this is never used?
how
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
Andre Poenitz wrote:
On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
... and tell gettext to look in this dir by setting an environment
variable. (I forget which. Look at the source.)
setenv is only used in filetools.C by PutEnv. This in turn is only used by
PutEnvPath, and
On Fri, Feb 21, 2003 at 01:33:45PM +0100, Andre' Poenitz wrote:
Does setting this to lyx-build/po solve your problems?
No.
Ok, maybe I should just install the beast.
Are the Standard rpms relocatable?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have,
Lorenzo Campos Venuti wrote:
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
From INSTALL:
* Qt
Andre == Andre Poenitz [EMAIL PROTECTED] writes:
Andre On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to
tell gettext to look in this directory.
Andre Doesn't work ...
Andre Am I right in assuming that all I need
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 12:34, Dekel Tsur wrote:
On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
Hello,
Do you have installed the latex-ttf.rpm (something
Hello,
I am trying to insert a math symbol into the super script, but latex
seems to hate it very much.
I know I can use ERT and make it like $^{\mu}$. However it appears in
itallic shape. I guess \textrm will make it stand straight. But if I
put math symbol in like \textrm{\mu}, latex
I want to add a header to an document (article class). I've tried
document-pagestyle-fancy, along with Herbert's
Author-/Titlename in header
Write in latex preamble:
\let\oldAuthor\author
\renewcommand{\author}[1]{\newcommand{\myAuthor}{#1}\oldAuthor{#1}}
\let\oldTitle\title
Hello
I downloaded 1.3.0, configured and compiled it in the without
problems.
However I could not see that qt was used, instead it seemed to me the
old xform library had been used. Do I have to force lyx using the qt
library (I have 2.3.0)
2. Instant preview was announced, but how do I enable
Uwe Brauer wrote:
Hello
I downloaded 1.3.0, configured and compiled it in the without
problems.
However I could not see that qt was used, instead it seemed to me the
old xform library had been used. Do I have to force lyx using the qt
library (I have 2.3.0)
configure --with-frontend=qt
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 20:24, Uwe Brauer wrote:
2. Instant preview was announced, but how do I enable it. I looked up
in the help and the icon, nothing
Edit-Preferencies...-Graphics
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP
Hello all
I am using the all-new Lyx 1.3.0 with the Qt GUI on Mandrake 9 and I
must say it is superb. Lots of kudos to the development team :-)
I have a document with a myriad of acronyms (3 or 4 letters) in it.
There is not a clear pattern on those acronyms to do a search replace
on them.
On Fri, 21 Feb 2003, Hoffmann, Rainer wrote:
| I've found the layouts based on svjour.cls: svjog.layout and
| svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
| always get the message +checking for document class svjog
| [svjour,svjog.clo]... no
have you had svjour.cls
I followed the recent debate about lyx and Greek. I use a lot of ancient
Greek quotations: although I cannot see Greek while editing, I am
satisfied with the excellent DVI output. I have been requested to send
a PDF file: in these cases, when I have no Greek, I use one of the
PS packages
On 21 Feb 2003, Paco Cruz wrote:
Hello all
I have a document with a myriad of acronyms (3 or 4 letters) in it.
There is not a clear pattern on those acronyms to do a search replace
on them.
Well, I need to build a macro (or something :-) ) to do the following:
I mark the acronym in
On Friday 21 February 2003 11:29 am, Max Bian wrote:
I know I can use ERT and make it like $^{\mu}$. However it appears in
itallic shape. I guess \textrm will make it stand straight. But if I
put math symbol in like \textrm{\mu}, latex complains.
Is there other way to do it?
Have a
Ralph == Ralph P Boland [EMAIL PROTECTED] writes:
Ralph Note that in order to do this to the amsart.layout file I had
Ralph to put a copy of it in my .lyx/layouts directory and modify it.
Ralph This is certainly clumsy and risky in that subsequent versions
Ralph of lyx might modify the
Hello,
I've found the layouts based on svjour.cls: svjog.layout and
svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
always get the message
+checking for document class svjog [svjour,svjog.clo]... no
Is there anything else I have to do?
Thanks,
Rainer Hoffmann
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a sections panel
with, say, chapter, section, subsection,... and another, say,
mathematical
What exactly do I have to do on a plain english setup to make LyX appear
with German dialogs etc?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was entering them as ERT.
An example is attached.
I have no problem with your file (not that the
Andre Poenitz wrote:
What exactly do I have to do on a plain english setup to make LyX appear
with German dialogs etc?
Well, if you insist on not _installing_ LyX then you'll need to run a script
in you builddir po file to put the stuff where gettext expects to find it.
I have run this in
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to tell
gettext to look in this directory. A quick grep of the sources should dig
out the appropriate environment variable if nobody else puts you out of
your
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a sections panel
with, say, chapter, section, subsection,... and another, say,
mathematical
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to tell
gettext to look in this directory.
Doesn't work ...
Am I right in assuming that all I need is to copy
lyx-devel/po/de.gmo
to
On Friday 21 February 2003 12:17 pm, Andre Poenitz wrote:
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to tell
gettext to look in this directory.
Doesn't work ...
Am I right in assuming that all I need is to
On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
... and tell gettext to look in this dir by setting an environment variable.
(I forget which. Look at the source.)
setenv is only used in filetools.C by PutEnv. This in turn is only used by
PutEnvPath, and this is never used?
how
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
Andre Poenitz wrote:
On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
... and tell gettext to look in this dir by setting an environment
variable. (I forget which. Look at the source.)
setenv is only used in filetools.C by PutEnv. This in turn is only used by
PutEnvPath, and
On Fri, Feb 21, 2003 at 01:33:45PM +0100, Andre' Poenitz wrote:
Does setting this to lyx-build/po solve your problems?
No.
Ok, maybe I should just install the beast.
Are the Standard rpms relocatable?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have,
Lorenzo Campos Venuti wrote:
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
From INSTALL:
* Qt
Andre == Andre Poenitz [EMAIL PROTECTED] writes:
Andre On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
I have run this in the past (attached). Thereafter, you'll have to
tell gettext to look in this directory.
Andre Doesn't work ...
Andre Am I right in assuming that all I need
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 12:34, Dekel Tsur wrote:
On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
Hello,
Do you have installed the latex-ttf.rpm (something
Hello,
I am trying to insert a math symbol into the super script, but latex
seems to hate it very much.
I know I can use ERT and make it like $^{\mu}$. However it appears in
itallic shape. I guess \textrm will make it stand straight. But if I
put math symbol in like \textrm{\mu}, latex
I want to add a header to an document (article class). I've tried
document-pagestyle-fancy, along with Herbert's
Author-/Titlename in header
Write in latex preamble:
\let\oldAuthor\author
\renewcommand{\author}[1]{\newcommand{\myAuthor}{#1}\oldAuthor{#1}}
\let\oldTitle\title
Hello
I downloaded 1.3.0, configured and compiled it in the without
problems.
However I could not see that qt was used, instead it seemed to me the
old xform library had been used. Do I have to force lyx using the qt
library (I have 2.3.0)
2. Instant preview was announced, but how do I enable
Uwe Brauer wrote:
Hello
I downloaded 1.3.0, configured and compiled it in the without
problems.
However I could not see that qt was used, instead it seemed to me the
old xform library had been used. Do I have to force lyx using the qt
library (I have 2.3.0)
configure --with-frontend=qt
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 20:24, Uwe Brauer wrote:
2. Instant preview was announced, but how do I enable it. I looked up
in the help and the icon, nothing
Edit-Preferencies...-Graphics
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP
Hello all
I am using the all-new Lyx 1.3.0 with the Qt GUI on Mandrake 9 and I
must say it is superb. Lots of kudos to the development team :-)
I have a document with a myriad of acronyms (3 or 4 letters) in it.
There is not a clear pattern on those acronyms to do a search replace
on them.
On Fri, 21 Feb 2003, Hoffmann, Rainer wrote:
| I've found the layouts based on svjour.cls: svjog.layout and
| svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
| always get the message +checking for document class svjog
| [svjour,svjog.clo]... no
have you had svjour.cls
I followed the recent debate about lyx and Greek. I use a lot of ancient
Greek quotations: although I cannot see Greek while editing, I am
satisfied with the excellent DVI output. I have been requested to send
a PDF file: in these cases, when I have no Greek, I use one of the
PS packages
On 21 Feb 2003, Paco Cruz wrote:
Hello all
I have a document with a myriad of acronyms (3 or 4 letters) in it.
There is not a clear pattern on those acronyms to do a search replace
on them.
Well, I need to build a macro (or something :-) ) to do the following:
I mark the acronym in
On Friday 21 February 2003 11:29 am, Max Bian wrote:
I know I can use ERT and make it like $^{\mu}$. However it appears in
itallic shape. I guess \textrm will make it stand straight. But if I
put math symbol in like \textrm{\mu}, latex complains.
Is there other way to do it?
Have a
> "Ralph" == Ralph P Boland <[EMAIL PROTECTED]> writes:
Ralph> Note that in order to do this to the amsart.layout file I had
Ralph> to put a copy of it in my .lyx/layouts directory and modify it.
Ralph> This is certainly clumsy and risky in that subsequent versions
Ralph> of lyx might modify
Hello,
I've found the layouts based on svjour.cls: svjog.layout and
svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
always get the message
+checking for document class svjog [svjour,svjog.clo]... no
Is there anything else I have to do?
Thanks,
Rainer Hoffmann
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a "sections" panel
with, say, chapter, section, subsection,... and another, say,
"mathematical"
What exactly do I have to do on a "plain english setup" to make LyX appear
with German dialogs etc?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
> >Do you try to use these symbol in math mode ?
> >If not, give a short example file.
> >
>
> The symbols don't work at all in Maths mode. I was entering them as ERT.
> An example is attached.
I have no problem with your file (not
Andre Poenitz wrote:
>
> What exactly do I have to do on a "plain english setup" to make LyX appear
> with German dialogs etc?
Well, if you insist on not _installing_ LyX then you'll need to run a script
in you builddir po file to put the stuff where gettext expects to find it.
I have run
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
> I have run this in the past (attached). Thereafter, you'll have to tell
> gettext to look in this directory. A quick grep of the sources should dig
> out the appropriate environment variable if nobody else puts you out of
> your
Hello,
This might be difficult to implement, or simply undesired, but how about
detachable groups like in the symbols in the math-panel (in 1.3.0-Qt
this seems very convenient). I could then detach a "sections" panel
with, say, chapter, section, subsection,... and another, say,
"mathematical"
On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
> I have run this in the past (attached). Thereafter, you'll have to tell
> gettext to look in this directory.
Doesn't work ...
Am I right in assuming that all I need is to copy
lyx-devel/po/de.gmo
to
On Friday 21 February 2003 12:17 pm, Andre Poenitz wrote:
> On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
> > I have run this in the past (attached). Thereafter, you'll have to tell
> > gettext to look in this directory.
>
> Doesn't work ...
>
> Am I right in assuming that all I
On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
> ... and tell gettext to look in this dir by setting an environment variable.
> (I forget which. Look at the source.)
setenv is only used in filetools.C by PutEnv. This in turn is only used by
PutEnvPath, and this is never used?
how
Hi guys,
I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
he cannot render many characters like \sum \int all the greek alphabet
and so on.
Does any of you have an idea where the problem is?
thanks a lot
lorenzo
Andre Poenitz wrote:
> On Fri, Feb 21, 2003 at 12:20:52PM +, Angus Leeming wrote:
>> ... and tell gettext to look in this dir by setting an environment
>> variable. (I forget which. Look at the source.)
>
> setenv is only used in filetools.C by PutEnv. This in turn is only used by
>
On Fri, Feb 21, 2003 at 01:33:45PM +0100, Andre' Poenitz wrote:
> > Does setting this to lyx-build/po solve your problems?
>
> No.
Ok, maybe I should just install the beast.
Are the "Standard" rpms relocatable?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not
Lorenzo Campos Venuti wrote:
> Hi guys,
>
> I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
> he cannot render many characters like \sum \int all the greek alphabet
> and so on.
> Does any of you have an idea where the problem is?
>
> thanks a lot
>
> lorenzo
>From
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
Andre> On Fri, Feb 21, 2003 at 11:39:49AM +, Angus Leeming wrote:
>> I have run this in the past (attached). Thereafter, you'll have to
>> tell gettext to look in this directory.
Andre> Doesn't work ...
Andre> Am I right in assuming
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 12:34, Dekel Tsur wrote:
> On Fri, Feb 21, 2003 at 08:19:36AM +1030, owen lucas wrote:
> > >Do you try to use these symbol in math mode ?
> > >If not, give a short example file.
> >
> > The symbols don't work at all in Maths mode. I
>Hi guys,
>I just installed the new LyX 1.3.0 with QT GUI. It looks very good but
>he cannot render many characters like \sum \int all the greek alphabet
>and so on.
>Does any of you have an idea where the problem is?
>thanks a lot
>lorenzo
Hello,
Do you have installed the "latex-ttf.rpm"
Hello,
I am trying to insert a math symbol into the super script, but latex
seems to hate it very much.
I know I can use ERT and make it like "$^{\mu}$. However it appears in
itallic shape. I guess "\textrm" will make it stand straight. But if I
put math symbol in like \textrm{\mu}, latex
I want to add a header to an document (article class). I've tried
document->pagestyle->fancy, along with Herbert's
Author-/Titlename in header
Write in latex preamble:
\let\oldAuthor\author
\renewcommand{\author}[1]{\newcommand{\myAuthor}{#1}\oldAuthor{#1}}
\let\oldTitle\title
Hello
I downloaded 1.3.0, configured and compiled it in the without
problems.
However I could not see that qt was used, instead it seemed to me the
old xform library had been used. Do I have to force lyx using the qt
library (I have 2.3.0)
2. Instant preview was announced, but how do I enable
Uwe Brauer wrote:
> Hello
>
> I downloaded 1.3.0, configured and compiled it in the without
> problems.
> However I could not see that qt was used, instead it seemed to me the
> old xform library had been used. Do I have to force lyx using the qt
> library (I have 2.3.0)
configure
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 21. Februar 2003 20:24, Uwe Brauer wrote:
> 2. Instant preview was announced, but how do I enable it. I looked up
>in the help and the icon, nothing
Edit->Preferencies...->Graphics
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN
Hello all
I am using the all-new Lyx 1.3.0 with the Qt GUI on Mandrake 9 and I
must say it is superb. Lots of kudos to the development team :-)
I have a document with a myriad of acronyms (3 or 4 letters) in it.
There is not a clear pattern on those acronyms to do a search & replace
on them.
On Fri, 21 Feb 2003, Hoffmann, Rainer wrote:
| I've found the layouts based on svjour.cls: svjog.layout and
| svprobth.layout. Unfortunately, when I reconfigure lyx (version 1.2.2) I
| always get the message +checking for document class svjog
| [svjour,svjog.clo]... no
have you had svjour.cls
I followed the recent debate about lyx and Greek. I use a lot of ancient
Greek quotations: although I cannot see Greek while editing, I am
satisfied with the excellent DVI output. I have been requested to send
a PDF file: in these cases, when I have no Greek, I use one of the
PS packages
On 21 Feb 2003, Paco Cruz wrote:
> Hello all
>
> I have a document with a myriad of acronyms (3 or 4 letters) in it.
> There is not a clear pattern on those acronyms to do a search & replace
> on them.
>
> Well, I need to build a macro (or something :-) ) to do the following:
>
> I mark the
On Friday 21 February 2003 11:29 am, Max Bian wrote:
> I know I can use ERT and make it like "$^{\mu}$. However it appears in
> itallic shape. I guess "\textrm" will make it stand straight. But if I
> put math symbol in like \textrm{\mu}, latex complains.
>
> Is there other way to do it?
83 matches
Mail list logo
