Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text in the
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to something else so the qt
Jorgen Johansson wrote:
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to
Hi:
I am a newbie with Lyx and have played with it
for little more than an hour but fail printing.
I think that I installed all the bits and pieces
indicated in the Lyx/Mac web page: gimp-print,
esp ghostscript. I have also set the name of my
printer which I found in /private/etc/printcap,
On Fri, Sep 12, 2003 at 01:07:35PM +0200, Gattuso, Jean-Pierre wrote:
Hi:
I am a newbie with Lyx and have played with it
for little more than an hour but fail printing.
I think that I installed all the bits and pieces
indicated in the Lyx/Mac web page: gimp-print,
esp ghostscript. I
Kornel Benko wrote:
Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Michael Chabon schrieb:
Pardon my ignorance... I have found this, but how do I install it to use
with Lyx? and once it's installed, how to I use it?
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instpackages
read the doc, to see how it works
Herbert
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
Herbert Voß [EMAIL PROTECTED] writes:
| Lars Gullik Bjønnes schrieb:
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to
Hi Jorgen,
I am using
AFPL Ghostscript 8.11
D:\Program Files\ImageMagick-5.5.7-Q8\
That's strange. I moved back to ImageMagick Q8 (from Q16) and I was
using Ghostscript 8.11 all the time. But still I cannot convert a
sample file.
convert test.eps test.bmp
or
convert test.eps
On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
convert test.eps test.bmp
or
convert test.eps test.ppm
from the command line doesn't work (but the correct convert.exe is
called, so the path is ok somehow). Still, ghostscript is complaining
about
Thanks for the information, \sslash using stmaryrd package in the
preamble did the job.
Cláudio
Dekel Tsur wrote:
On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using
Greetings.
Is there a tutorial that teaches the newbie user how to use hyperref to create
hypertext links in a table of contents in Lyx? I have looked, but I haven't
found anything.
Thanks.
Mike
[EMAIL PROTECTED] wrote:
Is there a tutorial that teaches the newbie user how to use hyperref to
create hypertext links in a table of contents in Lyx? I have looked, but I
haven't found anything.
A very comfortable solution is the tex2pdf script, which uses hyperref,
thumbpdf etc.
The
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Michael Chabon wrote:
Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
As with any package, the first thing you need to do is make it available
to LaTeX. Put it somewhere inside your LaTeX
Hi Andre,
On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
convert test.eps test.bmp
or
convert test.eps test.ppm
from the command line doesn't work (but the correct convert.exe is
called, so the path is ok somehow). Still, ghostscript is complaining
about
robin schrieb:
Using it in LyX depends on whether it's supported by LyX. If it is,
then all you have to do is click Edit-Reconfigure, then restart LyX and
you can use it just like any other document class. If it isn't, then you
will need to put LaTeX commands in your Preamble (in LyX 1.3.*
On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
I was referring to the use of ImageMagick and Ghostscript on the
windows platform (you are apparently using *nix).
I noticed that.
Somehow ImageMagick and GS don't work together on my platform
(WinXP) but it seems that
Hi Andre,
On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
I was referring to the use of ImageMagick and Ghostscript on the
windows platform (you are apparently using *nix).
I noticed that.
Sorry for stating the obvious ;-) I was just loosing track of the
whole thread
Hi:
I am a newbie with Lyx and have played with it for little more than an
hour but fail printing.
I think that I installed all the bits and pieces indicated in the
Lyx/Mac web page: gimp-print, esp ghostscript. I have also set the
name of my printer which I found in /private/etc/printcap,
Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text in the
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to something else so the qt
Jorgen Johansson wrote:
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to
Hi:
I am a newbie with Lyx and have played with it
for little more than an hour but fail printing.
I think that I installed all the bits and pieces
indicated in the Lyx/Mac web page: gimp-print,
esp ghostscript. I have also set the name of my
printer which I found in /private/etc/printcap,
On Fri, Sep 12, 2003 at 01:07:35PM +0200, Gattuso, Jean-Pierre wrote:
Hi:
I am a newbie with Lyx and have played with it
for little more than an hour but fail printing.
I think that I installed all the bits and pieces
indicated in the Lyx/Mac web page: gimp-print,
esp ghostscript. I
Kornel Benko wrote:
Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Michael Chabon schrieb:
Pardon my ignorance... I have found this, but how do I install it to use
with Lyx? and once it's installed, how to I use it?
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instpackages
read the doc, to see how it works
Herbert
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
Herbert Voß [EMAIL PROTECTED] writes:
| Lars Gullik Bjønnes schrieb:
Rich Shepard [EMAIL PROTECTED] writes:
| On Fri, 12 Sep 2003, Owen Lucas wrote:
highlight the image then go layout paragraph then select center.
| Thanks, Owen. I received a private reply with the same solution. As I had
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to
Hi Jorgen,
I am using
AFPL Ghostscript 8.11
D:\Program Files\ImageMagick-5.5.7-Q8\
That's strange. I moved back to ImageMagick Q8 (from Q16) and I was
using Ghostscript 8.11 all the time. But still I cannot convert a
sample file.
convert test.eps test.bmp
or
convert test.eps
On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
convert test.eps test.bmp
or
convert test.eps test.ppm
from the command line doesn't work (but the correct convert.exe is
called, so the path is ok somehow). Still, ghostscript is complaining
about
Thanks for the information, \sslash using stmaryrd package in the
preamble did the job.
Cláudio
Dekel Tsur wrote:
On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
Sorry to make this silly question, but I'm writing a paper containing
crystallographic notations using
Greetings.
Is there a tutorial that teaches the newbie user how to use hyperref to create
hypertext links in a table of contents in Lyx? I have looked, but I haven't
found anything.
Thanks.
Mike
[EMAIL PROTECTED] wrote:
Is there a tutorial that teaches the newbie user how to use hyperref to
create hypertext links in a table of contents in Lyx? I have looked, but I
haven't found anything.
A very comfortable solution is the tex2pdf script, which uses hyperref,
thumbpdf etc.
The
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Michael Chabon wrote:
Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
As with any package, the first thing you need to do is make it available
to LaTeX. Put it somewhere inside your LaTeX
Hi Andre,
On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
convert test.eps test.bmp
or
convert test.eps test.ppm
from the command line doesn't work (but the correct convert.exe is
called, so the path is ok somehow). Still, ghostscript is complaining
about
robin schrieb:
Using it in LyX depends on whether it's supported by LyX. If it is,
then all you have to do is click Edit-Reconfigure, then restart LyX and
you can use it just like any other document class. If it isn't, then you
will need to put LaTeX commands in your Preamble (in LyX 1.3.*
On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
I was referring to the use of ImageMagick and Ghostscript on the
windows platform (you are apparently using *nix).
I noticed that.
Somehow ImageMagick and GS don't work together on my platform
(WinXP) but it seems that
Hi Andre,
On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
I was referring to the use of ImageMagick and Ghostscript on the
windows platform (you are apparently using *nix).
I noticed that.
Sorry for stating the obvious ;-) I was just loosing track of the
whole thread
Hi:
I am a newbie with Lyx and have played with it for little more than an
hour but fail printing.
I think that I installed all the bits and pieces indicated in the
Lyx/Mac web page: gimp-print, esp ghostscript. I have also set the
name of my printer which I found in /private/etc/printcap,
Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text in the
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
> Hi,
>
> I have a little problem concerning the vertical alignment of text in
> table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
> first column containing simple text and the
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to something else so the qt
Jorgen Johansson wrote:
Hello again,
I am not sure what was going on, but I noticed in the about box that qt
lyx was not using the shared library under its own installation. It was
using the shared libraries for the lyx 1.3.1 version (under cygwin).
I renamed temporary my cygwin directory to
Hi:
I am a newbie with Lyx and have played with it
for little more than an hour but fail printing.
I think that I installed all the bits and pieces
indicated in the Lyx/Mac web page: gimp-print,
esp ghostscript. I have also set the name of my
printer which I found in /private/etc/printcap,
On Fri, Sep 12, 2003 at 01:07:35PM +0200, Gattuso, Jean-Pierre wrote:
> Hi:
>
> I am a newbie with Lyx and have played with it
> for little more than an hour but fail printing.
>
> I think that I installed all the bits and pieces
> indicated in the Lyx/Mac web page: gimp-print,
> esp
Kornel Benko wrote:
> Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
> alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Michael Chabon schrieb:
Pardon my ignorance... I have found this, but how do I install it to use
with Lyx? and once it's installed, how to I use it?
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instpackages
read the doc, to see how it works
Herbert
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
Herbert Voß <[EMAIL PROTECTED]> writes:
| Lars Gullik Bjønnes schrieb:
>> Rich Shepard <[EMAIL PROTECTED]> writes:
>> | On Fri, 12 Sep 2003, Owen Lucas wrote:
>>
highlight the image then go layout paragraph then select center.
>>>
>> | Thanks, Owen. I received a private reply with the same
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
> Jan W. Schemm schrieb:
> > Still doesn't work. Lyx produced the following Latex-Code, but the
> > vertical alignment is still messed up.
>
> give a LyX example file.
Seems to be ok now. Each call to
Hi Jorgen,
> I am using
> AFPL Ghostscript 8.11
> D:\Program Files\ImageMagick-5.5.7-Q8\
That's strange. I moved back to ImageMagick Q8 (from Q16) and I was
using Ghostscript 8.11 all the time. But still I cannot convert a
sample file.
convert test.eps test.bmp
or
convert test.eps
On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
> convert test.eps test.bmp
> or
> convert test.eps test.ppm
>
> from the command line doesn't work (but the correct convert.exe is
> called, so the path is ok somehow). Still, ghostscript is complaining
> about
Thanks for the information, \sslash using stmaryrd package in the
preamble did the job.
Cláudio
Dekel Tsur wrote:
>
> On Thu, Sep 11, 2003 at 03:02:24PM -0300, Cl?udio Geraldo Sch?n wrote:
> > Sorry to make this silly question, but I'm writing a paper containing
> > crystallographic notations
Greetings.
Is there a tutorial that teaches the newbie user how to use hyperref to create
hypertext links in a table of contents in Lyx? I have looked, but I haven't
found anything.
Thanks.
Mike
[EMAIL PROTECTED] wrote:
> Is there a tutorial that teaches the newbie user how to use hyperref to
> create hypertext links in a table of contents in Lyx? I have looked, but I
> haven't found anything.
A very comfortable solution is the tex2pdf script, which uses hyperref,
thumbpdf etc.
The
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Michael Chabon wrote:
Pardon my ignorance... I have found this, but how do I install it to
use with Lyx? and once it's installed, how to I use it?
Thanks for the help.
MC
As with any package, the first thing you need to do is make it available
to LaTeX. Put it somewhere inside your LaTeX
Hi Andre,
> On Fri, Sep 12, 2003 at 05:11:25PM +0200, Ben Liesfeld wrote:
>> convert test.eps test.bmp
>> or
>> convert test.eps test.ppm
>>
>> from the command line doesn't work (but the correct convert.exe is
>> called, so the path is ok somehow). Still, ghostscript is complaining
>>
robin schrieb:
Using it in LyX depends on whether it's supported by LyX. If it is,
then all you have to do is click Edit->Reconfigure, then restart LyX and
you can use it just like any other document class. If it isn't, then you
will need to put LaTeX commands in your Preamble (in LyX 1.3.*
On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
> I was referring to the use of ImageMagick and Ghostscript on the
> windows platform (you are apparently using *nix).
I noticed that.
> Somehow ImageMagick and GS don't work together on my platform
> (WinXP) but it seems
Hi Andre,
> On Fri, Sep 12, 2003 at 06:09:49PM +0200, Ben Liesfeld wrote:
>> I was referring to the use of ImageMagick and Ghostscript on the
>> windows platform (you are apparently using *nix).
> I noticed that.
Sorry for stating the obvious ;-) I was just loosing track of the
whole thread
Hi:
I am a newbie with Lyx and have played with it for little more than an
hour but fail printing.
I think that I installed all the bits and pieces indicated in the
Lyx/Mac web page: gimp-print, esp ghostscript. I have also set the
name of my printer which I found in /private/etc/printcap,
72 matches
Mail list logo