Michael,
What exactly were you trying to do, and what steps did you take?
Your initial message doesn’t really give me enough information to understand
how things could have got to the state they did. There is obviously still a
Macintosh HD partition.
Is your machine still bootable from the
Yes, you can change this behavior in the text tab, but you can also use vo-v to
do it quicker.
Best,
Zack.
On Jul 25, 2014, at 10:54 AM, Devin Prater d.pra...@me.com wrote:
It's the text atributes. I think it's in the text tab of the verbosity pane.
On Jul 25, 2014, at 12:45, Eleanor Martha
Hi,
I would wonder if it was a bad drive. Do you have another machine you can test
it with?
The odds of it being a mac-specific problem are slim, though I guess we can’t
firmly rule it out.
Best,
Zack.
On Jul 23, 2014, at 9:57 AM, Devin Prater d.pra...@me.com wrote:
Hi all. I just found a
Jason,
The current version of iBooks for OS X is not as accessible as you might want.
The table of contents can be opened with command-t. You’ll need to turn off
cursor tracking, or possibly use the Item Chooser, or another method to choose
the section you want.
If all goes well, Apple will
I’ve noticed this on a couple of occasions. First is when a Mail message is
formatted as HTML. In this case the message is basically a web page.
The second is when a message has not yet downloaded. The solution to this is to
just try opening the message again, at which point it seems to work
Have you hit the eject key on the MacBook Air? IF you hold it down the drive
should open and eject whatever CD is inside.
Best,
Zack.
On Jun 23, 2014, at 6:33 PM, Juaanita Marttin jordmar...@suddenlink.net wrote:
I’m in the process of putting my cd’s onto my Mac Book Air. I put a cd in
and
to use the command in iTunes?
On Jun 23, 2014, at 8:35 PM, Zachary Kline zkl...@speedpost.net wrote:
Have you hit the eject key on the MacBook Air? IF you hold it down the drive
should open and eject whatever CD is inside.
Best,
Zack.
On Jun 23, 2014, at 6:33 PM, Juaanita Marttin jordmar
Hi Will,
You can only quit an event by choosing to start a new one, from the options
screen there is a new event button. Alternatively, you can bust out. QUitting
and restarting the app is not recommended, and shouldn’t be needed in any case.
If you set announcements to none, VoiceOver will do
No, I don’t think this is what you want. You seem to want the actual DropBox
app, which is free. You don’t find it in the Mac app store, you get it from the
DropBox web site, www.dropbox.com.
This assumes you have DropBox on the old laptop, too. If you don’t, you need to
also get it there and
Gordon,
No, as far as I remember when you reboot you don’t need to hold down anything.
I’ve never installed Windows from a USB stick, though, but it stands to reason
Apple would tell you to hold down something on reboot if that were necessary
Best,
Zack.
On Jun 2, 2014, at 4:52 AM, Gordon Smith
Ian,
If possible, I would recommend against putting anything on the keyboard
directly, at least of the MBA. It’s a standard qwerty keyboard, not unusually
laid out like most mini Bluetooth models tend to be.
More generally, I recommend against relying on solutions like this if possible.
They
Margaret,
I'd love to help you with this, but there are a couple things you should be
aware of first. iCloud only syncs certain data for specific programs. If you
don’t use these on both the Mac and iOS you won’t see a lot of benefit to
turning on the documents and data feature. In
Hi,
I have a couple answers for you. The thing which seems to have been broken is
reading of what is selected when you use the arrow keys in lists. You can still
select if you interact, with vo-command-enter on each track you want to chose.
I can’t duplicate the problem with autocompleted song
Eric,
The problem is that you have told Mail to show all headers by default. If you
hit cmd-shift-h, you will switch to just seeing the basic ones.
Best,
Zack.
On May 16, 2014, at 1:29 PM, Eric Caron eric_ca...@mac-access.net wrote:
Hi listers,
When I forward a message in mail it
, shift, h, and there was no change. I do hear VO say
Default Headers.
Any tips on how I can adjust the default headers or another way to get rid of
all the forwarding prefix chatter.
Eric Caron
On May 16, 2014, at 4:34 PM, Zachary Kline zkl...@speedpost.net wrote:
Eric,
The problem
William,
Can you give us more information? You don’t tell us anything about what view
you’re in, for instance, which is a really important part of answering this
kind of question. I have never experienced this focus issue you describe.
Without more info I can’t begin to suggest what might be
ARe you holding the eject button for a few seconds?
Best,
Zack.
On May 9, 2014, at 2:13 PM, David Griffith d.griff...@btinternet.com wrote:
Sarah on this list passed a tip to me which has helped me in this situation.
Restart your Mac and whilst it is restarting hold a finger down on the
George,
Did you mute the sounds using the VoiceOver rotor?
Best,
Zack.
On May 8, 2014, at 7:09 PM, George Cham george.c...@mac-access.net wrote:
For some reason, when I receive text messages or email, I'm not hearing the
sounds. Its not on mute.
Anyone else having the same problem?
Hi,
You have Mail set to notify you of new messages, which you can change in Mail
preferences. You can set it to only notify you of messages from people on the
VIP list, which is empty normally unless you add to it. Mail Preferences -
General, New Message notifications.
Best,
Zack.
On May 1,
PDF support in general is lacking, unfortunately. I’m afraid a Word version is
probably a much better idea.
Best,
Zack.
On Apr 29, 2014, at 7:35 AM, Harmony Neil harmony.n...@gmail.com wrote:
Hellow,
I’ve been trying to fill in a pdf form in preview, but although I unlocked it
and it says I
For what it’s worth, my experience is rather the opposite. I always set the
mouse to follow the VO cursor, and it seems to solve more problems than it
causes. That being said, I haven’t noticed these focus issues consistently at
all.
Best,
Zack.
On Apr 19, 2014, at 11:43 AM, Anne Robertson
Hi,
For practical purposes they do the same thing. You can use one or the other,
though i always use command-o for some reason. It doesn’t matter very much.
Best,
Zack.
On Apr 12, 2014, at 4:52 PM, don bishop w6...@donbishop.org wrote:
Hi,
I don’t understand the difference between the
No, iCloud is not quite that simple. it’s not a virtual folder, it’s more like
each app has its own folder, and they only interact in specific ways. You can
typically send files from one iCloud app to another, through the file menu in
TextEdit for instance.
It’s not really the most intuitive
Hi,
I hate to be the barer of bad news, but it wouldn’t work even with the specific
version on the site. Mono apps, and X11 apps in general, are inaccessible with
VoiceOver. This was frustrating to me, as I wanted to try the game as well, but
the only thing we can do is write to the app
THe command ou want is a three-finger double tap on the trackpad.
Hope this helps,
Zack.
On Mar 27, 2014, at 2:34 PM, Juanita Martin jordmar...@suddenlink.net wrote:
I was playing with the track pad trying to get through several hundred
messages and I muted VO. I don't know how I did it, so
Hi,
Unfortunately, I don’t have any info for you, at least not in terms of
solutions. I have to say this problem has been impacting me too. I hope they
fix the app soon.
Best,
Zack.
On Mar 24, 2014, at 6:02 PM, Sarah k Alawami marri...@gmail.com wrote:
I used it to read an ebook once, but
Hi,
I’ve had reasonable success highlighting line-by-line across pages. Is this not
working for others?
Best,
Zack.
On Mar 20, 2014, at 10:29 PM, Nicholas Parsons mr.nicholas.pars...@gmail.com
wrote:
I've been having the same issue. It drives me a bit bananas as well. Seems to
be a bit of a
Hi,
THis is a VoiceOver crash, and should not be happening. might I suggest using
the web rotor instead? It’s a sortable list of the elements on a web page, and
more focused than the Item CHooser. Try it with cmd-u.
That being said, I’d report this one to Apple Accessibility. I don’t use the
Dane,
The problem with these files generally is that they aren’t intended to be read
by most programs. It’s much easier to read them on a Braille notetaker or
Braille display with some file storage abilities, like the Braille Edge from
Hims.
That being said, the Bard Mobile app is able to
Hi,
I’d be surprised if you’d messed up the functions on the trackpad. I think the
three-finger double tap is hardcoded and can’t be changed.
I’d try it again just to be sure.
Beyond that, if you have a Braille display you can toggle speech on from there.
I believe the command is s-chord.
Best,
Not with iMessage directly, though you can paste audio and video files into the
message area, I believe. Facetime does let you do audio or video conferencing
like Skype, however.
On Mar 7, 2014, at 9:55 AM, Dane Trethowan grtd...@internode.on.net wrote:
I know you can send text messages, can
Hi,
iMessage on the Mac is pretty simple to set up. If you open up the Messages app
chances are it’s already configured, or if not you just need to go into the
accounts or System Preferences and add it. I’d be very surprised if it wasn’t
already working though, especially if you’re running the
Richie,
Frankly, I think you’re probably best upgrading to at least Mountain Lion, I’m
afraid. Leopard is very old by this point, relatively speaking, and hasn’t been
updated in a long while. iCloud replaced Mobile Me a couple years back, and I’d
be surprised if Mobile Me passwords continued to
Jim,
Are you using the name “Guest,” by chance? There is a default guest account I
believe.
Best,
Zack.
On Mar 4, 2014, at 2:08 PM, Jim Noseworthy jim.nosewor...@compuconference.com
wrote:
Hi Folks:
I am trying to create an anonymous account on my Mack Mini butI am informed
that there is
Dan,
File transfers are in their own separate window, which you can bring up from
the Window menu. You should be able to accept and monitor them from there.
Best,
Zack.
On Mar 3, 2014, at 12:38 PM, Dan Eickmeier va3ets2...@me.com wrote:
Hi all, in Messages on the Mac, under Mavericks 10.9.2, I
Did you have a FInder window open at the time to look at what was on the drive?
You can’t look at it and erase it at the same time.
Best,
Zack.
On Mar 2, 2014, at 11:06 AM, George Cham george.c...@mac-access.net wrote:
I just tried to erase the drive, but got the error message could not unmount
George,
By the sound of it there’s something going on with the drive, not the OS. If
you can’t create a folder perhaps the drive is write-protected, so you can’t do
anything to change it, or in the wrong format.
Is this a new hard drive?
Best,
Zack.
On Mar 1, 2014, at 11:31 AM, George Cham
George,
Just because a drive is supposed to work on “both PC and Mac,” doesn’t mean it
will help with Time Machine. Time Machine drives need to be specially formatted
for the Mac specifically. You go into DIsk Utility and choose to erase it,
reformat, and it should work.
Best,
Zack.
On Mar 1,
Yes, calling or reporting these bugs is important. Apple accessibility are
great people, but they’re only human. :) I must say I didn’t notice this bug
until you pointed it out, and it is far from the worst thing that could be
wrong.
ALl the best,
Zack.
On Feb 26, 2014, at 5:10 PM, Sarah k
Chris,
If I might suggest that you wait a few hours? The update appears to be
staggered a little bit in terms of release, probably to avoid overloading
Apple's servers unnecessarily. It will reach your machine in due course. I am
well aware of what is and is not up for discussion under the NDA,
Hi Sean,
I’ve found that column view is problematic when I interact with folders with
lots of files. I just use the normal (non-VO) arrow keys for this and it works
well enough.
Best,
Zack.
On Feb 22, 2014, at 3:53 PM, Sean Murphy smur7...@bigpond.net.au wrote:
Hi have found it is related to
I think these guys might also be the ones responsible for the Prompt secure
Shell client. It works very well on iOS. I'm afraid I don't have any contacts
with them personally, but at the very least they should be open to trying to
make their other programs accessible.
Sent from my iPhone
On
Sean,
The problem is that there is no one specific cause for busy messages. They can
be caused by large folders, particularly in column view. How large is your
documents folder, or how many files does it have? I am using an upgraded copy
of Mavrics and notice no consistent Finder busy messages.
Dónal,
I’m not sure why these shortcuts should have vanished. Have you checked the
Keyboard Shortcuts section of System Preferences? Perhaps they are unchecked in
there for some reason. I’m not sure why they should be , but it’s the most
likely possibility I can think of.
Best,
Zack.
On Feb 18,
Nisus has native RTF support, which Pages currently lacks, and arguably some
more powerful features and scripting abilities, etc. Still, I’ve been using
Pages more and more lately, and it’s definitely worth having alternatives.
Best,
Zack.
On Feb 16, 2014, at 2:52 AM, Dane Trethowan
Stewart,
Can you clarify what exactly happens when you try to interact? I haven’t seen
this before, these dialogs work consistently well for me.
Best,
Zack.
On Jan 29, 2014, at 11:02 AM, Stuart Young stuartyo...@samobile.net wrote:
Hi.
I am having a problem ware every time i go to by an ibook
Douglas,
The answer to your first question is that yes, you can do this. The way to set
it up is go to the header or footer where you want your page numbers to appear,
and if your mouse is tracking the VoiceOVer cursor, which it ought to be if you
didn’t consciously change it, a popover will
Hi Nick and all,
Navigation across multiple pages with VoiceOver is still something I’m
struggling with. I believe once you get to the right headers and footers you’ll
find the page numbers are read properly. It’s a lot better than it was before,
but still not perfect.
Best,
Zack.
On Jan 21,
Dane,
This is a problem caused by using voice over navigation to move to the tweet
you intend to reply to, instead of using the arrow keys on their own. I
invariably use the arrow keys to navigate in this particular app, and have not
encountered this dislocation. If you use either quick nav or
Emacs or another programmer’s text editor will certainly be able to do this,
but the problem of VoiceOVer accessibility will still be there.
I’ve managed to get Emacspeak working on the Mac, but it wasn’t the most
intuitive process as far as I recall. I do recommend it though, contrary to the
I believe he should be able to close the current finder window, which is
causing issues. After doing this, he can try rebooting the computer or force
finder to relaunch itself.
To close the Finder window, try command-w. TO force Finder to relaunch, open
the Force Quit dialog with
before the filename can be read.
I am increasingly thinking it is a specification issue if others are not
encountering this level of problems.
David Griffith
.
-Original Message-
From: mac-access-boun...@mac-access.net
[mailto:mac-access-boun...@mac-access.net] On Behalf Of Zachary Kline
Hi Mark,
Updates have nearly always in my experience been free. I’ve known a few cases
where an app developer charges a fee for a new version, but that seems to be
quite rare, especially on the Mac App Store.
Best,
Zack.
On Dec 19, 2013, at 11:47 AM, Mark Furness flintma...@gmail.com wrote:
Hi,
It’s possible that I’m not used to how it’s supposed to work. I don’t have very
specific document formatting requirements, so tend to draft only and trust it
to do the right thing. Perhaps I ought to look into it more thoroughly.
Best,
Zack.
On Dec 19, 2013, at 8:49 PM, Nicholas Parsons
This is a known problem under TextEdit. The solution is to use “Wrap to
Window,” mode instead of “Wrap to page.” You can toggle this on with
cmd-shift-w.
Best,
Zack.
On Dec 18, 2013, at 11:19 AM, Christian Schoepplein ch...@schoeppi.net wrote:
Hi,
since 10.9 and also with 10.9.1 there is
, at 11:32 AM, Christian Schoepplein ch...@schoeppi.net wrote:
Hi Zack,
thanks for this helpfull hint. But how can I deal with this problem in Nisus
Writer Pro? Has anyone a workaround for this app?
Cheers,
Chris
Am 18.12.2013 um 20:23 schrieb Zachary Kline zkl...@speedpost.net
Hi,
THis is an odd question, but are you using the earphones which came with
your iPhone, or another set which has a button to control playing music
and such?
I ask because if your headset is failing, you can occasionally trigger
random presses of the play button like this. I'd recommend
Chris,
I can't say I have. But then again I haven't made a habit of turning volume
down so low, so perhaps it's something reproducible. I don't really care to try
though. :-)
All the best,
Zack.
Sent from my iPhone
On Dec 15, 2013, at 2:26 PM, Chris Goodwin ckgoodwi...@googlemail.com wrote:
I'll just say that this is a weird one, I haven't experienced it here myself.
I'm able to open webpages pretty seamlessly.
All the best,
Zack.
Sent from my iPhone
On Dec 11, 2013, at 1:46 PM, Bryan Jones openses...@me.com wrote:
Hi Martin,
I will second Phil’s message. I’ve been
Hi,
There is a way to just run programs from the image. :-) You don't actually have
to install the UnInstaller, so to speak. That being said, the program in
question hasn't been updated for a while… I'm actually not sure what its
current status is.
Best,
Zack.
Sent from my iPhone
On Dec 10,
PM, Zachary Kline zkl...@speedpost.net wrote:
Hi,
There is a way to just run programs from the image. :-) You don't actually
have to install the UnInstaller, so to speak. That being said, the program
in question hasn't been updated for a while… I'm actually not sure what its
current
These folders should be under the account in the Mailboxes list, especially
since you can move messages to them.
Best,
Zack.
On Dec 7, 2013, at 10:00 AM, Haghighi,Amin haghi...@oclc.org wrote:
Created an exchange account and imported my mails from outlook 360. to apple
mail
In outlook I had
mail boxes table.
I don’t know where else to look.
On Dec 7, 2013, at 1:05 PM, Zachary Kline zkl...@speedpost.net wrote:
These folders should be under the account in the Mailboxes list, especially
since you can move messages to them.
Best,
Zack.
On Dec 7, 2013, at 10:00 AM, Haghighi
Paul,
This process isn’t going to help with VoiceOVer bugs. It isn’t something
recommended for general use, it’s more a troubleshooting step. It wipes some
values in computer memory, but nothing we average users need to worry about.
DOn’t bother doing it :)
Best,
Zack.
On Dec 6, 2013, at 2:40
I think manual is your only option, I'm afraid. I'm not sure why they
eliminated the options from iTunes, but they appear to have done so.
Best,
Zack.
Sent from my iPhone
On Dec 5, 2013, at 3:12 PM, Dónal Fitzpatrick dfitz...@computing.dcu.ie
wrote:
Hi all,
Just got a new iPad air. As
Hi Linda,
If you use the Open item from the file menu, you can select individual songs or
whole directories, which will be added and copied to the library. This is a
little easier than adding stuff to the Music folder yourself, as iTUnes
generally tries to keep that organized on its own.
Best,
Linda,
I think you can do this a lot easier than you describe below. You don’t need to
manually add music to the folder, it will be automatically copied there by
iTunes and sorted properly. If your music is, say, on an external drive, you
can go to the File-Add to Library menu item in iTunes,
Linda,
If i’m understanding you properly, you are using the ordinary space bar and not
VOiceOver Space. The best way I can explain this is to say that you’re probably
accidentally hitting the play button without actually selecting a song in the
way a sighted person understands it. Hitting
This prejudice against .DocX files seems unfounded. I can open them just fine
with TextEdit or Pages.
Best,
Zack.
On Nov 28, 2013, at 7:28 AM, Douglas Rudolph doug@me.com wrote:
I can also say .. I am a University of saskatchewan student, and we use
blackboard. This is one of the few
Brian,
The apps you’ll want in this case are probably the iWork suite, which consists
of Numbers, Pages, and Keynote. They are separate apps from Apple, and work on
an iPad Mini quite nicely.
Best,
Zack.
On Nov 25, 2013, at 12:23 PM, Brian Dalton li...@briandalton.org wrote:
Hi.
I'm using
George,
The VO commands you want are vo-comma to mark an item for dragging, and
vo-period to drop an item. These are listed in VO help. As for the Mailbox
menu, you should definitely be able to access it with VO-m, just like any other
menu.
Best,
Zack.
On Nov 16, 2013, at 12:22 PM, George Cham
I can confirm this one. Opening an attachment from the Quick Look window fails
with a crash.
Best,
Zack.
On Nov 15, 2013, at 11:35 AM, Dónal Fitzpatrick dfitz...@computing.dcu.ie
wrote:
Folks,
Just want to confirm a bug before I take the trouble to wrestle with Apple’s
bugreporter.
Weird one. I’ve never seen this, and use Numbers fairly extensively. I’ll keep
an eye out.
Best,
Zack.
On Nov 15, 2013, at 3:26 PM, Sarah k Alawami marri...@gmail.com wrote:
Yeah I’m finding I have to reboot often as well. Memory keeper which I use
for memory management only shows I have 2
Andy,
Things like this are handled through the Skype web site. You want to log on to
www.skype.com, and you’ll find options to edit all sorts of things. Certainly
the Skype name will probably be one.
Hope this helps,
Zack.
On Nov 12, 2013, at 9:56 AM, Andy Collins a...@recreation.plus.com wrote:
Shanon,
You can do this kind of thing with mail rules. Go into Mail Preferences -
Rules tab, and you can add a rule which will delete all messages from a
specific email address.
These are, as far as I’m aware, global.
Best,
Zack.
On Nov 10, 2013, at 7:24 PM, Shannon Reece
Chris,
It is possible that Gmail weirdness is at fault. Gmail is somewhat notorious
for a non-standard mail server implementation. In other words, just because
Mail says you have an unread message doesn’t mean you do.
Best,
Zack.
On Nov 8, 2013, at 9:50 AM, Chris H christopher...@gmail.com
Terminal. :) ALternatively, the built-in Archive Utility seems to do a good
enough job for my needs.
Best,
Zack.
On Nov 7, 2013, at 6:03 AM, Caitlyn furness caitlyn.furn...@gmail.com wrote:
I’m still using the unarchiver.
There was an update for it not long ago.
when did they say it’s no
Hi Michael,
The command changed to vo-cmd-enter to toggle and vi-enter to select individual
items.
Best,
Zack.
On Nov 4, 2013, at 1:20 PM, Michael Marshall mightymaggie...@gmail.com wrote:
hey listers,
i’m having a bit of a problem. in mountain lion i could interact with a list
of files,
? you
also rote VI-enter?
when i hit VO CMD enter it just selected everything as i went down the list.
why did they have to change it at all?
thanks
Michael
On 5 Nov 2013, at 8:22 am, Zachary Kline zkl...@speedpost.net wrote:
Hi Michael,
The command changed to vo-cmd-enter to toggle
:
Looks like I need to update my Mavericks tutorial. I skipped that part
completely. Oops.
Tc all.
On Nov 4, 2013, at 15:20, Zachary Kline zkl...@speedpost.net wrote:
Hi,
I meant vo-cmd-enter and vo-enter. They changed it because vo-cmd-space now
opens the actions menu, which is a new
Hi Brian,
Interesting. I don’t listen to web page summaries, so never noticed this
behavior. I always just start navigating with quicknav or vo-cmd keys, and it
works. That’s definitely a weird bug.
Best,
Zack.
On Nov 3, 2013, at 9:01 AM, Bryan Jones openses...@me.com wrote:
Yes, I can confirm
Hi,
You can use vo-end or vo-home to jump to the beginning or end of a table. As
for lists, perhaps you might look into groups mode? I believe they are treated
as separate entities in that case, and you can use the same keystroke to jumpy
o their ends.
Best,
Zack.
On Nov 3, 2013, at 10:18 AM,
Hi Andy,
You need to double tap on the text field, and generally use the rotor to
navigate to wherever you want to continue typing. Note that this was made a bit
harder under iOS 7, as VO seems to move in text fields if you accidentally tap
them. I presume you’re talking about iOS here, and not
find the final fullstop,
and begin typing after it, only to find the text has been put in front of
what was there instead of following it. This isn't an issue when writing mail
or using text editor, but is when using certain text fields on the web -
Andy
On 3 Nov 2013, at 18:59, Zachary
, Zachary Kline wrote:
Hi Andy,
I haven’t noticed this issue on Mac, then. As far as I’m aware you should
be able to use the same keyboard commands as you do in other text editing.
Best,
Zack.
On Nov 3, 2013, at 11:15 AM, Andy Collins wrote:
Zack - Sorry, but I'm meaning when using a Mac. I
Jim
Restart your machine possibly, or wait for the Spotlight index to be rebuilt,
are my top two suggestions. Do any specific apps have busy problems? Speaking
for myself they’re quite rare on my Macbook pro.
A permissions repair might also be worth a try.
Best,
Zack.
On Nov 3, 2013, at 2:10 PM,
I’ve reported this one to Apple Accessibility a few days back. I’m sure it was
an oversight.
On Nov 1, 2013, at 4:43 AM, Josh Gregory joshkar...@gmail.com wrote:
My God, sounds more inaccessible than before.
Sent from my iPhone
On Nov 1, 2013, at 7:42 AM, Anne Robertson
Shannon,
You might want to look into an item called the web rotor. The command you want
is the O-u. This enables you to navigate by links, headings, or whatever, just
as in more familiar programs. With this particular case, I might also suggest
these Safari reader, command-shift-R. This
Hi Shanon,
I’m presuming you’re in the Mail preferences, Accounts section, when you try to
add another account. If you click the new account button, you’ll find radio
buttons for preconfigured types, and a final “Other Account,” button. This
should help.
Best,
Zack.
On Oct 31, 2013, at 7:31 AM,
Hi Shanon,
The reader doesn’t work on every page, sadly. It will work on most articles and
similar content, and when it does is a huge timesaver. :) It’s also available
on iOS, if you have an iPhone or similar.
About the web rotor, all I can say is keep fiddling with it. Takes some getting
used
FOr me, just using new view, cmd-option works. :)
Best,
Zack.
On Oct 31, 2013, at 10:08 AM, Chris H christopher...@gmail.com wrote:
Must be using classic view then. Will check.
E-mail Facebook and iMessage
christopher...@gmail.com
On 31/10/2013 00:21, Geoff Stephens wrote:
For me, in
Go into system preferences, there’s an App Store section. You can configure
automatic updates however you want.
Best,
Zack.
On Oct 31, 2013, at 12:08 PM, George Cham george.c...@outlook.com wrote:
When I installed mavericks , I was asked weather I’d like to have updates
download
Hi Mark,
The default way to move around numbers now is to interac with the spreadsheet
and use the VO keys, as you say. I wouldn’t call this a problem, just a
different way of doing things. Interacting as a concept is pretty important to
the Mac experience in general. If you like, I’d suggest
, at 5:06 PM, Zachary Kline zkl...@speedpost.net wrote:
Hi Mark,
The default way to move around numbers now is to interac with the
spreadsheet and use the VO keys, as you say. I wouldn’t call this a
problem, just a different way of doing things. Interacting as a concept is
pretty
Hi George,
The order of info in the New email view is fixed, and you can’t turn it off I”m
afraid.
If you want more control over such things, classic view is your friend.
Best,
Zack.
On Oct 30, 2013, at 2:39 PM, George Cham george.c...@outlook.com wrote:
When I am navigating through messages
Will,
iBOoks on Mac is a work in progress, definitely. You can get to table of
contents with cmd-t, and library with cmd-l. I’m not sure why the first release
was this way, but I’ve been assured they’re working on it.
Best,
Zack.
On Oct 30, 2013, at 4:13 PM, William Lomas
Hi,
In all likelihood you chose the correct update, and Apple’s servers were just
having a minor hiccup of some kind. :)
Best,
Zack.
On Oct 29, 2013, at 11:10 AM, Eileen Misrahi eileen.misr...@gmail.com wrote:
Hi All,
Last night I checked the App Store for my updates. I am holding off in
While I acknowledge the limitations Ann mentions are important to keep in
mind, I can’t bring myself to be unhappy with the new Pages. It’s entirely
possible that mail merge fields and date formatting will be reinstated in a
future update. I’m not as concerned about the style issue, as I
to update one item at a
time. Can you advise me if there is a method to find out this information?
Thanks in advance.
chireen
Sent from my iPhone
On Oct 29, 2013, at 11:24 AM, Zachary Kline zkl...@speedpost.net wrote:
Hi,
In all likelihood you chose the correct update, and Apple’s
Hi Brian,
Nope, I haven’t seen this. Just did a Google search and could navigate headings
with the rotor just fine. I note that I’m used to using VO-cmd-h and friends,
so I may be missing something.
Best,
Zack.
On Oct 28, 2013, at 10:19 AM, Bryan Jones openses...@me.com wrote:
Hi Folks,
For
1 - 100 of 383 matches
Mail list logo