Hi Mark,
thanks.
I have done all changes, but If I sent an email to a list,
I get an error message, because 'user unknown':
Feb 26 12:37:13 mail fetchmail[6236]: Nachricht
about-du...@www.company.de:1 von 1 wird gelesen (2783 Bytes)
(Log-Meldung unvollständig)
Feb 26 12:37:13 mail
Hi,
İ have a list of about 3 members and SMTP_MAX_RCPTS is set to 20 . i want
to give some time between every 20 post of my lists so that i can slow down the
post.can i have a chance to do this and give some time ?
Thanks,
Burcu İnci
on 2/26/09 1:25 AM, Karl O. Pinc said:
Tacking my domain name on somebody else's email address
puts it in the wrong place. Better to leave it alone.
If it's from some other domain, then it should already be fully
qualified before you get it -- that's required by the RFCs.
You should
on 2/26/09 6:48 AM, Burcu İnci said:
İ have a list of about 3 members and SMTP_MAX_RCPTS is set to 20
. i want to give some time between every 20 post of my lists so that
i can slow down the post.can i have a chance to do this and give some
time ?
Go to the FAQ Wiki at
Hi all--
I've got a tricky problem on my mailman server. Right now, I have
admin_immed_notify set to yes, but I'm not getting notifications when there
are emails to approve. I'm also not getting the once-a-day # list
moderator request(s) waiting either. Forward messages (individually) to:
So, owner = administrator(s) moderators? Can bounces be sent
only to the administrator? My list moderators don't need to get bounce
notices.
Thanks,
-Rob
On Feb 25, 2009, at 5:40 PM, Mark Sapiro wrote:
Rob wrote:
For an unknown reason, bounce messages are being sent to both the
Hi all--
Ummm... strangely, this appears to be working again. Not sure why, but I'm
happy!
george
On Wed, Feb 25, 2009 at 5:29 PM, george bannerman georgebanner...@gmail.com
wrote:
Hi all--
I've got a tricky problem on my mailman server. Right now, I have
admin_immed_notify set to yes,
I have a Mailman 2.1.9 installation on RHEL v5
I have a list with max_size_limit set to 1. However, the mails which are
more than 1KB also gets held for approval. Mailman is not rejecting the
mails which are over 1KB.
Can you please help ?
Sree
--
View this message in context:
Karl O. Pinc wrote:
There's various ways around the problem,
ways to keep postfix from re-writing the addresses.
I think the simplest would be if I could
control the address from which mailman sends
it's mail, say if mailman binds to 127.0.0.2
instead of 127.0.0.1 when it sends it's mail.
But I
Oliver Glueck wrote:
thanks.
I have done all changes, but If I sent an email to a list,
I get an error message, because 'user unknown':
Feb 26 12:37:13 mail fetchmail[6236]: Nachricht
about-du...@www.company.de:1 von 1 wird gelesen (2783 Bytes)
(Log-Meldung unvollständig)
Feb 26 12:37:13 mail
amritasysadmin wrote:
I have a list with max_size_limit set to 1. However, the mails which are
more than 1KB also gets held for approval. Mailman is not rejecting the
mails which are over 1KB.
And it's not supposed to. Messages which exceed max_message_size (not
max_size_limit) are held, not
Mark Sapiro wrote:
SMTPHOST and SMTPPORT in mm_cfg.py.
That controls where you send to, but not what address Mailman binds to when
it sends to that host/port.
--
Brad Knowles
b...@shub-internet.orgIf you like Jazz/RB guitar, check out
LinkedIn Profile: my friend
Brad Knowles wrote:
Mark Sapiro wrote:
SMTPHOST and SMTPPORT in mm_cfg.py.
That controls where you send to, but not what address Mailman binds to when
it sends to that host/port.
Right. I misread the OP. It said I think the simplest would be if I
could control the address from which mailman
On 02/26/2009 09:41:40 AM, Brad Knowles wrote:
Mark Sapiro wrote:
SMTPHOST and SMTPPORT in mm_cfg.py.
That controls where you send to, but not what address Mailman binds
to when it sends to that host/port.
As it turns out I set SMTPHOST to 127.0.0.2, and instead of
the usual smtp line
On 02/26/2009 09:52:52 AM, Mark Sapiro wrote:
However, I too am puzzled as to why there are unqualified non-local
addresses to deal with at all.
Because the whole point of this particular application
of mailman is to receive and distribute mail from
a system over which I have no control that
Mark Sapiro schrieb:
Oliver Glueck wrote:
thanks.
I have done all changes, but If I sent an email to a list,
I get an error message, because 'user unknown':
Feb 26 12:37:13 mail fetchmail[6236]: Nachricht
about-du...@www.company.de:1 von 1 wird gelesen (2783 Bytes)
(Log-Meldung
Oliver Glueck wrote:
Mark Sapiro schrieb:
It looks like fetchmail is trying to deliver to Postfix and Postfix is
replying
550 5.1.1 about-du...@localhost: Recipient address rejected: User
unknown in local recipient table
This has nothing to do with virtual maps because it is looking
Mark Sapiro schrieb:
Oliver Glueck wrote:
Mark Sapiro schrieb:
It looks like fetchmail is trying to deliver to Postfix and Postfix is
replying
550 5.1.1 about-du...@localhost: Recipient address rejected: User
unknown in local recipient table
This has nothing to do with virtual
Oliver Glueck wrote:
Mark Sapiro schrieb:
What are the Postfix log entries corresponding to the
Feb 26 12:37:13 mail fetchmail[6236]: SMTP-Fehler: 550 5.1.1
about-du...@localhost: Recipient address rejected: User unknown in
local recipient table
fetchmail entry?
/var/log/mail.err :
Oliver Glueck's first post has the right config parameter,
but it still wouldn't hurt to verify what postfix
think's it's alias maps are:
# postconf | grep ^alias_maps
alias_maps = hash:/etc/aliases
hash:/var/lib/mailman/data/aliases
Likewise, in the verify assumptions category,
George Bannerman wrote:
I've got a tricky problem on my mailman server. Right now, I have
admin_immed_notify set to yes, but I'm not getting notifications when
there
are emails to approve. I'm also not getting the once-a-day # list
moderator request(s) waiting either. Forward messages
Hi All:
Me:
Solaris 10
Postfix 2.4.6
Mailman 2.1.12rc2
Python 2.4.4
postfix-to-mailman-2.1.py
I have: (2) domain names for the same host, of the form:
namexxx.department.domain.tld (has an A and MX record)
nameyyy.department.domain.tld (has a CNAME and MX record)
What I originally
Hi, I am setting up a mailing list with mailman version 2.1.11.cp3 and I am
having some difficulty changing the html on the;
Subscribe results page
At the end of the page I want to add links to go back to a page;
a href=www.lakeshorechamberorchestra.ca/members/news.htmlBack to News/a
But
Mark McCanna wrote:
Hi, I am setting up a mailing list with mailman version 2.1.11.cp3 and I
am having some difficulty changing the html on the;
First off, you're using cPanel. See FAQ 6.11 at
http://wiki.list.org/display/DOC/Mailman+and+CPanel.
Second, Mailman scrubs all stuff that you
Savoy, Jim wrote:
Reading this reminded me that I have a similar problem. All of our lists
are set by default to be admin_immed_notify=yes, but the list owners
only
get a message when something new arrives (that is put on hold). They
never
get a daily reminder about the queued-up stuff. Is this a
On Thu, Feb 26, 2009 at 12:57:25PM -0500, Mark McCanna wrote:
Hi, I am setting up a mailing list with mailman version 2.1.11.cp3 and I am
having some difficulty changing the html on the;
Subscribe results page
At the end of the page I want to add links to go back to a page;
a
Mark McCanna wrote:
Hi, I am setting up a mailing list with mailman version 2.1.11.cp3 and I am
having some difficulty changing the html on the;
Subscribe results page
At the end of the page I want to add links to go back to a page;
a
John Jackson
Solaris 10
Postfix 2.4.6
Mailman 2.1.12rc2
Python 2.4.4
postfix-to-mailman-2.1.py
Don't use postfix-to-mailman-2.1.py. There is no need, and it just
makes your situation more complex.
I have: (2) domain names for the same host, of the form:
John Jackson wrote:
I have: (2) domain names for the same host, of the form:
namexxx.department.domain.tld (has an A and MX record)
nameyyy.department.domain.tld (has a CNAME and MX record)
First off, you can't mix CNAMEs and MX records. That is prohibited by the
RFCs, and most
I recently created a list with 20 members, but the list is not
sending out to the members.
Other lists on this server are working fine. This is mailman 2.1.9.
I stopped OutgoingRunner with SIGTERM, sent a post and posted a message
to the list, and dumped the database;
[r...@ice httpd]#
30 matches
Mail list logo