Todd wrote:
(BTW, Paul - I just looked at the General options for a list and
noticed that there is a Conceal the member's address in the section
for Default options for new members joining this list. Hehe, that
would have been much simpler than using a script to modify the list
config, I wish I'd
it, and you need to
remove the old one, create the new one, then do the aliases.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable
could find some working samples (code
samples) for an implementation like the one I described?
I'm going to need something like this myself down the road, I'll post it
when I do it if no one else offerers anything. But it may be a good while.
Paul
batched in a daily digest? (You may
choose NoMail after you join.)BRbr
input type=radio name=digest value=0 CHECKED No input type=radio
name=digest value=1 Yesbrbr
INPUT type=Submit name=email-button value=Subscribe
pp
hr ALIGN=center WIDTH=730
end --
Paul
as needed. Restart
mailman, and away you go.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail
Allan Trick wrote:
At 12:56 PM 10/7/2003, Paul Byerly wrote:
the site list is required for Mailman to start - if it's missing or lost
you must create or find it. The list is in prefix/mailman/lists and is
called mailman. If you don't have that, you need to create it. If it's
there, then some
. Or if there is a backlog of outgoing messages that
clears in a hurry you could easily go over. I don't know any easy way to
avoid this, but as I will this month be moving a very active list off Yahoo
to my server and mirroring it to Yahoo, I'd sure like to hear some ideas!
Paul
missing or lost you must create or find it. The list is
in prefix/mailman/lists and is called mailman. If you don't have that,
you need to create it. If it's there, then some alias or pointer is wrong.
Paul
--
Mailman-Users mailing list
[EMAIL
.
And I have taken it from you and added it to my collection
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives
Todd wrote:
Paul H Byerly wrote:
I'd like to be able to set a list so the default setting for
Conceal yourself from subscriber list? is Yes rather than no.
Don't see an option for this in Defaults.py.
AFAIK, you need to set DEFAULT_NEW_MEMBER_OPTIONS. To change the
default for concealing new
Paul Smith wrote:
I have some internal mailing lists that are trying to be closed (only
members can post without moderator approval).
Unfortunately, we have different email addresses for internal
vs. external mail, and our Exchange (:-/) server rewrites our addresses
for mail we send internally
I'd like to be able to set a list so the default setting for Conceal
yourself from subscriber list? is Yes rather than no. Don't see an
option for this in Defaults.py.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http
that but...)
--
---
Paul D. Smith [EMAIL PROTECTED] HASMAT--HA Software Mthds Tools
Please remain calm...I may be mad, but I am a professional. --Mad Scientist
---
These are my opinions---Nortel Networks takes no responsibility for them
HREF=%(filename)s%(subject)s
/AA NAME=%(sequence)inbsp;/A
- -I%(author)s
+I%(author)s (%(datestr)s)
/I
My formatting for archidxentry.html:
/AA NAME=%(sequence)inbsp;/A
- - I%(author)s
+ I%(author)s /Inbsp;nbsp;smallsmall(%(datestr)s)/small/small
Paul
this work? Anyone have a clue how to make it work?
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http
is increasingly likely to cause mail to be tagged as spam and it can then
be rejected, dumped or reported to a black list. I hate spam as much as
the next guy (probably more) but the over zealous and often clueless
attempts to stop it seem to be better and better at blocking legitimate,
wanted mail.
Paul
or moderator password.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users
Either way, this method uses Mailman's to do the heavy lifting. Back
everything up, watch the leading spaces, restart the gunners afterwards,
and have fun. Al the usual it works for me, it's not my fault if it blows
up your server stuff applies.
--
Paul, who only understands half of that code
with SpamAssassin.
I ran 5.2 and 5.2.1 with no problem. I do know that if I end a
subject line with a period on this version 5.2.1 it made a mess of the
headers. Since 6.0 is out, my suggestion would be to have folks
upgrade. I've only started using it, but so far so good.
Paul
to go.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org
to restart the gunners ( bin/mailmanctl restart) and send a post to
see the changes.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
it work just as I did
with Ensim? In other words, can I make it work on a server with CPanel if
I do an install that ignores CPanel.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
header and html do not work and play well
together, and the header shows up in the resulting mail, giving everyone
the admin password.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
. For an announcement list the top I want to add... option may
work better, especially if you have list personalization turned on. For a
two way list the second This message is from a mailing list... option is
better.
Paul
--
Mailman-Users mailing
At 07:09 AM 9/19/2003, you wrote:
* Paul H Byerly [EMAIL PROTECTED] [20030919 07:43]: wrote:
Follow up on my last post. I went to MailList.py and added a new
function to give me the URL with the trailing slash. Now all is good.
Paul, who is going to have to find time to actually LEARN
Todd wrote:
Paul H Byerly wrote:
Then go to listinfo.py, back it up, and pico -w. Search for the two
entries of colspan=2 and changed to colspan=3. Then search for
GetScriptURL and add the middle line in what is below:
[Link(mlist.GetScriptURL('listinfo
the new password
(presumably out-of-band).
--help / -h
Print this help message and exit.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
/private/listname not
.../mailman/private/listname/ and the links to the archives by thread,
subject etc do not work as they lack the listname in the URL. I can not
find a way to add the trailing slash to the code that generates the URL.
Any help?
Paul
Follow up on my last post. I went to MailList.py and added a new
function to give me the URL with the trailing slash. Now all is good.
Paul, who is going to have to find time to actually LEARN Python
--
Mailman-Users mailing list
[EMAIL
that replies go to the list instead of the sender?
Yes, from the General Options Admin page. Find Where are replies to
list messages directed? and set it for This list.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org
statement may crash them, I don't know. Or maybe it will work as long as
you nest them correctly. But even if it does not crash the form, it may
well not affect the text that is generated by the tags. I suppose you
could hack the code to change the tags, but that's getting pretty deep.
Paul
vbulletin? Or am I just
asking for too much?
There is a group working on an integration of Mailman and phpBB, but
they have been stuck at a private beta since March. See
http://m2f.netclectic.com/ for more.
Paul
--
Mailman-Users mailing
or may not get caught, depending on the settings you have for your
list. When I set Hide the sender of a message, replacing it with the list
address (Removes From, Sender and Reply-To fields) in the general options
to YES then mail is caught by Yahoo and HotMail.
Paul
To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
In-Reply-To: [EMAIL PROTECTED]
Reply-To: Todd [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=us-ascii; x-action=pgp-signed
MIME-Version: 1.0
Message: 11
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Paul F. Williams
After creating the mailman list under mailman 2.1-8
on a Redhat Linux 9 system,
I find that when I try to access
http://$server/mailman/admin/mailman
it reverts back to
http://$server/mailman/admin
so I cannot edit the mailman list options.
Could I be missing an entry in the mm_cfg.py
frameborder=1
error
/IFRAME
Next to play with a message count.
PaulLinux server like wigwam - no windows, no gates, apache inside.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
The order of posts shown in the author, subject and date view is NOT
the order that the post run using the next and previous links. I appears
that the next and previous always follow the thread. I assume this is a
limitation of Pipermail?
(P²-a)/(u+l) = B³/(y+e)(r-l)*y
want to live there!
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users
Anyone know of a variable I can add to archidxentry.html to get the
date of the post after the subject and author? Tried all the date
variables I have found, no joy.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http
a matching content type box. It seems the html to text conversion
can not be stopped if filtering is on. After more than an hour of testing,
reading the FAQs, searching the archives and trying Google I'm ready for
someone to make me feel dumb with an obvious answer!!
Paul
Richard Barrett wrote:
On Thursday, August 28, 2003, at 08:27 pm, Paul H Byerly wrote:
I've got ht://dig working nicely, but I get an error message each time
the nightly cron job runs:
From: [EMAIL PROTECTED] (Cron Daemon)
To: [EMAIL PROTECTED]
Subject: Cron [EMAIL PROTECTED] /usr/local
Richard Barrett wrote:
On Saturday, August 30, 2003, at 02:57 am, Paul H Byerly wrote:
and if that uid has write permissions
over the /opt/www/htdig/db directory,
drwxr-xr-x2 root mailman 4096 Aug 20 21:38 db
In my case the permissions for /opt/www/htdig/db are set to drwxrwxr-x
version of Eudora under Windows, and do not have
this problem. Either something else is happening when your reply is sent,
or something is configured wrong on the Mailman end.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http
? Kind of ironic, I've spent months working on a way to do just
this, and now I am thinking seriously about moving to a cpanel server.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
. Everything seems to run correctly. Is this
ht://dig going back to it's roots and trying to do something I have no
need for?
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
The problem I am encountering is probably web server
related. Here are the particulars.
I have a Redhat 7.2 system with
mailman 2.0.13-1
and
apache-1.3.27-1.7.2
I have another system with Redhat 9 with
mailman-2.1-8
and
httpd-2.0.40-21.3
I believe I have configured mailman on the
I rechecked the FAQ and found the following
4.17. Why are lists missing from the listinfo page?
So, after setting VIRTUAL_HOST_OVERVIEW = 0
in mm_cfg.py I can see the listings.
paulw
From: Paul F. Williams [EMAIL PROTECTED]
Precedence: list
Subject: [Mailman-Users] Why don't I see
I realize this is not a Mailman issue, but it may be causing some
Mailman systems to reject all mail. If you are using relays.osirusoft.com
it's rejecting all e-mail.
Paul, who has his mail flowing again
--
Mailman-Users mailing list
to
that I can link to for my users. By offering them some information on how
to harness the real power of htdig I will save myself a lot of hassle!
Paul, who is getting fed up with the Eudora bug that trashes headers if
a period is at the end of the subject line
into a form textarea, and it looks great - except for the PRE and /PRE
tags.
Any help appreciated.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
time loop (I hate it when that happens)
or this is the third time this has been asked. Nagging is NOT an effective
way to get an answer from people who are offering help on a volunteer basis.
Paul, off to check for croniton particles
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org
want to write a why I'm not getting my list mail
page with info on the most common problems. When I get it done I'll let
folks here know.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
though.
Well that is my long term fix. Thanks.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http
Jon Carnes wrote:
Paul, I have never seen this on a sendmail install. Maybe your problem is
a different one.
Perhaps I miss read the issue. Give that my runaway is Python I
suspect this is the case. Sorry.
I posted about my problem a while back, see
http://www.mail-archive.com
:
find /usr/local/mailman/data -name listname | wc -l /web accessible
location/www/html/mm/listnamepending
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
, but I'm in over my
head with that.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com
as well?
All are /etc/mail/access.db
Finally, what modifications (if any) have you made to Sendmail?
Other than some open relay rejection features, nothing.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org
, and I suspect I'd hear from some customers if I stop them.
Thanks for the help.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
It looks like when there is a failed delivery,
to a particular address I see 2 odd things.
1) the messages get sent to the address test-admin
which is not the list where the bad address was located
2) nowhere in the failed message does it indicate
the list where the bad address is
On the first of each month, when the mailing list
membership reminder is sent out,
it looks like when there is a failed delivery,
to a particular address I see 2 odd things.
1) the messages get sent to the address test-admin
which is not the list where the bad address was located
2) nowhere in the
Has anyone seen Mailman 2.1.2 for Redhat 7.x and/or Redhat 8.x?
I only have seen mailman-2.0.13-1.i386.rpm, and there are some new features
in 2.1.2 that would be nice to have.
Thanks,
paulw
--
Mailman-Users mailing list
[EMAIL PROTECTED]
looked in the list archives, and found similar, but not identical,
problems. I'm thinking whatever is causing this is also prevent mail
for one of the lists for getting out.
What can I do to fix this?
Paul
shad 96c / uw cs 2001
/ mac activist / fumbler / eda / headliner
Hi all,
I don't even know if this is possible, and I don't know enough about
it to run a Google search that gives me what I need to know. Is there a
way, in html, to get the contents of %(subject_html)s into a javascript
variable?
Paul
Mailman for what ever your needs are. It's your
choice.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http
swamp?
And I am still looking for confirmation that is' 22 consecutive
characters, not 22 characters.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
some spam programs! I would think an ISP that breaks this many
systems is going to lose some customers.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
.
Just posted it in case someone else had the same issue. I'm just
impressed that I was able to edit a python program ;-)
Paul Duct tape is like the Force. It has a light side and a dark
side, and it holds the universe together
of members and number of pending messages. It has an alphabet
that links to the member list for that letter, and a link to things like
the add member form, archives, and so on.
Paul, pretty good with html, but a real newbie hack with Linux
Brad Knowles wrote:
At 10:17 PM -0500 2003/07/20, Paul H Byerly wrote:
My main mail logs have this entry 11 times in one second.
Jul 18 22:30:31 svr01 sendmail[24527]: h6J3UVp24527: 7: fl=0x0,
mode=100644: size=12288
Jul 18 22:30:31 svr01 sendmail[24527]: h6J3UVp24527: SYSERR
output
with and without the -a switch. Is that a version change issue? (I'm 2.1.2).
I especially like the fact that bounce errors show up, very nice.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman
2.1.2
Redhat 7.1
Python 2.2.2
TIA, Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com
Date: Sat, 19 Jul 2003 11:32:37 -0500
From: Paul H Byerly [EMAIL PROTECTED]
Subject: [Mailman-Users] run away process - cannot flock
To: [EMAIL PROTECTED]
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=us-ascii; format=flowed
Twice now my CPU has pegged after a message
2.1.2
Redhat 7.1
Python 2.2.2
TIA, Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com
(most?) systems it must be run after
changes are made to the aliases file in order for the changes to be
registered. Check the comments at the top of your /etc/aliases file for
information.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED
via SSH the aliases were
listed there. Without these aliases your server has no way to process
mailman addresses. And of course do newaliases if needed.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman
The test message you sent to the list is from you. Are you 100% sure
that address is a subscriber to the list? You can be the list owner and
NOT be a subscriber. Check the membership list.
Paul
Dhruba Bandopadhyay wrote:
I am having the following problem. A new list has been created
is needed is a --no-mail option. But the coding is way
beyond me - sorry.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
a web
page that collects the search parameters, passes them to bin/find_member,
and outputs the results? I'm sure I can code it, but if someone has
already invented this wheel
Paul, feeling lazy tonight
--
Mailman-Users mailing list
[EMAIL
I have recently setup mailman on one of our servers
so I am still learning how to run the list server.
A few days ago I had a request for a new list.
I created the list and a New list message went out
to this new list manager.
It appears that they just deleted the message.
Is there an easy way
/missing on your server or with your
install. Any of those problems could probably be identified by the good
folks here if you gave some information.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo
user doesn't have a clue, doesn't want a
clue, and would not know a clue if it crawled up their leg and bit them, so
getting them to fix it may be a bit of a challenge. Maybe you can get one
of the more net savvy AOL users write a how to for you.
Paul, who still find AOHell the best way to get
how to achieve this?
From the admin page click Edit public HTML pages on the right side a
little above the Logout link.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ
of lists...
Thanks,
Timothy.
-Original Message-
From: Paul H Byerly [mailto:[EMAIL PROTECTED]
Sent: 01 July 2003 15:07
To: [EMAIL PROTECTED]
Subject: [Mailman-Users] Re: Templates
Timothy Arnold wrote:
The problem I am having at the moment is trying to figure out how to
edit
the main listinfo
Can someone point me to some information on the variables mailman
uses that are in the form of %(variable)s ?
Google is no help as it can not properly parse %(variable)s.
Or is someone want's to just give me a fish on this one, how can I
transfer the contents of one of these
up. Anyone?
Paul -rw-rw-rw- ... file permissions of the beast.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives
the
JavaScript to work in the created page. The %()s variable work just find,
so I need to get the users e-mail into such a variable. Any help greatly
appreciated.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman
)s
%(email_html)s
%(datestr_html)s
I am in over my head here - anyone have a crumb for me?
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin
to read. I'd love to find a way to prevent it.
I won't send the quote as it will trash this digest too. I will
privately e-mail it to anyone who wants to see it.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http
it, and I will have to send it again when they say why am I not
getting my mail. Sigh.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw
/the-generous-husband (a work in
progress).
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail
ideas?
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org
with Yahoo2mbox.
I let it run for 15 minutes to retrieve just the one message and the
debug output shows it just looping around going nowhere.
Is there some trick that I am missing ?
Paul Linux, because rebooting is for adding hardware.
--
Mailman
help would be appreciated. TIA
Thank you,
Dene Ulmschneider
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives
At 03:23 AM 6/17/2003, you wrote:
On Monday, Jun 16, 2003, at 20:48 Canada/Mountain, Paul H Byerly wrote:
After a lot of trial and error I find that it works for plain
text messages, but not for html messages. If there is any html in the
message it goes through, but the password stays
. Should it be something else?
When I do it as a header it strips it, but that option is not
workable for some who need to be able to get posts through.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman
it goes through, but the password stays with it. And of course the only
lists I want to use this on are also the only ones that use html. Sigh.
Paul
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman
. If you take a sot at it I'd like to
hear what you do.
Paul-rw-rw-rw- ... file permissions of the beast.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org
, but the
above line shows up, with the password for all to see. Not exactly what I
want.
Any way to get it to strip the first line?
Paul Linux, because rebooting is for adding hardware.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http
a
crontab job ran uvscan. Below is the output when I scanned the suspect
file.
[EMAIL PROTECTED] msgs]# uvscan
/usr/local/src/mailman-2.1.2/tests/msgs/nimda.txt
/usr/local/src/mailman-2.1.2/tests/msgs/nimda.txt
Found the Exploit-MIME.gen virus !!!
Paul
401 - 500 of 675 matches
Mail list logo
