First time here - go easy on me. Mailman was working fine on Debian
unstable for a month or so since installation, and then I started seeing the
below errors when browsing any of the mailman web pages. My lists
themselves are working - just not the webpages, and I therefore cannot reate
new
IOError: [Errno 2] No such file or directory:
'/var/lib/mailman/logs/error'
Thanks Brad. I just decided to try using apt-get remove mailman, and then
apt-get install mailman to do a reinstall, after being [fairly] reassured
that my config files would stay intact. IT WORKED PERFECTLY! I have
Newbie here - My lists are all set to be publicly viewable. However, when I
go to www.mydomain.com/mailman/listinfo, I get the page that says there are
no publicly viewable lists at that domain. However, if I go to any list's
admin page, login, and immediately logout without doing anything, and
- Original Message -
From: John Randall [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 09, 2004 12:19 AM
Subject: [Mailman-Users] public lists
Hello all,
I am having an issue with mailman with setting the lists to be public
(list name viewable when a request for lists
Also, I should know this one, but what is needed for Apache (1.3.29)
to
recognize the stuff in cgi-bin/ as executable without the .cgi
extension? I don't see anything weird in the Apache config on a
FreeBSD
ScriptAlias /mailman/ /usr/local/mailman/cgi-bin/
In case it saves someone looking,
Newbie here - Mailman working fine, but my lists only show when viewing
domain.com and not when viewing www.domain.com. My DNS is OK, and virtual
host is setup with either type of reference. (My other website stuff is
viewable with or without the www).
Where/how to indicate that either URL
I've searched the archives and FAQ. Everything I've tried in Mailman works
except I have no archives. Surfing the archive link
http://www.wa9als.com/pipermail/spamassassin/ just returns a page not found
error.
What's most likely the problem? Does the link look correct for a list named
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Saturday, September 18, 2004 3:47 PM
Subject: Re: [Mailman-Users] No Archives
John Fleming wrote:
I've searched the archives and FAQ. Everything I've tried
From the Mailman INSTALL document:
- Configure your web server to point to the Pipermail public
mailing list archives:
For example, in Apache:
Alias /pipermail/ $varprefix/archives/public/
where $varprefix is usually $prefix unless you've used the
Consider 2 virtual hosts and their listinfo pages.
www.domain1.com/mailman/listinfo shows the expected list information pages.
however, domain1.com/mailman/listinfo says that there are no publicly
advertised list at that domain.
In contrast, both www.domain2.com/mailman/listinfo and
- Original Message -
From: damien [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, September 20, 2004 11:33 AM
Subject: [Mailman-Users] List Creation
Helloz, waz wondering what is the default admin account to create a list
?? I have a newly installed Mailman and i'm trying to
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: Fred Look and Brenda Carson [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Sunday, October 10, 2004 8:44 PM
Subject: Re: [Mailman-Users] Mailman URL and listinfo
Fred Look and Brenda Carson wrote:
well at first we could
I have a list for which the Subject Prefix is not appearing. The messages are going
through, but the [Subject Prefix] is not appearing in the Subject of the messages.
I've not had this problem before, and I don't find anything pertinent in the FAQ. Is
there anything that affects this besides
I know how to mass-subscribe a bunch of email addys. Is there a way to get
the names associated with the email addys along with the email addys during
that mass subscribe so that the names don't have to be added manually later?
Thanks - John
--
I know how to mass-subscribe a bunch of email addys. Is there a way to
get
the names associated with the email addys along with the email addys
during
that mass subscribe so that the names don't have to be added manually
later?
Ok, my bad. I found the FAQ. I'll get better...
I see my public lists when using mydomain.com/mailman/listinfo, but not when
using www.mydomain.com/mailman/listinfo. I have the appropriate info in the
virtual host directive in mm_cfg.py. What else affects this? Thanks! -
John
--
I've followed the AOL members not receiving list mail thread from last
month, but I don't find any particular resolution. I've just started a new
list with 200+ members, and ALL of the AOL addys bounced with the following:
host mailin-03.mx.aol.com[64.12.138.120] said: 421-: (RLY:H1)
There is no specific answer to this problem. Your IP address (the one
list mail is coming from) is being blocked by AOL. The link in the
above error message provides some information as does FAQ article 3.42.
I don't think so, Mark. This is an announce-only list, and the sender is
non-US, I
I don't think so, Mark. This is an announce-only list, and the sender
is
non-US, I think on a dialup. Let's say the sender's IP or ISP is on the
blacklist. Even though the list mail is finally coming from my server,
couldn't the presence of his IP or ISP in the message headers be enough
couldn't the presence of his IP or ISP in the message headers be
enough
to
trigger the blacklist? - john
No.
Yes, actually.
The problem ISP is in Europe. The challenged sender is using a dialup at
this time. There are 2 probably related observations:
1. He is being blocked by a
The moderator needs to go to the admindb URL, not the admin URL, i.e
something like
http://www.example.com/mailman/admindb/list-name
Is there a way for a moderator to do membership management via the web
interface, or is this only available to the list owner? I don't see a way
via the
I'm trying to use the Handler that integrates Mailman with SpamAssassin as
described at http://www.jamesh.id.au/articles/mailman-spamassassin/ and
referenced in the Mailman FAQ. Although I'm a relative newbie, I am using a
similar handler that integrates ClamAV with Mailman successfully.
- Original Message -
From: Gerhard Killesreiter [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]
Cc: Mailman-Users@python.org
Sent: Tuesday, January 04, 2005 12:58 PM
Subject: Re: [Mailman-Users] Mailman-SpamAssassin
On Tue, 4 Jan 2005, John Fleming wrote:
I'm trying to use
Does postfix know about your mailman aliases? You can integrate the
mailman aliases file into postfix, by adding the path to this file to
the alias_maps entry:
alias_maps = hash:/etc/aliases,
hash:/var/lib/mailman/data/aliases
My Mailman works great, but I'm sure there are redundant
I haven't seen this mentioned - When I look at the Archives of a list, I get
the CORRECT message below:
No messages have been posted to this list yet, so the archives are currently
empty. You can get more information about this list. underlined link
The [albeit minor] problem is that the
It looks like you may have changed DEFAULT_URL_PATTERN in mm_cfg.py.
Does it have a trailing slash?
No, it doesn't - Should it? If so, others don't have it either, e.g. this
is how I found things:
DEFAULT_URL_PATTERN = 'http://%s/cgi-bin/mailman'
PRIVATE_ARCHIVE_URL =
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Thursday, January 27, 2005 10:57 AM
Subject: Re: [Mailman-Users] mailmanlistinfo without slash
John Fleming wrote:
I haven't seen this mentioned - When I look
John Fleming wrote:
OK, I've added the trailing slash, run fix_url.py using withlist and
restarted Mailman, but everything is the same - The link still has
listinfomailman without the needed slash. Any more ideas?
The initial pipermail index page is generated when the list is created.
So, you
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Thursday, January 27, 2005 9:22 PM
Subject: Re: [Mailman-Users] mailmanlistinfo without slash
John Fleming wrote:
It looks like you may have changed
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Thursday, January 27, 2005 11:08 PM
Subject: Re: [Mailman-Users] mailmanlistinfo without slash
John Fleming wrote:
Well, it doesn't like bin/arch as above because
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; Mark Sapiro [EMAIL PROTECTED];
mailman-users@python.org
Sent: Friday, January 28, 2005 3:00 PM
Subject: Re: [Mailman-Users] mailmanlistinfo without slash
John Fleming wrote:
- Original
Sorry, never mind. I searched the archive (instead of google) and found
the answer. I'm just going to delete the directories manually.
Please explain before I end up doing the same things... I don't see why you
should have to resort to manually deleting directories.
--
No virus found in
Could someone please explain the entries below? I understand the obvious
ones where more than 1 recipient is logged, but what do the very numerous
1-recipient entries represent? Tnx
excerpt:
Feb 01 05:00:12 2005 (1302)
[EMAIL PROTECTED] smtp for 1 recips,
completed in 0.014 seconds
Feb 01
I'm using the ClamScan.py ClamAV Mailman handler. Everything seems to work
fine except that a zombie process keeps showing up. It goes away if I
restart Mailman, but it reappears as soon as the first subsequent message
hits Mailman. However, no subsequent zombies show up. ps -ef shows that
Anyway, I think those are working, but that leads to my second
question: Is it possible to print (or see) a complete membership list,
rather than having it displayed 30 at a time on the membership page?
You can send an email to [EMAIL PROTECTED], blank subject, and
who and your password on the
Installed the patches, put the right things in mm_cfg.py:
GLOBAL_PIPELINE.insert(1, 'SpamAssassin')
SPAMASSASSIN_HOST = 'wingfoot.org'
SPAMASSASSIN_DISCARD_SCORE = 7.5
SPAMASSASSIN_HOLD_SCORE = 5.0
SPAMASSASSIN_MEMBER_BONUS = 3
And, restarted mailman. In my logs, when I post something to a test
On most domains, I can surf www.domain.com/mailman/ (with or without the
trailing slash) and www.domain.com/mailman/listinfo comes up fine. However,
for one domain only, I get the Forbidden page:
Forbidden
You don't have permission to access /mailman/ on this server.
What/where is wrong with
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 2/14/2005
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mark Sapiro wrote:
John Fleming wrote:
On most domains, I can surf www.domain.com/mailman/ (with or without the
trailing slash) and www.domain.com/mailman/listinfo comes up fine. However,
for one domain only, I get the Forbidden page:
Forbidden
You don't have permission to access /mailman
Uh, sorry for the simple question (but it will be easy to answer). In
non-digest mode, footer option - How do I get a doublequote to appear
instead of quote? Like if I wanted it to read This is a test.
Thanks!
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version:
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Friday, February 25, 2005 4:03 PM
Subject: Re: [Mailman-Users] Use of in footer
John Fleming wrote:
Uh, sorry for the simple question (but it will be easy
msg_footer=This is a test.
some other stuff
instead.
OK, I got it to work like I want. Is there a security risk to doing the
footer this way?
Many thanks!
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date:
I have a list with in the title - Let's say ab for an example. This is
causing several problems:
1. On pages like listinfo, mailman capitalizes the first letter, so it
appears as Ab, which is not what I want, but can tolerate. If I try to
make the case change only with the web interface,
- Original Message -
From: Michael Loftis [EMAIL PROTECTED]
To: mailman-users@python.org
Sent: Saturday, March 05, 2005 8:18 PM
Subject: Re: [Mailman-Users] List with in title
So my main question is - Is there a way to escape the ampersand such that
I can run withlist or arch commands
Well, it let me create the list and I could use bin/withlist commands on it
by enclosing listname in single quotes. Everything looked fine, but when I
tried my first post to the list, I got this back:
The Postfix program
SL@domain.org: Command died with status 127:
I'd stay away from an ampersand. It has a special meaning in Unix commands
(means execute the previous command in the background) and unless properly
escaped, will be taken for that special meaning every time it occurs in a
shell command.
Thanks, Larry. I didn't find anything about it in the FAQ.
Or visit the roster from the listinfo page or directly at something
like http://www.example.com/mailman/roster/listname
I'm not familiar with /roster/listname. Why I try that, I get
Error
Directors roster authentication failed.
--
No virus found in this outgoing message.
Checked by AVG
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Saturday, March 12, 2005 10:22 AM
Subject: Re: [Mailman-Users] Getting the subscriber list
John Fleming wrote:
Or visit the roster from the listinfo page
When you go to the roster from the listinfo/listname page, it goes to
the roster/listname URL. If you then go somewhere else and then back
to that URL, I'd expect it to work. Also, if I go to a list admin
page, logging in along the way, and then just change admin in the
address bar to roster and
Can I turn this off?
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives:
Can I turn this off?
Yes. Set max_num_recipients to 0 on the Privacy... Recipients
filters... page.
Thanks - I looked, but missed this. Agreed on User Education. - John
--
Mailman-Users mailing list
Mailman-Users@python.org
- Original Message -
From: Dr. Scott S. Jones [EMAIL PROTECTED]
To: mailman-users@python.org
Sent: Thursday, March 24, 2005 3:45 PM
Subject: [Mailman-Users] rules du jour
Dear list:
When I set up Mailman 2.1.5 on my Debian 3.0 system, I also set up
spamassassin, which included setting
Is it possible with mailman that I can put a field on my website, where
people can submit to the in my case newsletter???
See FAQ 4.33 at http://www.python.org/cgi-bin/faqw-mm.py?req=all#4.33
--
Mailman-Users mailing list
On Wednesday 20 April 2005 07:11 pm, R. S. wrote:
Forgive me if I seem a little dense. I would like to use mailman with a
very pretty form on my website. Is there any way to make a php or cgi form
work with mailman. In other words, i would like someone on my site to fill
out a form, and it
I REALLY need and easy way to grab the entire
subscriber list. I am admin of this list
and currently only use the web interface.
FAQ at list.org:
3.4. How do I move a list to a different server/Mailman installation.
Robin Rowe's quick tip: There's already a mass subscribe feature in the
Using email to [EMAIL PROTECTED] with who and password, I get am
email returned that says I don't have permission to retrieve the list. The
list is set to allow list members to retrieve the member list, I am the list
admin and site admin, and I am also a member of the list.
Why won't it let
If I send a 500K mp3 attachment to one of my lists, it disappears. I don't
get any moderator requests. The acceptable file size is OK per the web
interface setup.
If I send the same attachment to a regular email acct, it comes through
fine.
I assume this has something to do with the type of
It depends on how your Content filtering is currently set up. The mime
type of an mp3 should be 'audio/mpeg', but the sending MUA may give it
another type, even 'application/octet-stream'. If you allow the
latter, you might as well just turn content filtering off.
Anyway, assuming your
Anyway, assuming your filtering is currently set up with
filter_mime_types empty and some entries in pass_mime_types, you need
to add audio/mpeg and if not there already, multipart/mixed to
pass_mime_types. That should work for all correct mp3 attachments.
Actually, solved might not be quite
Anyway, assuming your filtering is currently set up with
filter_mime_types empty and some entries in pass_mime_types, you need
to add audio/mpeg and if not there already, multipart/mixed to
pass_mime_types. That should work for all correct mp3 attachments.
Actually, solved might not be quite
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Tuesday, May 17, 2005 12:11 AM
Subject: Re: [Mailman-Users] SOLVED Re: mp3 attachment
John Fleming wrote:
Another very weird thing is the the limited headers
I did a mondoarchive of my whole server to CDs today, and afterward noticed
these:
1. On the server I backed up, Mailman was not running after backup. When I
tried to restart it, I got a message about no mailman.pid and no Mailman
list. I restored /var/lib/Mailman from a previous backup,
I've been searching around the web and i found only the rmlist -a tool
to delete archives. Is there a way to delete archives without deleting
lists ?
Sure:
bin/arch --wipe listname /dev/null
Depending on how you run this, you might have to fix perms on the archive
mailboxes before you can
I wish to insert an ampersand () into the footer, but when I
use plain , it generates amp; into the footer. Should I enclose it
in some way?
1. Create a plain text file in /bin named footer. Make your footer there
like this:
On Tuesday 21 June 2005 03:59 pm, kalin mintchev wrote:
hi all...
i just upgraded to 2.1.5...
in the 2.0 version i had before in the Privacy options there was
a setting for every single message to be approved - doesn't matter if
the member was new or not. now i can't find this... i
I recently did this successfully while using two different formats.
In the Mass subscribe GUI, try either...
Format 1:
Firstname Lastname [EMAIL PROTECTED]
A little observation about this - Spacing doesn't seem to be very important
in the syntax above. I am often given a spreadsheet
On Monday 18 July 2005 09:45 am, Ken Carter wrote:
Has anyone else found what appears to be spam messages coming from your
MailMan?
Our lists are scanned by SpamAssassin before delivery. I think we have
actually had ONE spam email that would've gone out except that it was cued
for moderation
This list used to work, and now it has a problem that I have found some
threads about, but I still can't fix it - Not to mention, I don't know why
it used to work and now it doesn't! Here's the msg received back after
trying to post to the list:
The original message was received at Sat, 23
- Original Message -
From: John Fleming [EMAIL PROTECTED]
To: mailman-users@python.org
Sent: Saturday, July 23, 2005 4:19 PM
Subject: [Mailman-Users] User unknown new error
This list used to work, and now it has a problem that I have found some
threads about, but I still can't fix
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Sunday, July 24, 2005 9:33 AM
Subject: Re: [Mailman-Users] User unknown new error
John Fleming wrote:
- Original Message -
From: John Fleming [EMAIL
1. Regarding the ownership of aliases and aliases.db, mine are
reversed -
aliases - Owner = www-data, Group = list
aliases.db - Owner = list, Group - www-data
I don't know if that's how they used to be or not.
Permissions for both files is 0660.
Would you suggest that I change both to
On Wednesday 27 July 2005 09:38 am, Sintz, James wrote:
Is there a way to enable unsubscribing without requiring user confirmation?
Users are added to the list manually by an administrator, yet we do want
to allow users the ability to unsubscribe using the listname-leave@
address.
Our list
My understanding is that you cannot easily change the name of a list other
than case changes. If this is not correct, please tell me how or direct me
to the proper resource. I've googled and search the FAQ.
Thanks - John
--
Mailman-Users
Pipermail itself takes 7th edition mbox formatted mailboxes
(text files, actually) as input, and creates .html files (another
special case of text file) and other types of text files as output.
No databases here.
Am I correct then that the email addys in the archives are relatively
- Original Message -
From: Mark.A.Lombardo [EMAIL PROTECTED]
To: mailman-users@python.org
Sent: Thursday, October 20, 2005 5:35 PM
Subject: [Mailman-Users] Help
Please can you help; currently I am using the software that is supplied by
my web HOSTing company free virtual servers or
- Original Message -
From: Jon D. Slater [EMAIL PROTECTED]
To: Mailman-Users@python.org
Sent: Wednesday, November 30, 2005 5:16 PM
Subject: [Mailman-Users] one mailman, multiple server names
Hi,
My server is set up to host 2 different domain names. (For argument
I'll call them
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: Tristan Colson [EMAIL PROTECTED]; mailman-users@python.org
Sent: Tuesday, January 03, 2006 7:48 PM
Subject: Re: [Mailman-Users] Mailman page won't display in browser
(usingVPN)
Tristan Colson wrote:
When I try to invoke
How do I set up a list so it is for announcements only?
http://www.python.org/cgi-bin/faqw-mm.py?req=all
FAQ 3.11
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
On Thursday 23 February 2006 16:36, Jon D. Slater wrote:
I've been using Mailman for some time, and just recently installed
SpamAssassin on my Fedora Core 4, Linux machine.
Spam-assassin would normally be used with the MTA (i.e. exim, qmail, etc.)
and
not Mailman. Basically, you should be
Never seen this before - When visiting mailman listinfo web page, I get:
Bug in Mailman version 2.1.5
We're sorry, we hit a bug!
Please inform the webmaster for this site of this problem. Printing of
traceback and other system information has been explicitly inhibited, but
the webmaster can
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Friday, March 02, 2007 11:15 AM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
John Fleming wrote:
Never seen this before - When visiting
- Original Message -
From: [EMAIL PROTECTED]
To: mailman-users@python.org
Sent: Friday, March 02, 2007 10:04 PM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
Quoting John Fleming [EMAIL PROTECTED]:
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Friday, March 02, 2007 10:17 PM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
Mark Sapiro wrote:
Try the following shell script
#! /bin/sh
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Friday, March 02, 2007 11:11 PM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
John Fleming wrote:
1. I must be doing something wrong
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Saturday, March 03, 2007 9:43 AM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
John Fleming wrote:
Same thing as before. Here's the script
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: John Fleming [EMAIL PROTECTED]; mailman-users@python.org
Sent: Saturday, March 03, 2007 10:45 AM
Subject: Re: [Mailman-Users] Urgent newbie help - Hit a bug page
Replace the line
for list in `/var/lib/mailman/bin/list_lists
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
Try the following:
and add the line 'print n' so it becomes
mlists = []
longest = 0
for n in names:
print n
mlist = MailList.MailList(n, lock=0)
if advertised and not
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
And yes, this looks the same. One thing I thought of - are both of
these excerpts from something identified by bin/dumpdb as 'object 1'
in the file. i.e. directly below the lines
[- start pickle file -]
- start
I can't find it in the FAQ or listname-request help dialogue, but I thought
there's a way to approve held messages by replying to the notice that I have
held messages? Tnx - John
--
Mailman-Users mailing list
Mailman-Users@python.org
I have a user asking if there is a way to send to selected list subscribers?
He wants to send a message to about 100 subscribers. I don't think Mailman can
do that from the members web page. Any other ideas?
Thanks!
- John
--
Mailman-Users
Can I edit the monthly password reminder text? (I did look through the
docs, but I don't find that answer, although I'm sure it's been asked.)
Thanks - John
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.25/2450 - Release Date:
91 matches
Mail list logo
