Hi Chris,
Thanks!
What kind of an issue was it? You just had to increase the
VM_PHYSSEG_MAX definition, or was that a misdirection?
Austin
BTW, way, how long does it take for such patches to show up in either
the 4.1 or patch branch corrections lists on the web site?
Austin
On
On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote:
I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have
various problems.
I've found on previous postings that the axe and uberry driver are
causing a problem and the kernel fails to load.
What I've done
My previous message was probably a bit dense, so I'll try my best to get right
to the point.
kerberos kinit was failing, giving me the error incorrect net address
The kdc.log file indicated that the request was coming from ::1 (the IPv6
loopback,
is that right?)
After much looking, I found that
On 7/3/07, Austin Hook [EMAIL PROTECTED] wrote:
Hi Chris,
Thanks!
What kind of an issue was it? You just had to increase the
VM_PHYSSEG_MAX definition, or was that a misdirection?
Just had to increase VM_PHYSSEG_MAX.
BTW, way, how long does it take for such patches to show up in
Does anone have idea how to put certain value to a certain IO location
from operating system. Is there some kind of debug or something?
I need to read IO location 0x09030, change and then write it back.
Leon Komlosi
On Tue, Jul 03, 2007 at 09:06:29PM +0200, Leon Komlo?i wrote:
| Does anone have idea how to put certain value to a certain IO location
| from operating system. Is there some kind of debug or something?
|
| I need to read IO location 0x09030, change and then write it back.
I don't know of a
Reyk Floeter wrote:
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote:
Hi again,
My setup looks like this:
[em0, em1]-trunk0 - vlan2 - carp2
[em2, em3]-trunk1 - vlan104 - carp104
If don't use carp at all everything works fine, but when i add carp to
trunk0 and
You don't want user 1's web applications to be able to access data in user
2's web application storage space.
I will only be using mod_php. In the past, without the user shell
accounts, this has worked rather well for me in combination with the
open_base_dir directive in the
Christian Weisgerber [EMAIL PROTECTED] wrote:
As reported ad nauseum, the vpn1411 doesn't work reliably in earlier
Soekrises. Whether this still applies to the net5501 is a valid
question.
The only common piece between the 4501 and the 4801 was the ethernet chip.
Everything else was
Hi all,
Having Read about computer security, one of the parts that mostly
called up my atention were the access control mechanisms. I've found
out that the mechanism used by mostly of the Unix-like systems is DAC
(Discretionary Access Control) and as I could see OpenBSD fits in that
mechanism as
On Tue, Jul 03, 2007 at 06:26:42PM +0200, Reyk Floeter wrote:
On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote:
I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have
various problems.
I've found on previous postings that the axe and uberry driver are
Joco Salvatti wrote:
Hi all,
Having Read about computer security, one of the parts that mostly
called up my atention were the access control mechanisms. I've found
out that the mechanism used by mostly of the Unix-like systems is DAC
(Discretionary Access Control) and as I could see OpenBSD
On Tue, 3 Jul 2007 22:32:01 -0300, Joco Salvatti wrote:
Hi all,
Having Read about computer security, one of the parts that mostly
called up my atention were the access control mechanisms. I've found
out that the mechanism used by mostly of the Unix-like systems is DAC
(Discretionary Access
On 03/07/07, Per-Olov Sjvholm [EMAIL PROTECTED] wrote:
Hi Misc
I am probably missing something, but what..
sensorsd says in the syslog that the sensor is within limits even though
a sysctl -a|grep sensor shows that it is not.
Are there any known bugs? I have checked the list and cannot
Joco Salvatti wrote:
MAC is much more sophiscitated that DAC. Thus I would like to know
from you why OpenBSD does not implement this type of mechanism.
More sophisticated != better.
The longer answer is in the archives.
---
Lars Hansson
Having Read about computer security, one of the parts that mostly
called up my atention were the access control mechanisms. I've found
out that the mechanism used by mostly of the Unix-like systems is DAC
(Discretionary Access Control) and as I could see OpenBSD fits in that
mechanism as
PacSec CALL FOR PAPERS
World Security Pros To Converge on Japan
TOKYO, Japan -- To address the increasing importance of
information security in Japan, the best known figures in the
international security industry will get together with leading
Japanese researchers to share best
On Tue, Jul 03, 2007 at 03:31:49AM +0200, Martin Toft wrote:
I have run -current on my ThinkPad T41 laptop for nearly a year, and
until now it has worked really well. Recently I bought a new disk for
the machine and in connection with this I reinstalled OpenBSD using the
most recent snapshot
2007/6/28, Brian Candler [EMAIL PROTECTED]:
i'm encountering a real performance problem since a recent update :
- previous snapshots dated around 22 may was working perfectly,
launching my
session (xfce) took around 10-15sec. Launching firefox took around 5secs
- updated last week on 20
On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote:
On Thu, 28 Jun 2007, Adriaan wrote:
On a freshly installed binary snapshot netstat -an -f inet6 shows
netstat: invalid address (3) ???
thanks for the report, we can reproduce and are looking into this
-Otto
[snip]
I
On Tue, 03 Jul 2007 03:39:51 +
Douglas Maus [EMAIL PROTECTED] wrote:
Could someone help me understand IP addresses, DNS, and
Kerberos on OpenBSD?
I was getting incorrect net address when trying to kinit,
and I found that switching 2 lines in /etc/hosts
putting first
10.0.1.201
If I may extend the question a bit...
How are the chances that hibernate (to swap) will be implemented
in the (relatively near) future?
I just bought a used ThinkPad T23, it comes with XP and the BIOS
does not look like a Phoenix BIOS, so it seems hibernation needs
OS support the XP way. Have
On 7/3/07, Adriaan [EMAIL PROTECTED] wrote:
On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote:
On Thu, 28 Jun 2007, Adriaan wrote:
On a freshly installed binary snapshot netstat -an -f inet6 shows
netstat: invalid address (3) ???
thanks for the report, we can reproduce and are
I'm trying to determine PLM4's address on OpenBSD-4.1 Release on amd64.
So, i'm looking into sys/arch/amd64/amd64/locore.S.
There is a point where PML4 is set (line 519):
/*
* 3. Load %cr3 with pointer to PML4.
*/
movl%esi,%eax
movl%eax,%cr3
I
Hi,
I'm trying to set up an OpenBSD router against two switches (failover
solution), the switches have a cable between them.
em0 - connects to switch01 port 1 (switch01 addr: 10.10.1.18)
em1 - connects to switch02 port 1 (switch02 addr: 10.10.1.19)
switch 1 and 2 has a management vlan
On 2007/07/03 11:48, Fredrik Carlsson wrote:
trunk0: flags=8802 mtu 1500
vlan1: flags=8843 mtu 1500
this is strange, where is the decode of the flags?
In-Reply-To: [EMAIL PROTECTED]
ahh... perhaps your mail client ate them.
anyway, 8802 means your trunk0 is not ifconfig'd up.
On 2007/07/03 11:48, Fredrik Carlsson wrote:
trunk0: flags=8802 mtu 1500
vlan1: flags=8843 mtu 1500
this is strange, where is the decode of the flags?
In-Reply-To: [EMAIL PROTECTED]
ahh... perhaps your mail client ate them.
anyway, 8802 means your trunk0 is not ifconfig'd up.
Reading the wd man page, I assumed that flash cards were supported in
Openbsd 4.1. This particular combo of SanDisk's CompactFlash PC Card
Adapter model SDAD-38-A10 with two different SanDisk compactflash
cards generated kernel panic as soon as the compact flash cards were
inserted into a
On Tue, Jul 03, 2007 at 04:32:13PM +1000, Jonathan Gray wrote:
Include the output of 'atactl wd0' perhaps you have something like
caching turned off. Also you can't hope for similiar results if you
use different programs on both systems.
Disk I/O is the only test where I use different
On Tue, Jul 03, 2007 at 01:49:09PM +0200, Martin Toft wrote:
On Tue, Jul 03, 2007 at 04:32:13PM +1000, Jonathan Gray wrote:
Include the output of 'atactl wd0' perhaps you have something like
caching turned off. Also you can't hope for similiar results if you
use different programs on both
Hi,
I am on a MS Windows XP system behind an OpenBSD 4.0 firewall.
All outbound TCP, UDP and ICMP traffic from the LAN is let out through PF.
I am able to connect to another Fortigate IPSEC VPN Server on the
Internet using Forticlient on the same XP system but no data
communication happens
On Tuesday 03 July 2007 07:36, Siju George wrote:
Hi,
I am on a MS Windows XP system behind an OpenBSD 4.0 firewall.
All outbound TCP, UDP and ICMP traffic from the LAN is let out
through PF.
I am able to connect to another Fortigate IPSEC VPN Server on the
Internet using Forticlient on
Siju George [EMAIL PROTECTED] writes:
I tried connecting from a network that is not firewalled by OpenBSD
and the VPN connection to the same Fortigate Server is working fine
and I am able to access the internal machines.
Sounds almost like you need to pass at least one of the protocols gre
hi,
anybody can tell howto create a good redundant bgp router setup? right
now i have 2 uplinks, both announcing a full table,
and one bgp router with its own AS.
Now, the questions is how a redundant setup would look like. would it
make sence to use carp devices? or is it better
to setup some
On Tue, 3 Jul 2007, Adriaan wrote:
On 7/3/07, Adriaan [EMAIL PROTECTED] wrote:
On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote:
On Thu, 28 Jun 2007, Adriaan wrote:
On a freshly installed binary snapshot netstat -an -f inet6 shows
netstat: invalid address (3) ???
List,
I have a 4.1 GENERIC machine acting as DHCP server, serving out IP
addresses to 7 diskless client machines. Each client machine needs to
be pushed a different configuration file in order to start a process
once booted. There is a chance that any number of clients may be
replaced at
On Tue, Jul 03, 2007 at 02:45:00PM +0100, mgb wrote:
So if I defined a large pool of IP addresses in dhcpd.conf that
would avert the problem described above, however I'm struggling to
think of a solution on how would clients would request the correct
configuration file? and how could I handle
Hi again,
My setup looks like this:
[em0, em1]-trunk0 - vlan2 - carp2
[em2, em3]-trunk1 - vlan104 - carp104
If don't use carp at all everything works fine, but when i add carp to
trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff
reboot is needed.
If only one
mgb wrote:
List,
I have a 4.1 GENERIC machine acting as DHCP server, serving out IP
addresses to 7 diskless client machines. Each client machine needs to
be pushed a different configuration file in order to start a process
once booted. There is a chance that any number of clients may be
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote:
Hi again,
My setup looks like this:
[em0, em1]-trunk0 - vlan2 - carp2
[em2, em3]-trunk1 - vlan104 - carp104
If don't use carp at all everything works fine, but when i add carp to
trunk0 and trunk1 it takes a few
On Tue, Jul 03, 2007 at 09:44:09AM +0200, Raimo Niskanen wrote:
If I may extend the question a bit...
How are the chances that hibernate (to swap) will be implemented
in the (relatively near) future?
I just bought a used ThinkPad T23, it comes with XP and the BIOS
does not look like a
Hi,
we are running an OpenBSD 4.0 Firewall/VPN Cluster (CARP).
One of my collegues connects with a DrayTek 2700 Router to the Internet,
and this router is establishing an IPSec-Tunnel to our Firewall-
Cluster. The Tunnel is stable,
besides the 24-Hour disconnect. The IP of the DrayTek changes,
Hi Misc
I am probably missing something, but what..
sensorsd says in the syslog that the sensor is within limits even though
a sysctl -a|grep sensor shows that it is not.
Are there any known bugs? I have checked the list and cannot find anything
related to this... I run a Dell PE830 on
On Thu, Jun 14, 2007 at 10:22:50AM +0200, Raimo Niskanen wrote:
Hi again, sorry to bother you again but who else would know?
Can ayone make an educated guess on what has the best
possibility to work for OpenBSD 4.1:
* US Robotics USB modem
* Other USB modem (Sweex)
* ZONET ZFM5600 MODEM
On Tue, Jul 03, 2007 at 10:20:18PM +1000, Jonathan Gray wrote:
On Tue, Jul 03, 2007 at 01:49:09PM +0200, Martin Toft wrote:
Disk I/O is the only test where I use different programs (hdparm and
dd), as I couldn't find a port/package of hdparm for OpenBSD.
Still, I think the results are so
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote:
Hi again,
My setup looks like this:
[em0, em1]-trunk0 - vlan2 - carp2
[em2, em3]-trunk1 - vlan104 - carp104
If don't use carp at all everything works fine, but when i add carp to
trunk0 and trunk1 it takes a few
Bonjour,
Vous vendez votre fond de commerce ?
Vous souhaitez acquirir un fond de commerce ?
Consultez ou inscrivez gratuitement votre annonce dachat ou de vente
de fond de commerce sur www.vente-fonds-commerce.fr.
Dans lattente de votre prochaine visite,
Veuillez agrier nos sinchres
Hi folks,
Since i upgraded our firewall to 4.1, i have severe problems with the
Marvell 88E1011 Gigabit interface. netstat shows thousands of ierrs
after 15 minutes of uptime. No Problems with 4.0. Is this a known issue?
I found only one relevant posting
48 matches
Mail list logo
