On Sun, 1 Sep 2013 22:45:50 -0700, andrew fabbro wrote:
I have a Shuttle SD11G5, which is a small Celeron-based PC (1.5Ghz Celeron,
2GB RAM, a couple SATA drives).
The OpenBSD 5.3 installer consistently hangs after I enter the Netmask for
the onboard NIC.
I'm booting the 32-bit x86
On Sun, Sep 01, 2013 at 12:52:32PM -0700, Bryan Vyhmeister wrote:
Yes, I have a Synaptics touchpad and the freeze has only happened under
X as far as I know but I am pretty much always running X. Thank you.
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
Hi everyone,
I know this gets discussed a lot and I don't want to re-tread old
ground, but I am in the process of specifying firewall hardware for
10Gbit and would like to check the rules-of-thumb I am using..
We would like to reach 1 Million pps, and would like to forward at least
up-to the
On Mon, 2 Sep 2013 12:13:22 +0200, Stefan Sperling wrote:
On Sun, Sep 01, 2013 at 12:52:32PM -0700, Bryan Vyhmeister wrote:
Yes, I have a Synaptics touchpad and the freeze has only happened under
X as far as I know but I am pretty much always running X. Thank you.
pckbc0: using irq 12 for
On 2 September 2013 12:26, Andy a...@brandwatch.com wrote:
Hi everyone,
I know this gets discussed a lot and I don't want to re-tread old
ground, but I am in the process of specifying firewall hardware for
10Gbit and would like to check the rules-of-thumb I am using..
We would like to reach
Hi Mike,
Le 02/09/2013 13:21, Mike Belopuhov a écrit :
We are trying to address problems with MP networking right now,
but due to the lack of manpower the progress is slow.
What would you need to accelerate ? Developpers, testers, time, money,
hardware, something else ?
Denis
Hi everyone,
I have a strange situation on three 5.3 machines for few
days
now. After dropping what appears to be a malformed echo request, interface
goes down for 20 min. PF block policy is set to drop. Interface is connected
to
a Cisco switch, sorry no other details from our collo provider.
Greetings All,
I have a softraid device, sd3, which was created as follows:
bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0
The chunk sd2a failed. bioctl shows the RAID1 as degraded, and chunk sd2a
as OFFLINE.
In order to rebuild, I'd need to set up the new sd2. After replacing and
On Fri, Aug 30, 2013 at 08:00:50AM -0700, Bryan Vyhmeister wrote:
I'm running OpenBSD/amd64 5.4-current with GENERIC.MP from 2013/08/19
downloaded from the mirrors on a Levovo ThinkPad X1 Carbon. Both
snapshots I have tried (2013/08/25 and 2013/08/29) after the 19th have
resulted in hard
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0
The chunk sd2a failed. bioctl shows the RAID1 as degraded, and chunk sd2a
as OFFLINE.
In
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
In order to rebuild, I'd need to set up the new sd2. After replacing
and zeroing the drive, I replaced the MBR with fdisk -yi /dev/sd2,
which worked fine. Next, I copied the disklabel from sd0 to sd2, but
disklabel refused to write
On Mon, Sep 2, 2013 at 8:10 AM, Stefan Sperling s...@openbsd.org wrote:
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0
The chunk sd2a
On Mon, Sep 2, 2013 at 8:07 AM, Kenneth R Westerback kwesterb...@rogers.com
wrote:
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0
The
On Mon, Sep 02, 2013 at 08:17:27AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:10 AM, Stefan Sperling s...@openbsd.org wrote:
What commands did you run to copy the disklabel?
Oh - I did a disklabel sd0 disklabel.sd2; disklabel -R sd2 disklabel.sd2
Did that change the duid of sd2?
On Mon, Sep 2, 2013 at 8:30 AM, Stefan Sperling s...@openbsd.org wrote:
On Mon, Sep 02, 2013 at 08:17:27AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:10 AM, Stefan Sperling s...@openbsd.org
wrote:
What commands did you run to copy the disklabel?
Oh - I did a disklabel sd0
On Mon, Sep 02, 2013 at 02:30:23PM +0200, Stefan Sperling wrote:
On Mon, Sep 02, 2013 at 08:17:27AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:10 AM, Stefan Sperling s...@openbsd.org wrote:
What commands did you run to copy the disklabel?
Oh - I did a disklabel sd0 disklabel.sd2;
On Sun, Sep 01, 2013 at 10:45:50PM -0700, andrew fabbro wrote:
I have a Shuttle SD11G5, which is a small Celeron-based PC (1.5Ghz Celeron,
2GB RAM, a couple SATA drives).
The OpenBSD 5.3 installer consistently hangs after I enter the Netmask for
the onboard NIC.
I'm booting the 32-bit x86
On Mon, Sep 02, 2013 at 01:41:58PM +0200, Denis Fondras wrote:
Hi Mike,
Le 02/09/2013 13:21, Mike Belopuhov a ?crit :
We are trying to address problems with MP networking right now,
but due to the lack of manpower the progress is slow.
What would you need to accelerate ? Developpers,
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0
The chunk sd2a failed. bioctl shows the RAID1 as degraded, and chunk sd2a
as OFFLINE.
In
On Mon, Sep 2, 2013 at 8:51 AM, Bret Lambert blamb...@openbsd.org wrote:
On Mon, Sep 02, 2013 at 02:30:23PM +0200, Stefan Sperling wrote:
On Mon, Sep 02, 2013 at 08:17:27AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:10 AM, Stefan Sperling s...@openbsd.org
wrote:
What commands
On Mon, Sep 02, 2013 at 08:20:11AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:07 AM, Kenneth R Westerback kwesterb...@rogers.com
wrote:
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
If only you could 'buy' more time or make days longer.. ;)
Because I know the OpenBSD developers are working hard on this and take
it very seriously, we have decided that we are going to continue to use
OpenBSD for these new 10G firewalls because the initial load is only
going to be around
Please forgive the top posting.
If you have enough systems, can you hit the performance goals with carp
and active load balancing?
On 09/02/2013 09:53 AM, Andy wrote:
If only you could 'buy' more time or make days longer.. ;)
Because I know the OpenBSD developers are working hard on this
On Mon, Sep 02, 2013 at 08:20:11AM -0400, John Hynes wrote:
On Mon, Sep 2, 2013 at 8:07 AM, Kenneth R Westerback kwesterb...@rogers.com
wrote:
On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote:
Greetings All,
I have a softraid device, sd3, which was created as follows:
I apologize - it hadn't occurred to me that I could use a thumb drive to
transport a dmesg. Bad hacker! Lose 10 hacker points!
I tried installing without configuring network, which was successful,
however once I tried to ifconfig bge0 (ifconfig bge0 192.168.x.x. netmask
255.255.255.0 broadcast
On 08/30, Bryan Vyhmeister wrote:
I'm running OpenBSD/amd64 5.4-current with GENERIC.MP from 2013/08/19
downloaded from the mirrors on a Levovo ThinkPad X1 Carbon. Both
snapshots I have tried (2013/08/25 and 2013/08/29) after the 19th have
resulted in hard system freezes every few hours. I
On 09/02/13 08:19, John Hynes wrote:
...
The new sd2 is identical to the old, which is identical to the other
disks.
you provide ZERO proof of this, which makes me guess that you buy disks
of the same maker and same model number and assume the rest.
This is very often wrong.
Proof of that is
On Mon, Sep 2, 2013 at 12:36 PM, Nick Holland
n...@holland-consulting.netwrote:
On 09/02/13 08:19, John Hynes wrote:
...
The new sd2 is identical to the old, which is identical to the other
disks.
you provide ZERO proof of this, which makes me guess that you buy disks
of the same maker
On Mon, Sep 02, 2013 at 01:19:47PM -0400, John Hynes wrote:
I posted a dmesg earlier in the thread, that showed all three drives had
the same number of sectors as far as the kernel is concerned. After
replacing the drive with the one I assumed to be identical (a new sd2),
here's what the
andrew fabbro andrew at fabbro.org writes:
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
try acpi on this machine (boot -c and disable apm).
Dear group,
when trying different php based open source packages on a chrooted 5.2 box,
I was faced with the problem not being able to send email from their php
script. All the times I get following entry in the maillog:
w...@example.com [x.x.x.x] did not issue MAIL/EXPN/VRFY/ETRN during
http://unix.stackexchange.com/questions/88062/how-to-enable-cgi-in-openbsd
How could someone use a CGI (with a shell script) on OpenBSD? What could
the problem be?
The CGI is this:
# cat /var/www/htdocs/cgi-bin/SEARCH.cgi
printf Content-type: text/html\n\n;
printf hi
but it keeps saying:
#
On Mon, Sep 02, 2013 at 08:38:37PM +0200, Tony Berth wrote:
Dear group,
when trying different php based open source packages on a chrooted 5.2 box,
I was faced with the problem not being able to send email from their php
script. All the times I get following entry in the maillog:
On 09/02/13 14:46, Stefan Sperling wrote:
On Mon, Sep 02, 2013 at 08:38:37PM +0200, Tony Berth wrote:
Dear group,
when trying different php based open source packages on a chrooted 5.2 box,
I was faced with the problem not being able to send email from their php
script. All the times I get
On 9/2/13, obsd, cgi obsd...@postafiok.hu wrote:
http://unix.stackexchange.com/questions/88062/how-to-enable-cgi-in-openbsd
How could someone use a CGI (with a shell script) on OpenBSD? What could
the problem be?
The CGI is this:
# cat /var/www/htdocs/cgi-bin/SEARCH.cgi
printf
On 2 September 2013 21:42, obsd, cgi obsd...@postafiok.hu wrote:
http://unix.stackexchange.com/questions/88062/how-to-enable-cgi-in-openbsd
How could someone use a CGI (with a shell script) on OpenBSD? What could
the problem be?
The CGI is this:
# cat /var/www/htdocs/cgi-bin/SEARCH.cgi
On Mon, Sep 02, 2013 at 02:53:09PM -0400, Scott McEachern wrote:
The problem there is that femail-chroot requires putting a shell
into that chroot, which is something I personally avoid.
Well, whether you need a shell depends on how scripts run external
programs. E.g. PHPMailer uses popen(),
Hi, attached a little example
#!/bin/sh
echo Content-type: text/html\n\n
echo '
!DOCTYPE html PUBLIC -//W3C//DTD XHTML 1.0 Transitional//EN
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd;
html xmlns=http://www.w3.org/1999/xhtml;
head
meta http-equiv=Content-Type content=text/html;
did install both. Now, what are the settings in order to make them work?
Found following for femail:
http://rilk.com/en/doc/node/48
but these changes didn't have any effect. I still get the same error.
Thanks
On Mon, Sep 2, 2013 at 9:11 PM, Stefan Sperling s...@openbsd.org wrote:
On Mon,
On Mon, Sep 2, 2013 at 11:06 AM, Alexey E. Suslikov
alexey.susli...@gmail.com wrote:
andrew fabbro andrew at fabbro.org writes:
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
try acpi on this machine (boot -c and disable apm).
Wow, that was the
Hello,
(I'm running 5.4-current)
I would like to use multiple authentication in sshd :
2) skey
2) and passwd (as further authentication)
I tried many different settings but I can't find the correct syntax
for the AuthenticationMethod parameter.
How does AuthenticationMethod have to be
The Focusrite Scarlett 2i2 gives me an uaudio error=4 audio descriptors make no
sense
Googling, there was a patch made to Freebsd's uaudio last April,
http://freebsd.1045724.n5.nabble.com/snd-uaudio-2-0-class-support-for-24-bit-samples-with-bSubslotSize-4-td5806141.html;
but I am unable to
On Sep 2, 2013, at 3:13, Stefan Sperling s...@openbsd.org wrote:
If your system locks up over night without being used (which I've seen
happen once, too, but it's hard to reproduce), or you don't have
wsmoused running in the first place, then it's probably some other issue.
I'm not running
On Sep 2, 2013, at 9:13, Gabriel Guzman g...@guzman-nunez.com wrote:
I'm seeing the same thing on my desktop (dmesg below). Random freezes,
no debug output that I've seen in any logs, first time I noticed was
after updating to aug24 snapshot, behavior is the same with aug29th.
I think this
On Mon, Sep 02, 2013 at 09:23:46PM +0200, Tony Berth wrote:
did install both. Now, what are the settings in order to make them work?
Depends on your php application. It will probably try to run
/usr/sbin/sendmail, in which case you should ensure that exists
in the chroot. In my case I had to
I already have these settings implemented but I still get the same error!
Please note that /var/www/bin and /var/www/usr belong to the daemon group.
I don't know if that should be changed to the www one?
Where should I check in the PHP application in order to find the reason of
the problem? Also,
On Tue, Sep 03, 2013 at 12:19:14AM +0200, Tony Berth wrote:
I already have these settings implemented but I still get the same error!
Please note that /var/www/bin and /var/www/usr belong to the daemon group.
I don't know if that should be changed to the www one?
Where should I check in the
well the script does talk to google mail correctly so somehow it should
work. I think all these open source php based solutions use the same way to
send e-mails. The question is how!? Where should I look inside the php
script?
I was trying the oxwall s/w and this is generating this error. But
2 sep 2013 kl. 22:53 skrev Didier Wiroth didier.wir...@mesr.etat.lu:
Hello,
(I'm running 5.4-current)
I would like to use multiple authentication in sshd :
2) skey
2) and passwd (as further authentication)
I tried many different settings but I can't find the correct syntax
for the
On Mon, Sep 2, 2013 at 10:10 PM, andrew fabbro and...@fabbro.org wrote:
On Mon, Sep 2, 2013 at 11:06 AM, Alexey E. Suslikov
alexey.susli...@gmail.com wrote:
andrew fabbro andrew at fabbro.org writes:
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
On Mon, Sep 2, 2013 at 11:06 AM, Alexey E. Suslikov
alexey.susli...@gmail.com wrote:
andrew fabbro andrew at fabbro.org writes:
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
try acpi on this machine (boot -c and disable apm).
Wow, that
51 matches
Mail list logo