This is very much doable with DHCP one liner:
add the following to your dhcpd.conf ((!) inside the block of your
192.168.2.0/24 network)
option classless-static-routes 192.168.3.0/24 192.168.2.1;
This will install static route into all machines in 192.168.2.0/24 network.
When they will try
Yes, exactly. The fail-back never worked. All SAs would disappear
and subsequent failover to slave dropped SAs there too.
There was a story behind this from the developer
somewhere in the mail archives. A while back.
On Wednesday, December 13, 2023 at 05:55:50 p.m. GMT+9, Janne Johansson
>I'd like to add sasyncd in the mix and a 2nd router for higher availability.
Don't do it. sasyncd is known not to work properly in failover scenarios.
>Will gre over carp work?
I think you can just try out in a vm. Don't see the reason why it would not.
But perhaps there are some features that
in us-east-1 till about last week (openbsd 7.0).
It is now gone though.
On Friday, October 27, 2023 at 12:21:45 a.m. GMT+9, Antoine Jacoutot
wrote:
On Thu, Oct 26, 2023 at 12:01:06PM +, All wrote:
> OK, thanks to Mike and Antoine!
> I tried with t2 instances (current gene
recognized vmdk with out any issue and booted it. But no xnf0 interfaces
were detected.
On Thursday, October 26, 2023 at 04:47:18 p.m. GMT+9, Antoine Jacoutot
wrote:
On Tue, Oct 24, 2023 at 10:40:34PM +, All wrote:
> Hi,
>
> There was a time when we could run OpenB
Hi,
There was a time when we could run OpenBSD on AWS.
Antoine Jacoutot did a great work to make that possible.
These days, xnf0 interface is not being initialized. Xen is being
identified as Xen 4.11 (12?) but no xnf interfaces are sowing up
after boot. NetBSD has xennet0 being initiated and
mistakes, inet isn't spelled ine, etc.
A power screwup, my fault. Watching someone trying to use ed was
amusing. I had to get /home commented out since it needed manual fsck.
It was a long day and all night and morning today.
Everything is apparently working fine, but a little different than my
previous
For some reason I didn't get reply from Stuart to my inbox.
Its on the mailing lists though.
Thank you for your reply. I guess there are no solutions to run
VMs with a graphical interface yet. Unless, I run qemu and vnc
to a VM.
On Monday, July 24, 2023 at 09:21:58 p.m. GMT+9, All wrote
Hi,
I have installed libvirtd and virt-manager on 7.3.
It seems not matter what I do, libvirtd doesn't not want to start.
It always errors with no such group "root". I have changed unix_group
to wheel and tried staff also, but it seems no matter which group I specify
in .conf files
Thank you. I was still guessing if my understanding
was correct about !, !!, + and ++ being respectively same
but for prog vs host.
It is nice to have ti clarified.
On Thursday, March 9, 2023 at 06:16:04 p.m. GMT+9, Paul de Weerd
wrote:
On Thu, Mar 09, 2023 at 04:00:24AM +, All
wrote:
On Wed, Mar 08, 2023 at 03:39:07PM +0100, Noth wrote:
| On 07/03/2023 06:35, All wrote:
|
| > Hi all,
| >
| > I have a server that acts as a syslog aggregator
| > for several other servers. I was trying to see whether
| > clients can be specified on one line but I can
Hi all,
I have a server that acts as a syslog aggregator
for several other servers. I was trying to see whether
clients can be specified on one line but I can't see anything
regarding syntax for such cases in man pages.
Do we need to specify each client on the separate line?
Like:
+server1
As far as I remember, I could only get gre to work over wg.
Anything that is ethernet (like tmpr, etherip, etc) didn't work.
My wild guess is that packet overhead is becoming to big as
there is a lot of encapsulation. Also, wg interfaces do not have
same features like normal interfaces so for
t_opt_name), but I can see it is there
for a different reason.
Yes rsync is there, but I thought rdist is still being used. openbsd.amsterdam
is using it and some other folks.
Anyhow, I guess I now confirmed rdist behaviour, so all is well, thank you.
On Wednesday, December 14, 2022 at 03:08:33
. This is
useful for maintaining truly identical copies of
directories.
However, this seems to be the default anyway.
If I specify "install /tmp/" and try to copy /tmp/test.file all the files in
/tmp/
on the remote host will be wiped out and only
.
On Wednesday, October 26, 2022 at 08:43:16 p.m. GMT+9, All
wrote:
Hi,
in dhcpd.c we have:
if (is_udpsock && packet->packet_type != DHCPINFORM) {
log_info("Unable to handle a DHCP message type=%d on UDP "
"so
Considering you solved the issue with getting all IPs
for a given country correctly (and perhaps updating it sometimes):
1. Dump all IP addresses/ranges into a file (eg. blocked.ips)
2. add table file /path/to/blocked.ips
add "persist" if you want.
3. create rule to block al
Si vous ne visualisez pas ce message, suivez ce lien
Pour chaque dossier transmis par Internet, 1 ? est versi ` l'association +
Entrepreneurs du Monde ;, qui accompagne des dizaines de milliers de
micro-entreprises dans le monde par l'attribution de microcridits accordis aux
entrepreneurs les
http://www.aboutyoga.go.ro
19 matches
Mail list logo
