Following is the output of cat /etc/hostanme.mtw0
nwid network
Wpakey passwd
inet autoconf
inet6 autoconf
On 15 March 2024 23:08:14 GMT+05:30, "Peter N. M. Hansteen"
wrote:
>Please keep this on the list unless you want me to start writing invoices.
>
>On Fri, Mar 15, 2024 at 05:02:27PM +,
I have uses mtw wifi firmware.
I don't know what do you mean by multicast. I works perfectly fine with linux.
On 15 March 2024 23:10:52 GMT+05:30, Stuart Henderson
wrote:
>On 2024-03-15, Hari wrote:
>>
>> Well I read and tried to this as stated in faq=2E But it doesn't work
Well I read and tried to this as stated in faq. But it doesn't work, well ip6
does work if I trt ethernet but not with wifi.
On 15 March 2024 21:20:35 GMT+05:30, "Peter N. M. Hansteen"
wrote:
>On Fri, Mar 15, 2024 at 03:32:48PM +, Pencilgon wrote:
>> I recently installed openbsd got
There is no internet connection with mobile hotspot even though ifconfig shows
that eifi is active. There is in destination or gateway in netstate -rn. I
suspect sonething is wrong with dhcp but I can't think of any solution. Please
look into this issue.
Thanks
March 2024 21:28:05 GMT+05:30, "Zé Loff" wrote:
>
>On Sun, Mar 10, 2024 at 02:43:02PM +, Hari wrote:
>> Here is the requested output:
>>
>> lo0: flags=2008049 mtu 32768
>> index 2 priority 0 llprio 3
>> groups: lo
>>
Here is the requested output:
lo0: flags=2008049 mtu 32768
index 2 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff00
enc0: flags=0<>
index 1 priority 0 llprio 3
Hello,
I wanted to connect my openbsd system to wifi. So I downloaded and installed the
the necessary wifi firmware using wired connetion. As stated in openbsd wireless
networking faq I edited the /etc/hostname.mtw0 file and added the necessary
details according to the format. Then I started the
listened to all of the
release songs (fairly recently). They all rock. I strongly recommend a
listen if one hasn't done so already. If you are a Pink Floyd fan, you
might appreciate The Wizard of OS.
Hari
/references.
Hari
is on a clock, I got 4.3 CD working on another computer without any
problems. Everything works OOTB and we have set that up for our needs.
As and when time permits, I shall try and follow up on this network
problem. As an aside, would a different NIC solve this problem?
Hari
.
Hari
is
assigned properly during the initial configuration.
Hari
On Wed, Jul 23, 2008 at 5:05 PM, Tomas Bodzar [EMAIL PROTECTED] wrote:
Ok.So next step.
$sudo ifconfig fxp0 dhcp up
gives what?
$sudo ifconfig fxp0 dhcp up
ifconfig: dhcp: bad value
$
:-(
: config command timeout
Hari
not completely plugged in.
IIRC, it was 192.168.11.8. The DNS was properly identified as the
router (192.168.11.1).
I dont think there is a problem with the cabling. (I double checked
this with a laptop).
Hari
netmask 0xff00
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
fxp0: flags-8803UP,BROADCAST,SIMPLEX,MULTICAST mtu 1500
Rest is OK.
Apologies once again.
Hari
: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80:216:76ff:fe13:ad54%fxp0 prefixlen 64 scopeid 0x1
inet 192.168.11.8 netmask 0xff00 broadcast 192.168.11.255
After rebooting, the network is not up. Getting the error messages I
posted initially.
Hari
).
How do I check the SCB thing with the bsd.rd kernel?
Hari
the
same network problem.
Attached are the dmesgs for bsd.rd and bsd for OpenBSD4.4-latest.
Hari
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of dmesg.44.bsd.out]
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of dmesg
19 matches
Mail list logo