Re: openbsd.org down?

curl works [ntis@fpc ~]$ curl https://www.openbsd.org OpenBSD https://www.openbsd.org/;> IE works firefox does not work On Mon, Apr 13, 2020 at 8:25 AM infoomatic wrote: > not reachable for days now in Austria, Germany, Czech Republic > > > On 13.04.20 11:01,

Re: Compiling Zeek 3.0.2 returns an error at final stage

ration is > correct … > > > > -- > > Regards, > > C. L. Martinez > > > > *From: *Monah Baki > *Date: *Saturday, 7 March 2020 at 23:30 > *To: *Carlos Lopez > *Cc: *"misc@openbsd.org" > *Subject: *Re: Compiling Zeek 3.0.2 returns an

Re: Compiling Zeek 3.0.2 returns an error at final stage

Hi Carlos, Check your node.cfg, the interface section [zeek] type=standalone host=localhost interface=eth0 << might want to change it On Sat, Mar 7, 2020 at 5:01 PM Carlos Lopez wrote: > Many thanks for your answer Stuart ... Finally, I have compiled Zeek > 3.0.3-dev.3 an all goes ok

Re: OpenBSD on Soekris net4801

Have you tried boot> stty com0 38400 boot> set tty com0 On Wed, May 22, 2019 at 2:14 PM Alberto Mijares wrote: > Hi guys, > > I'm new on this list. Greetings everyone. > > Here is my case: > > I installed OpenBSD on a 4GB Flash Card by attaching the card to a > Bhyve VM as a "ahci-hd" custom

OpenBSD 6.3 syspatch

Hi all, I am running OpenBSD 6.3 in AWS, and I want to run sysptach since https://www.openbsd.org/errata63.html shows several patches exist. So on the openbsd 6.3 server I ran the following; uname -a displays OpenBSD ip-10-0-0-108.ec2.internal 6.3 GENERIC.MP#107 amd64 ip-10-0-0-108# syspatch

OpenBSD and letsencrypt in Amazon AWS

Hi All, I have a OpenBSD 6.3 server in Amazon AWS, and I am trying to install from ports letsencrypt. Install was running fine till I got a Fatal message after it was done with the patching process ===> Applying OpenBSD patch patch-setup_py Hmm... Looks like a unified diff to me... The text

Re: OpenBSd 5.9 dup-to

You have it setup in bridge mode? Thanks On Mon, May 8, 2017 at 9:01 PM Edgar Pettijohn <ed...@pettijohn-web.com> wrote: > > > On 05/08/17 17:55, Monah Baki wrote: > > Hi all, > > > > I am running OpenBSD 5.9 on a Net4801 Soekris. It's acting as my gateway

OpenBSd 5.9 dup-to

Hi all, I am running OpenBSD 5.9 on a Net4801 Soekris. It's acting as my gateway and all my internal machines on the 10.0.0.x network are able to get to the internet. My ifconfig # ifconfig lo0: flags=8049 mtu 32768 priority: 0 groups: lo

Re: Getting http to work

            >> gif >>                   > image/jpeg             >> jpeg jpg >>                   > image/png              >> png >>                   > applicat

Re: Getting http to work

I "might" not have rebooted? I really > doubt that is it but a lot on my mind lately and it could easily have been. > > Kevin Gerrard > > -Original Message- > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of > Currell Berry > Se

Re: Getting http to work

exiting, pid 96224 server exiting, pid 68259 server exiting, pid 94930 It's a fresh install so I wasn't expecting any ports listening. Even if I changed to port 8080 same issue. Thanks On Sat, Feb 25, 2017 at 6:31 PM, Currell Berry <currellbe...@gmail.com> wrote: > > Monah

Re: Getting http to work

.@gmail.com> wrote: > # rcctl - start httpd > This command should give you some details on what isn't working. > If not, you can try `# httpd -nvv` to check your config and `# httpd > -d` to run httpd directly. > > 2017-02-25 21:20 GMT+01:00 Monah Baki <monahb...@gmail.c

Re: Getting http to work

Changing to ext_addr="*" # /etc/rc.d/httpd start httpd(failed) Nothing shows up in /var/log/messages On Sat, Feb 25, 2017 at 12:00 PM, Currell Berry <currellbe...@gmail.com> wrote: > > Monah Baki writes: > >> Hi all, >> >> Installed a fresh i

Getting http to work

Hi all, Installed a fresh install of OpenBSD 6.0 on VMWare workstation and wanted to run default webserver. In the messages logs I find the following error: httpd[23792]: parent: send server: Can't assign requested address em0: flags=8843 mtu 1500

Re: Trying to newfs an old 128 compactflash

Pettijohn <ed...@pettijohn-web.com> wrote: > On 01/30/16 18:15, Monah Baki wrote: >> >> Hi all, >> >> Trying to newfs an old 128MB flashcard on my OpenBSD 5.7, so I can >> install OpenBSd on it to run on a Soekris. >> >> # dmesg | grep sd0 >

Trying to newfs an old 128 compactflash

Hi all, Trying to newfs an old 128MB flashcard on my OpenBSD 5.7, so I can install OpenBSd on it to run on a Soekris. # dmesg | grep sd0 sd0 at scsibus5 targ 1 lun 0: SCSI4 0/direct removable serial.0bda0309201209010309 sd0: 123MB, 512 bytes/sector, 251904 sectors #

Patching OpenBSD 5.7

Hi All, I upgraded my server from 5.6 to 5.7 using the bsd.rd, all was successful. OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT 2015 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (GenuineIntel 686-class) 3.60 GHz cpu0:

Re: tools for monitoring network traffic

I use Bro and Argus http://qosient.com/argus/ http://bro.org On Fri, Sep 19, 2014 at 9:10 AM, Markus Rosjat ros...@ghweb.de wrote: Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you

Squid + OpenBSD 5.4 and 5.5

Hi all, Using ./configure --prefix=/usr/local/squid --with-filedescriptors=32768 --enable-snmp --with-large-files I installed OpenBSD 5.4 on a vmware workstation and squid 3.4.5, works fine. However, OpenBSD 5.5 on both vmware workstation and on a SPARC64 T5220, I get the following error

New install

Hi all, I just installed OpenBSD 5.5 on a sparc64 $ uname -a OpenBSD test.home 5.5 GENERIC.MP#173 sparc64 I then issued the following commands: cd /usr/ export CVSROOT=anon...@anoncvs.openbsd.org:/cvs cvs -d$CVSROOT up -rOPENBSD_5_5 -Pd Couple of hours later: cvs server: Updating libexec U

Thank you thank you thank you

# dmesg console is /virtual-devices@100/console@1 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.5 (GENERIC.MP) #173: Tue Mar 4 14:47:47

DNS Proxy

Hi all, I'm running OpenBSD 5.2 with squid for a friend who owns an ISP outside the U.S and uses my OpenBSD squid proxy to access netflix. I've been told this can be also accomplished via DNS Proxy. Is it true? If yes which one do you recommend? Thanks

Re: www.openbsd.org down?

Can't access from Washington DC On Tue, Jun 25, 2013 at 6:53 AM, Nenhum_de_Nos math...@eternamente.infowrote: On Tue, June 25, 2013 06:56, Yusof Khalid - FreeBSD / OpenBSD wrote: Yeah can't access from here (Kuala Lumpur, MY) Can't access from Brazil. matheus -- We will call you

pf log question

Hi all, Using tcpdump -i pflog0 Jun 24 10:54:01.209701 rule 14/(match) pass in on tun0 Is there a way to display what's rule 14? Thank you BSD Networking, Microsoft Notworking

Re: pf log question

[74.125.46.157] and timeout after EHLO from mail3.guru.com[216.151.125.108] If I switch back to pass log quick on $external_addr everything works. I'm using OpenBSD3.9 with PPPoE. On Tue, Jun 24, 2008 at 11:06:04AM -0400, Monah Baki wrote: | Hi all, | | Using tcpdump -i pflog0 | | Jun 24 10:54

Buying 4.2 CD

Why the 4.2 CD set is missing in https://https.openbsd.org/cgi-bin/order Thank you BSD Networking, Microsoft Notworking

rdr to squid proxy with authentication

Hi all, I implemented the following rule and so far I can see that all users are accessing my proxy server Tried the following in /etc/inetd.conf 127.0.0.1:5000 stream tcp nowait nobody /usr/bin/nc nc -w \ 20 192.168.3.106 8080 rdr on $int_if proto tcp from $int_net to

RDR question

Hi all, I'm running OpenBSD on a soekris box 4.3 current. sis0=192.168.3.32 sis1=192.168.2.1 I have a proxy server IP address 192.168.3.106 I want a rule to have all users on the .2 network to go thru the proxy. Tried the following in /etc/inetd.conf 127.0.0.1:5000 stream tcp nowait

Re: RDR question

proto tcp from spamd-white to any port smtp #rdr pass on $ext_if proto tcp from any to any port smtp \ # - 127.0.0.1 port spamd anchor ftp-proxy/* # block all pass out Thanks On Apr 13, 2008, at 1:59 PM, Dorian B|ttner wrote: Monah Baki schrieb: rdr on $int_if proto tcp from $int_net

openbsd 3.9 and httpd-2.2.6

Hi all, I'm trying to install httpd-2.2.6 on my openbsd 3.9 from source. I get the following error when I run make Making all in support make[1]: Entering directory `/export/home/mbaki/httpd-2.2.6/support' make[2]: Entering directory `/export/home/mbaki/httpd-2.2.6/support'

OpenBSD 3.9 and Httpd-2.2.6 compile error

Hi All, I'm compiling httpd with the following: ./configure --prefix=/usr/local/apache2 --enable-ssl --enable-dav --enable-dav-fs --enable-vhost-alias --enable-rewrite --enable-so When I run make I get the following error: Making all in support make[1]: Entering directory

PPP problems

Hi All, I'm running PPP on OpenBSD 3.9, machine runs great for 3-4 weeks and then disconnects then I have to restart PPP for it to work. Is this normal, is there a way to keep it up indefinitely? Thanks BSD Networking, Microsoft Notworking

PF Rule

Hi all, Is there a way to write a single rule to cover these 2 rules: no nat on $ext_if inet proto tcp from 192.168.3.204 to any nat on $ext_if from 192.168.3.0/24 to any - $ext_if Thanks BSD Networking, Microsoft Notworking

NAT Question

Hi all, Yesterday I just received 8 public IP addresses from my ISP. I'm running ppp on my OpenBSD 3.9 server (DSL). My xl0 has the public IP address (67.100.x.x) provided to me by my ISP, my xl1 interface is my 192.168.3.1 Once I run /usr/sbin/ppp -ddial pppoe, my tun0 gets created If I issue a

CPAN error

Hi all, Yesterday I installed Openbsd3.9 and wanted to install Digest::SHA1 using CPAN I get an error complaining the MD5 checksum is incorrect and to delete it from /root/.cpan../../etc etc (which I did). This happens with other modules too. I can download the modules manually and run perl

Question

Hi all, I'm hoping I'm wording this correctly. Is there any software available for OpenBSD that will permit me to redirect a packet based on a certain string in the packet?. For example if someone where to telnet to my server (userid foo), server should redirect that packet based on the string

latest sendmail patch

Hi all, I'm trying to apply the latest patch for sendmail and on my make, I get the following error: cc -O2 -pipe -DSTARTTLS -DMILTER -DFAST_PID_RECYCLE -D_FFR_USE_SETLOGIN -DSM_OMIT_BOGUS_WARNINGS -DNEWDB -DMAP_REGEX -DNETINET6 -DNEEDSGETIPNODE -DSM_CONF_SHM -DNIS -DTCPWRAPPERS

OpenBSD 3.8+Mysql 5.0.16

Hi all, I'm installing mysql from source. I know this is an error that has been posted several times: # /usr/local/mysql/bin/mysql -V /usr/local/mysql/bin/mysql: can't load library '../libmysql/.libs/libmysqlclient.so.15.0' # cd /usr/local/mysql/bin # ./mysql -V # ./mysql Ver 14.12 Distrib

Re: Carp scp loosing connection

Solved it, had to switch pass in quick on $int_if all pass out quick on $int_if all to pass in quick on $int_if all keep state pass out quick on $int_if all keep state On Fri, 21 Oct 2005 16:37:54 -0400, Monah Baki wrote Sorry all it's a Soekris net4801 Thank you On Fri, 21 Oct 2005

Email problems

Hi all, Until 4 days ago, I no longer receive email on my server. I thought it was my provider (cox) since they block inbound and outbound smtp. When I send email from the outside, nothing shows up in my /var/mail/maillog, I then get an email 3 days later connection timed out with my server.

Carp scp loosing connection

Hi all, I have 2 Rasta 4801 (3.7 current) as a master and backup carp. One solaris 10 server is behind them. When I try to scp a 600MB file from 1 solaris server outside the network to the solaris server behind the net4801, I get network error: connection reset by peer error. If I halt the master

Carp scp loosing connection

Hi all, I have 2 Rasta 4801 (3.7 current) as a master and backup carp. One solaris 10 server is behind them. When I try to scp a 600MB file from 1 solaris server outside the network to the solaris server behind the net4801, I get network error: connection reset by peer error. If I halt the master

Fw: Carp scp loosing connection

Sorry all a soekris 4801 not rasta, my mistake. Hi all, I have 2 Rasta 4801 (3.7 current) as a master and backup carp. One solaris 10 server is behind them. When I try to scp a 600MB file from 1 solaris server outside the network to the solaris server behind the net4801, I get network error:

Pf rule for carp and round-robin

Hi all, I'm having problems implementing round-robin on a carp interface. The rule that I have is rdr on $ext_if proto tcp from any to $carp5 port 80 \ - { $web_srvr1, $web_srvr2 } round-robin sticky-address Does this look correct?, it works if I remove: { $web_srvr1, $web_srvr2 }

Stupid Carp question

Hi all, Implementing carp, I have 2 net4801's that seem to be synchronizing, when I do a ifconfig -a on the secondary I see carp0 on the slave becomes Master when the primary goes down. The internal machines are working fine accessing the internet and all. The pf.conf rule has the 2 rules: pass

round-robin question

Hi all, On my openbsd 3.7 bridge, I have the following rule: rdr on $int_if proto tcp from any to any port 80 - { 144.183.17.82, 144.183.17.84 } round-robin If I login to a computer it access servers one webpage, if I move to another computer, it access the seconds server webpage. However, I

Re: sguil and OpenBSD

Those are the steps that I took to install sguil on 3.7. This installation assumes server, sensor and database is on 1 host. install Openbsd 3.7 / 2GB swap 2GB /var 5GB /usr 20GB /nsm (remainding) System name: idssrvr Domain: xxx.com IP: 10.1.1.82/24 DNS Server: 68.100.16.25 GW: 10.1.1.1