Re: seeing carp interface state change for unknown reason ; cluestick hunting

2021-02-06 Thread Markus Wernig
On 2/7/21 1:38 AM, Bryan Stenson wrote: 31 RTM_IFINFO: iface status change: len 168, if# 3, name cnmac2, link: no carrier, mtu: 1500, Just grasping for something here...my next steps are to swap this unit out with the other one (to try and eliminate hardware failure of THIS unit). Any

Re: seeing carp interface state change for unknown reason ; cluestick hunting

2021-02-06 Thread Bryan Stenson
Thanks for the response. I've mounted a ramdisk at /mnt and have run "doas route -n monitor > /mnt/route.monitor" in a tmux session for a few days. Here are some details: erl3-01$ grep carp1 route.monitor | sort | uniq -c 91 RTM_ADD: Add Route: len 192, priority 146, table 0, if# 6, name

Re: seeing carp interface state change for unknown reason ; cluestick hunting

2021-02-01 Thread David Gwynne
> On 1 Feb 2021, at 6:02 pm, Bryan Stenson wrote: > > Hi all - > > I'm trying to setup a pair of ERL3 octeon routers in master/standby > mode via carp/pfsync to route traffic from my internal lan to the > internet. I've seen strange behavior wrt carp on these machines, so > in an attempt to

seeing carp interface state change for unknown reason ; cluestick hunting

2021-02-01 Thread Bryan Stenson
Hi all - I'm trying to setup a pair of ERL3 octeon routers in master/standby mode via carp/pfsync to route traffic from my internal lan to the internet. I've seen strange behavior wrt carp on these machines, so in an attempt to reduce the problem, I've removed one completely. Even with only a