Could the DP Filter not remove any points at resolution=24?
Or is there another reason why many small polygons like buildings get
mashed?
In most cases there are not even any reductions in points needed to
draw the areas.
mkgmap:
vs mapnik:
Hi Felix,
Could the DP Filter not remove any points at resolution=24?
It doesn't do anything at that res.
Or is there another reason why many small polygons like buildings get
mashed?
Yes, the reason is that the coordinates round to approx the nearest 2m.
We can't do anything about that,
Mark Burton wrote:
Hi Felix,
Could the DP Filter not remove any points at resolution=24?
It doesn't do anything at that res.
Or is there another reason why many small polygons like buildings get
mashed?
Yes, the reason is that the coordinates round to approx the nearest
Hi Mark,
On Thu, Nov 26, 2009 at 12:08:03AM +, Mark Burton wrote:
PS - Marko, please try this and see if the routing problems you were
experiencing still occur. Also, please try it on your Nuvi user and see
if their problems go away.
My Edge 705 calculates a 22.7 km route to Pasila
Felix Hartmann schrieb:
Mark Burton wrote:
Hi Felix,
Could the DP Filter not remove any points at resolution=24?
It doesn't do anything at that res.
At the moment it does nothing, but I'm not sure, if it SHOULD do
something at this level, as there may be well some points to
Hi Marko,
Thanks for the report.
My Edge 705 calculates a 22.7 km route to Pasila railway station
just fine, except that it now seems to favor smaller roads with more
intersections. What do you think, would it be worthwhile to have
some middle ground for Table A? Not one entry per arc nor
Quoting Marko Mäkelä marko.mak...@iki.fi:
The attached patch replaces the + in the names of shelter-equipped
bus/tram/train stops with * when lit=yes. When travelling by foot or
bicycle during dark time of a day, it can be helpful to find the nearest
lit shelter for a break.
Best regards,
On Thu, Nov 26, 2009 at 11:05:01AM +, char...@cferrero.net wrote:
Quoting Marko Mäkelä marko.mak...@iki.fi:
The attached patch replaces the + in the names of shelter-equipped
bus/tram/train stops with * when lit=yes. When travelling by foot or
bicycle during dark time of a day, it
hi !
is there a possiblity to get a log-report for the steps of
mkgmap-processing ???
the result is empty so i want to find the reason.
regards Jan :-)
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
On Thu, Nov 26, 2009 at 01:17:11PM +0100, Jan Tappenbeck wrote:
is there a possiblity to get a log-report for the steps of
mkgmap-processing ???
the result is empty so i want to find the reason.
I am not sure if this is what you mean, but at
http://www.polkupyoraily.net/osm/
you can find a
Hi Mark,
My Edge 705 calculates a 22.7 km route to Pasila railway station
just fine, except that it now seems to favor smaller roads with more
intersections. What do you think, would it be worthwhile to have
some middle ground for Table A? Not one entry per arc nor one entry
per way,
hi marko!
that is the think i search but.
when i used
java -Xmx1024M -ea -Dlog.config=logging.properties -jar
D:\DATEN\JAN\openstreetmap\mkgmap-GarminKartenGenerieren2009\mkgmap.jar
--style-file=D:\DATEN\JAN\openstreetmap\mkgmap_st.
i get following message:
Failed to open logging
On Thu, Nov 26, 2009 at 01:56:53PM +0100, Jan Tappenbeck wrote:
hi marko!
that is the think i search but.
when i used
java -Xmx1024M -ea -Dlog.config=logging.properties -jar
D:\DATEN\JAN\openstreetmap\mkgmap-GarminKartenGenerieren2009\mkgmap.jar
Hi list,
I wrote about this before: my first map in the mapset, 63240001.img, is
missing.
I tracked this down to revision r1363 (which is a merge from the mapset
branch) and today even further tracked it down to revision 1323 within
the (deleted) mapset branch.
However, I can't find any clues
So in my opinion the error is in the copy function of the line. If a
line contains CoordNodes, than also the copy should contain
CoordNodes. Can you point me to the code, where the lines gets
duplicated?
Whenever a routable way gets split to limit the number of points or
nodes it
Patch V8 updated to r1404.
- do not merge lines at resolution 24, as the dp filter is disabled.
With this change there should be no longer routing problems.
---
Patch V7 is now based on the R1041 (and the SizeFilter.patch)
-
Hi Johann,
I have now looked into the code and must say, I don't understand why it
works. Previous for each node was created a CoordNode. Now instead a
flag is set. I see the difference: The flag is copied, the class
obviously not.
But I didn't find the place, where this copy occurs.
On Nov 26, 2009, at 11:45, Marko Mäkelä wrote:
I translated http://www.polkupyoraily.net/osm/ into English and German.
Any suggestions for improvement are welcome, as are and any translations
for minority languages spoken in Finland: se, sv, et, ru at least.
Thanks for providing this. I'll
On Nov 26, 2009, at 1:08, Mark Burton wrote:
v2 - now does nothing more (or less) than revert commits 1228 and 1373.
I (casually) tested this patch on a Nuvi 255w today: I did not notice any harm
done to the routing at least. Since I don't have a standard set of tests, I
can't report if the
One idea for rounding at that level:
Most annoying is that rectangles that are buildings aren't rectangles anymore
after rounding. As the OSM data in itself probably isn't accurate at the 2 m
level perhaps we could do tweak the coordinates so that rectangles stay
rectangles (I know, the
As I said in a previous posting on this topic:
mb Whenever a routable way gets split to limit the number of points or
mb nodes it makes a new list of points so any changes to the points in the
mb new list will not be visible in the original list.
So, wherever you see splitWay() that's
Johann,
On Thu, 26 Nov 2009 23:53:58 +0100
Johann Gail johann.g...@gmx.de wrote:
As I said in a previous posting on this topic:
mb Whenever a routable way gets split to limit the number of points or
mb nodes it makes a new list of points so any changes to the points in the
mb new
Hi Clinton,
I (casually) tested this patch on a Nuvi 255w today: I did not notice any
harm done to the routing at least. Since I don't have a standard set of
tests, I can't report if the patch has made any improvements.
Thanks for trying it. Unless any -ve reports appear in the next day or
Hi Valentijn,
Now I'm stumped. Would anyone know what's going on here? I thought of a
race condition and removed the --max-jobs option, but that makes no
difference.
I think you're right.
It's a race between the stuff in CommandArgsReader that updates
mapname and the map making code in
One idea for rounding at that level:
Most annoying is that rectangles that are buildings aren't rectangles anymore
after rounding. As the OSM data in itself probably isn't accurate at the 2 m
level perhaps we could do tweak the coordinates so that rectangles stay
rectangles (I know, the
Hi Stéphane
Actually I'm working on a project for a little island.
When I convert the .osm file in .img, I get a little road in the .img
that doesn't appear on the .osm.
I'm in trouble... Someone has an idea ?
It might be a ghost road but we're not psychic, you need to tell us
more. How
Mark Burton wrote:
Hi Johann,
I have now looked into the code and must say, I don't understand why it
works. Previous for each node was created a CoordNode. Now instead a
flag is set. I see the difference: The flag is copied, the class
obviously not.
But I didn't find the place, where
Marko Mäkelä marko.mak...@iki.fi writes:
I think that the default style should still be maintained. There is some
value in having sensible defaults. I do see value in other styles and
hacks, such as distinguishing different types of paths by drawing multiple
lines per way or repurposing
I have made custom styles and typ for my OSM Philippine maps and would
be happy to share them and learn from others as well.
Some shots:
http://epsg4253.wordpress.com/2009/09/12/new-osm-ph-garmin-map-release-sept-200909/
v3 - hopefully, now works again after being broken by the round coords
filter.
-
v2 - based on r1402.
---
Hi Felix,
Please try the attached patch. I've tested it inasmuch that it doesn't
blow up but whether it actually does the right thing when you have a
routable and
30 matches
Mail list logo