Igor,
Você chegou a dar uma olhada nas permissões dos arquivos web?
Não tem como você colar o erro que aparece qdo clica nas opções?
O nagios.cmd existe e tem as permissões corretas?
E por último... pq não colocar o Nagios2 ? bem melhor...
[ ]'s,
Mauro Rocha
On 9/18/06, Igor da Silva Erler
Oscar,
Utilizo o nsca e também tive esse problema no início.
A solução que encontrei foi colocar no comando:
define command{ command_namenotify-by-sms command_line$USER1$/check_nrpe -H 10.0.1.1 -csendsms_service -a $CONTACTPAGER$ $HOSTNAME$ $SERVICEDESC$$SERVICESTATE$ '$SERVICEOUTPUT$'
}
Qq
Olá pessoal!
Utilizo nagios com alerta via SMS e o problema é que
ele está enviando mais de uma mensagem para um mesmo
problema de um único host.
# Generic service definition template
define service{
name generic-service
active_checks_enabled 1
passive_checks_enabled 1
parallelize_check 1
Gostaria de saber se funcionou o check_squid na sua rede?2006/9/19, Jeann Wilson [EMAIL PROTECTED]:
Funcionou2006/9/18, Jeann Wilson [EMAIL PROTECTED]:
Configuração do arquivo checkcommands.cfg# 'check_squid' command definition define command{ command_name check_squid command_line
Igor da Silva Erler wrote:
Já tinha rodado isso, e nao me retornou nenhum error
olhem ...
Nagios 1.3
Copyright (c) 1999-2004 Ethan Galstad ([EMAIL PROTECTED])
Last Modified: 10-24-2004
License: GPL
Reading configuration data...
Running pre-flight check on configuration data...
Hi,
I am currently running Nagios 2 (2.5-1~bpo.1 from backports) on a Debian
Sarge server. It has about 400 hosts and 1.500 services, with service
check latency averaging on 9.6 seconds. I am trying to update my setup,
but I am not sure if I have the best possible solution. What I need is
this:
On 9/21/06, Francois Caen [EMAIL PROTECTED]
wrote:
On 9/19/06, Thomas Slutyer [EMAIL PROTECTED] wrote: In about twelve hours I'll jump in my car and drive for eight hours to
Nürnberg, Germania for the first annual Nagios Conference
(http://www.nagiosconference.de).Wow, the schedule looks really
I've put a dhcp server on the same host as the nagios server, and it's
running but check_dhcp doesn't work from the server.
/usr/nagios/libexec/check_dhcp -i eth1 -v
DHCP socket: 3
Hardware address: 00095be058c7
DHCPDISCOVER to 255.255.255.255 port 67
DHCPDISCOVER XID: 772340585 (0x2E08FB69)
[EMAIL PROTECTED] wrote on 21/09/2006 11:19:39:
I've put a dhcp server on the same host as the nagios server, and it's
running but check_dhcp doesn't work from the server.
/usr/nagios/libexec/check_dhcp -i eth1 -v
DHCP socket: 3
Hardware address: 00095be058c7
DHCPDISCOVER to
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Hari Sekhon
Sent: Thursday, September 21, 2006 5:20 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] check_dhcp doesn't work from server
I've put a dhcp server on the
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Francois Caen
Sent: Thursday, September 21, 2006 1:24 AM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Off to the Nagios Conference
On 21 Sep, 2006, at 12:14, Einar Indridason wrote:
So... if possible, please make the presentations available to those
of us
poor souls, that can't make it to the conference.
We've been told repeatedly by the Netway staff that all presentations
will be available for download from the
Hi!
I have configured a host and the sevice, when I lost communication with that
host I must to receive a email but I dont, what am I configuring bad?
These are my logs
Sep 21 13:19:37 segacc nagios: HOST EVENT HANDLER:
prueba;DOWN;HARD;10;notify-by-email
Sep 21 13:19:37 segacc nagios:
Hi,
I'm trying to use check_cisco_ping for some hosts and
aside from the $HOSTADDRESS$ it requires the mpls
label. Passing an argument to the check_command using
!ARGn! notation doesn't work. I think it has something
to do with the ARG definition in the manual: The nth
argument passed to the
14 matches
Mail list logo
