HI
I need to set up email notification for my nagios server. However with the
following configuration email notification is sent out to a single id (
[EMAIL PROTECTED] ) of information of all host.
vi /usr/local/nagios/etc/objects/contacts.cfg
define contact{
contact_name
Hi
I have a slight issue in that the check that i am using to check the
UPS battery via SNMP is not alerting correctly. Im running Nagios 3
with Nagios plug ins and NRPE. This particular check is being run over
SNMP using the MIB for percentage of battery remaining. As can be seen
below
Hi,
I have the following problem: The notifications for a host are disabled, but
I get the host down and th host up for the host...
This does not seem to happen with all hosts...
Cheers
Klaus
--
(Nagios 3.0.3)
-
This
look in the contact and escalations sections:
http://nagios.sourceforge.net/docs/3_0/configobject.html
On Tuesday 16 September 2008 08:58:50 Agnello George wrote:
HI
I need to set up email notification for my nagios server. However with the
following configuration email notification is sent
Taylor Dondich wrote:
You could take a look at Lilac, a configuration tool I wrote. This
way you do not have to deal with the layout of the file structure, but
instead work inside an easy to use GUI. Lilac supports Nagios 3 and
full dependencies, escalations, etc. www.lilacplatform.com is
Hello again :)
I have a working Nagios instalation which alerts via E-mail and SMS at the same
time whenever a critical/warning event occur.
I was wondering how it can be done for the SMS alert to be sent 6 hours after
the mail alert (for example) just if the event is not acknowledge.
Thank
Jonathan Call wrote:
In Nagios 2.x Nagios the Obessive Compulsive Service Processor (OCSP) is
not very robust. Even with a few hundred service checks the OCSP stuff
on the distributed servers bogs down and does not send anything out.
This forced people like me to use tools like OCP_daemon.
Andreas Ericsson wrote:
K-L Reinhard wrote:
Mark, thanks a lot for this explanation and the hints. I think I'll have a
look at the event broker thing.
C coding skills are required. For a nudge to get you started, have a look
at modules/helloworld.c in the nagios source distribution.
If you
On Tue, Sep 16, 2008 at 3:46 PM, Assaf Flatto [EMAIL PROTECTED]wrote:
look in the contact and escalations sections:
http://nagios.sourceforge.net/docs/3_0/configobject.html
I was able to solve this simle query
There are cases when you want to send email notification to specific email
ID
Thanks for the reply. I'll read the documents you listed.
Meanwhile, I have a design question: What's the best way to set up a service
check to be executed on a selected few (or maybe all for that matter) nodes?
Say I need to monitor a particular process (lets call this service A) on a
number of
Hi All!
We have Nagios 3.0.1 with a number of passive services. When the go
critical, we aknowledge them and then restart Nagios or simply tell it
to reread the configuration with killall -HUP nagios, the
acknowledgements for the passive services disappear. The acknowledgement
for active service
Date: Mon, 15 Sep 2008 12:29:55 -0400 (EDT)
From: [EMAIL PROTECTED]
Subject: [Nagios-users] intermittent CGI failure
To: nagios-users@lists.sourceforge.net
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain;charset=iso-8859-1
Installed 3.0.3 from source on OpenBSD 4.3
On Sep 16, 2008, at 3:33 AM, Richard Savage wrote:
Hi
I have a slight issue in that the check that i am using to check the
UPS battery via SNMP is not alerting correctly. Im running Nagios 3
with Nagios plug ins and NRPE. This particular check is being run
over
SNMP using the MIB for
On Sep 16, 2008, at 3:37 AM, Klaus Umbach wrote:
Hi,
I have the following problem: The notifications for a host are
disabled, but I get the host down and th host up for the host...
This does not seem to happen with all hosts...
Without specific config snippets and assuming that they're
On Sep 16, 2008, at 5:16 AM, Jorge Peña wrote:
Hello again :)
I have a working Nagios instalation which alerts via E-mail and SMS
at the same time whenever a critical/warning event occur.
I was wondering how it can be done for the SMS alert to be sent 6
hours after the mail alert (for
Hello,
I am having a problem getting my Nagios 2.x installation to alert me when one
of our BlueSocket
wireless access points goes down. These are accessed via a BlueSocket
controller, which speaks
SNMP.
Nagios is issuing this command:
check_snmp -H x.x.x.x -C public -o 1.3.6.1.2.1.2.2.1.8.13
Marc
Perfect, Many thanks have made that a lot easier.
Rich
Marc Powell wrote:
On Sep 16, 2008, at 3:33 AM, Richard Savage wrote:
Hi
I have a slight issue in that the check that i am using to check the
UPS battery via SNMP is not alerting correctly. Im running Nagios 3
with Nagios
have you tried the check_snmp options for regex ?
-s, --string=STRING
Return OK state (for that OID) if STRING is an exact match
-r, --ereg=REGEX
Return OK state (for that OID) if extended regular expression REGEX matches
-R, --eregi=REGEX
Return OK state (for that OID) if
Hi,
I'm using the check_snmp_netint.pl plugin 2.21b on Nagios 3 to check
for interface errors, as per assorted suggestions I got from this
list. (Thank you all!) It's returning status and extended PNP info
nicely.
Right now, I'm using as so:
$USER1$/check_snmp_netint.pl -l $USER3$ -x $USER7$
When I run these commands at the prompt it works.
When I run them via Nagios, it displays Invalid hostname/address - $
It appears to be to do with the way they're called:
command[check_smtp]=/usr/local/nagios/libexec/check_smtp -H
$HOSTADDRESS$
On Sep 16, 2008, at 7:09 PM, Michael Hallager wrote:
When I run these commands at the prompt it works.
When I run them via Nagios, it displays “Invalid hostname/address -
$ “
It appears to be to do with the way they’re called:
command[check_smtp]=/usr/local/nagios/libexec/check_smtp -H
21 matches
Mail list logo
