I'm trying to use check_nrpe with check_smartmon but I'm getting NRPE:
Unable to read output at the Nagios Server. *All other check plugins like
check_load and check_procs work fine.
*
*I'm running the following command from my nagios server to the remote host:
*
*./check_nrpe -H
it, it will give you the same error. It just means that the script
executed but didn't respond with recognized output.
On 8/12/08, Jake Solid [EMAIL PROTECTED] wrote:
I did modified the nrpe.cfg to execute commands via sudo by adding the
following line:
*command[check_smartmon]=/usr/bin/sudo
/usr
The check_md_raid plugin which uses the mdadm program to get the status
of all the linux md arrays on the local machine provides the same
functionality as the check_smartmon plugin?
Thanks in advanced.
-
This SF.Net email
-h
mentions that -A should showdevice SMART vendor-specific Attributes and
values.
Is there a patch for this plugin?
On Wed, Jul 30, 2008 at 4:14 PM, Jake Solid [EMAIL PROTECTED] wrote:
I have tried all devices and still get the same error. This is the list of
devices I also get from
, Jake Solid wrote:
Using the devices doesnt work. Do I need a patch for thise plugin?
[root@ ~]# pvscan
PV /dev/md3 VG VolGroup01 lvm2 [232.88 GB / 45.38 GB free]
PV /dev/md1 VG VolGroup00 lvm2 [215.19 GB / 26.19 GB free]
Total: 2 [448.06 GB] / in use: 2 [448.06 GB] / in no VG: 0 [0
, 2008, at 9:25 AM, Jake Solid wrote:
Same error message. I tested using sdb1, sdb2, sdd1, sdb3 .
Here is the output:
[root@ proc]# more mdstat
Personalities : [raid1]
md2 : active raid1 sdb1[1] sda1[0]
[root@ plugins]# ./check_smartmon -d /dev/sdb1 -v 3
As indicated a few different
Hello,
I'm testing the Nagios-Plugin check_smartmon that uses smartmontools.
I'm getting a IndexError: list index out of range. I made sure all
paths were correct.
Any inputs?
This the output when running the plugin:
[root@ plugins]# ./check_smartmon -d /dev/VolGroup00/LogVol00 -v 3
Get device
Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Jake Solid
Sent: Tuesday, July 29, 2008 11:49 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] check_smartmon - IndexError: list index out of
range
Hello,
I'm testing the Nagios-Plugin
=109009MB;96760;108855;0;120951
) = 124
exit_group(2) = ?**
*
On Jan 11, 2008 11:06 AM, Dennis Jenkins [EMAIL PROTECTED]
wrote:
Jake Solid wrote:
When I use the filesystems unstead of the mount points in the nrpe.cfg
it works fine with disks 1, 2 and 3. The only disk
be without being
there.
--
Bob Sloane, University of Kansas Computer Center, Lawrence, KS, 66045
Email:[EMAIL PROTECTED] http://www.ku.edu/home/sloane Phone:(785)864-0444
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jake
Solid
Sent: Friday, January 11
)864-0444
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jake
Solid
Sent: Friday, January 11, 2008 10:22 AM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] DISK UNKNOWN - free space
When I run the command from the machine
I'm using the check_nrpe to check the space of the filesystems. The
check_nrpe its able to check the space for all the volumes except one of
them
[EMAIL PROTECTED] plugins]# ./check_nrpe -H vm.domain.com -c check_disk3
DISK UNKNOWN - free space:|
disk3 is filesystem
-xr-x 4 user1 3702 4.0K Nov 29 03:02 info
On Jan 10, 2008 11:17 AM, Nathanael Hoyle [EMAIL PROTECTED] wrote:
Jake Solid wrote:
I'm using the check_nrpe to check the space of the filesystems. The
check_nrpe its able to check the space for all the volumes except one
of them
[EMAIL
command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c
200
On Jan 10, 2008 3:14 PM, Peter Ringe [EMAIL PROTECTED] wrote:
Ha Jack,
Check/Show us the command definition in nrpe.cfg on the monitored box.
Jake Solid schrieb:
I'm using the check_nrpe to check the space
-
[EMAIL PROTECTED] On Behalf Of Jake Solid
Sent: Thursday, January 10, 2008 2:29 PM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] DISK UNKNOWN
command[check_disk3]=/usr/lib64/nagios/plugins/check_disk -w 20% -c
10% -p
/dev/mapper/VolGroup00-LogVol01
Don't you mean
[EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Jake Solid
Sent: Thursday, January 10, 2008 2:44 PM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] DISK UNKNOWN
Yes, thats correct
swing, from
a web? No he can't, he's a pig. Look out! He is a Spiderpig!!
*From:* Jake Solid [mailto:[EMAIL PROTECTED]
*Sent:* Thursday, January 10, 2008 3:58 PM
*To:* nagios-users@lists.sourceforge.net
*Subject:* Re: [Nagios-users] DISK UNKNOWN
sorry for the confusion. I usually change
%
/vservers/fred/data
On Jan 10, 2008 4:04 PM, Marc Powell [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Jake Solid
Sent: Thursday, January 10, 2008 2:58 PM
To: nagios-users@lists.sourceforge.net
Subject: Re
] *On Behalf Of *Jake Solid
*Sent:* Thursday, January 10, 2008 3:16 PM
*To:* nagios-users@lists.sourceforge.net
*Subject:* Re: [Nagios-users] DISK UNKNOWN
Yes, its the real config.
*For disk3 I have the following on nrpe.cfg*
command[check_disk3]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10
Ok, I will go ahead and start a new thred with accurate information.
On Jan 10, 2008 4:56 PM, Jake Solid [EMAIL PROTECTED] wrote:
When I make it:
command[check_disk4]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p
/vservers/fred/data
I get the same message:
DISK UNKNOWN - free
*I'm getting the following message when monitoring one of my disks from my
nagios server.*
DISK UNKNOWN - free space:|
*The following is my fstab configuration:*
/dev/VolGroup00/LogVol02 / ext3defaults1 1
/dev/md1/boot ext3
PROTECTED] wrote:
Hi,
On 18/12/2007, Jake Solid [EMAIL PROTECTED] wrote:
Thanks for your reply.
Here is how the command looks like:
command[check_disk3]=/usr/lib64/nagios/plugins/check_disk -w 20% -c
10% -p /dev/mapper/VolGroup01-infoVol00
Could possibly be the length of the device name
I'm using CentOS 4 x86 with perl-DBD-Sybase-1.07-1 installed. I tested using
DBViualiazer to make sure the username and password I was using are correct
and they are.
*I installed the plugins for NRPE and tried testing the check_sybase plugin
but I get the following error message:*
[EMAIL
I'm currently running the following version of Cent OS with Sybase 12.5:
Linux database.domain.com 2.6.14.3-vs2.0.1-rc5 #1 SMP Tue Dec 6 14:19:56 EST
2005 x86_64 x86_64 x86_64 GNU/Linu
Can anyone suggest a plugin to monitor the space of a sybase database?
Regards,
Hello,
I have a nagios server already monitoring multiple Linux servers. What will
be the best nagios plugin for monitoring the resources of a Windows XP
machine that its exposed on the Internet?
Thanks in advanced,
-
This
I get the following messages on my nagios client when I run the check_nrpe
command from the nagios server.
Nagios Client Log Messages:
17:50:45 vhost6 xinetd[16884]: START: nrpe pid=16889 from=128.121.34.19 Nov
1
17:50:45 vhost6 xinetd[16889]: warning: cannot open /etc/hosts.allow:
Permission
Everytime I restart nagios the permission for /var/log/nagios/rw/nagios.cmd
change to 660 and if i try to acknowledge a warning I get the following
message:
Error: Could not open command file '/var/log/nagios/rw/nagios.cmd' for
update!
The permissions on the external command file and/or
I got this error message:
* Nagios 2.9 *
Notification Type: PROBLEM
Service: Disk3 Usage
Host: host1.domain.pst
Address: 1.2.3.4
State: CRITICAL
Date/Time: Thu Jul 19 09:03:13 EDT 2007
Additional Info:
CHECK_NRPE: Socket timeout after 10 seconds.
When I checked the disk space of
I use the NRPE deamon my Nagios server to monitor a remote mysql database.
I have the following entry in the nrpe.cfg of my remote server that runs
mysql:
command[check_mysql]=/usr/lib64/nagios/plugins/check_mysql -d my_database
-u root -p mypassword
It connects properly BUT Is there a way
Hello,
I'm using CentOS4 x86_64 and I'm having trouble finding a web site where I
can obtain the perl-DBD-Sybase x86_64 RPM. I need this in order to use the
check_sybase module.
Can any one provide me with a location?
Thanks,
30 matches
Mail list logo
