atlantis:~# /usr/local/nagios/libexec/check_disk -w 20% -c 10% -p / -p
/drbd/
DISK OK - free space: / 796 MB (23% inode=69%); /drbd 9094 MB (94%
inode=96%);| /=2575MB;2840;3195;0;3551 /drbd=482MB;8071;9080;0;10089
This is the configuration that I have in
/usr/local/nagios/etc/nrpe.cfg:
Hi all!
I am observing the following output on one of my virtual machines:
atlantis:~# /usr/local/nagios/libexec/check_disk -w 20% -c 10% -p / -p /drbd/
DISK OK - free space: / 796 MB (23% inode=69%); /drbd 9094 MB (94% inode=96%);|
/=2575MB;2840;3195;0;3551 /drbd=482MB;8071;9080;0;10089
I would like to know if the is a way to show more of the status message when a
service goes critical. This would be helpful when email is sent out giving more
information of the error.
Thanks,
Ed
--
Master HTML5, CSS3,
Has anyone had success porting the multi-line patch to NRPE 2.14?
Specifically:
https://dev.icinga.org/attachments/113/nrpe_multiline.patch
I had success in 2.12, and 2.13, but 2.14 seems to break with the same
patch content. 2.14 seems to include some rather critical patches, so
I'd like to
On 14 Jul 2011, Mark Nipper wrote:
$ check_snmp -H 172.16.74.130 -P 1 -C public -o
.1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 20 -c 205000
SNMP WARNING - *204000* | iso.3.6.1.4.1.318.1.1.1.2.2.3.0=204000
To answer my own stupid question, the obvious form should
look something like:
---
$
On 31 Mar 2011, cas...@activenetwerx.com wrote:
Well, I'm using 1.4.15 from rpmforge on rhel and it works, what can I say:)
I'm using the EPEL version of the same packages and it's
not working in any way that I can divine. I ran across this
post:
---
I'm running a command like:
./check_snmp -H 1.2.3.4 -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 15 -c 5 -l
'Runtime Remaining' -u 'Minutes'
on an APC UPS monitoring card, which outputs in seconds like:
SNMP CRITICAL - Runtime Remaining *132000* Minutes | Runtime
Remaining=132000
which is 22 minutes.
./check_snmp -H 1.2.3.4 -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 15 -c 5 -l
'Runtime Remaining' -u 'Minutes'
on an APC UPS monitoring card, which outputs in seconds like:
SNMP CRITICAL - Runtime Remaining *132000* Minutes | Runtime
Remaining=132000
which is 22 minutes. If I divide the output by
./check_snmp -H 1.2.3.4 -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 15 -c 5
-l
'Runtime Remaining' -u 'Minutes'
SNMP CRITICAL - Runtime Remaining *132000* Minutes | Runtime
Remaining=132000
which is 22 minutes.
What version of check_snmp? Mine is current and yields expected data.
jlc
packages listed
./check_snmp -H 1.2.3.4 -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 15 -c 5
-l
'Runtime Remaining' -u 'Minutes'
SNMP CRITICAL - Runtime Remaining *132000* Minutes | Runtime
Remaining=132000
which is 22 minutes.
What version of check_snmp? Mine is current and yields expected data.
jlc
packages listed
check_snmp 1.4.15
Well, I'm using 1.4.15 from rpmforge on rhel and it works, what can I say:)
--
Create and publish websites with WebMatrix
Use the most popular FREE web apps or write code yourself;
WebMatrix provides
Hi everybody,
On Thu, Nov 25, 2010 at 12:04 AM, Stuart Browne
stuart.bro...@ausregistry.com.au wrote:
-Original Message-
From: Alexander Haas [mailto:a...@geloet.de]
Subject: [Nagios-users] No output returned from plugin
Hi list,
it's me again :)
I wrote a plug
Perhaps you'd like to run the plugin (as nagios) when it is erroring
and show us the output?
I was just about to ask the same question, when this thread appeared. I
have exactly the same problem. In my case it is a Python script. The
output is fine for the OK state, but missing for other
Hi list,
it's me again :)
I wrote a plug-in which does work great. It works from the shell as
root, from the shell as nagios and from nagios executed as plug-in.
The only problem is when there is an error returned. It does not work
when i execute it from nagios as a plug-in and there is an
-Original Message-
From: Alexander Haas [mailto:a...@geloet.de]
Subject: [Nagios-users] No output returned from plugin
Hi list,
it's me again :)
I wrote a plug-in which does work great. It works from the shell as
root, from the shell as nagios and from nagios executed as plug
-
From: Alexander Haas [mailto:a...@geloet.de]
Subject: [Nagios-users] No output returned from plugin
Hi list,
it's me again :)
I wrote a plug-in which does work great. It works from the shell as
root, from the shell as nagios and from nagios executed as plug-in.
The only problem is when
-Original Message-
From: Alexander Haas [mailto:a...@geloet.de]
Subject: Re: [Nagios-users] No output returned from plugin
Hi Stuart,
you got me on that one :)
The output did in fact contain a empty new line. I did not pay very much
attention to this fact because my own error
I recently upgraded my Ubuntu OS (8.04 10.04) and Nagios from 3.0 to 3.1.2,
and recently I ran into an issue where the data for $SERVICEOUTPUT$ is never
included in my email notification.
It is defined properly in the notification.cfg file as per below:
define command{
command_name
disregard my eyes are working again
On Tue, 24 Aug 2010 09:57:56 -0700, Mirza Dedic mi...@oppy.com wrote:
I recently upgraded my Ubuntu OS (8.04 10.04) and Nagios from 3.0 to
3.1.2, and recently I ran into an issue where the data for
$SERVICEOUTPUT$ is never included in my email
might it be the double $$ ?
Additional Info:nn$SERVICEOUTPUT$
On Tue, 24 Aug 2010 09:57:56 -0700, Mirza Dedic mi...@oppy.com wrote:
I recently upgraded my Ubuntu OS (8.04 10.04) and Nagios from 3.0 to
3.1.2, and recently I ran into an issue where the data for
$SERVICEOUTPUT$ is never
Try Replacing:
Info:\n\n$SERVICEOUTPUT$
To:
*Info:\n\n $SERVICEOUTPUT$*
Notice the space between \n
Regards,
Justin Dorfman
Mahalo.com Inc. Jr. Systems Engineer
@jdorfman http://www.twitter.com/jdorfman |
@MahaloSysopshttp://twitter.com/MahaloSysops| Blog:
http://bit.ly/aNiWSk
On Tue,
On Aug 24, 2010, at 3:40 PM, Mirza Dedic wrote:
The strange thing is..
I replaced “/usr/bin/printf %b * Nagios *\”
With “/bin/echo –e Nagios *” and now my alerts include the missing
$SERVICEOUTPUT$ information that was not there previously.
I wonder why printf was
This may be stretching nagios beyond its designed intention but...
I'm writing a plugin that could produce many many lines of output.
Since this obviously wont fit on a status page, what I'd like to do
is if the output is not exit-status=0, produce a webpage and in the
status information field of
On Jan 6, 2010, at 11:23 AM, dave stern - e-mail.pluribus.unum wrote:
This may be stretching nagios beyond its designed intention but...
I'm writing a plugin that could produce many many lines of output.
Since this obviously wont fit on a status page, what I'd like to do
is if the output
All,
I want to show the result of check_snmp in a certain way. For example if
I am doing a nominal current check on Liebert ups, the snmp query will
return 506 as result. However this actauly means 50.6 amp. Is there any
way to control the output on check_snmp plugin. I am aware of the -u
On Apr 22, 2009, at 8:46 AM, shadih rahman wrote:
All,
I want to show the result of check_snmp in a certain way. For
example if I am doing a nominal current check on Liebert ups, the
snmp query will return 506 as result. However this actauly means
50.6 amp. Is there any way to
Please always respond on list --
On Apr 22, 2009, at 10:18 AM, shadih rahman wrote:
Marc,
Can you please give me some direction for the wrapper script.
Do you mean to capture the output and then do some type search and
replace on the string?
Yes, exactly. You'll also need to
I am using the latest version of Nagios. I am doing most of my checks
using NRPE and I noticed that when it e-mails or pages me about an
alert some of the information from the error appears to be getting cut
off, is there a way to make it so that it e-mails me the entire
message and not
-Original Message-
From: Devin Atencio [mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2008 12:20 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Increase output from nagios alert e-mails/pages?
I am using the latest version of Nagios. I am doing most of my
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Devin Atencio wrote:
I am using the latest version of Nagios. I am doing most of my checks
using NRPE and I noticed that when it e-mails or pages me about an
alert some of the information from the error appears to be getting cut
off, is
) then
wscript.echo numOfFiles Warning
wscript.quit(1)
Thank you
-Original Message-
From: Jon Angliss [mailto:[EMAIL PROTECTED]
Sent: Friday, September 26, 2008 8:08 PM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] (No output returned from plugin
numOfFiles Warning
wscript.quit(1)
Thank you
-Original Message-
From: Jon Angliss [mailto:[EMAIL PROTECTED]
Sent: Friday, September 26, 2008 8:08 PM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] (No output returned from plugin)
-BEGIN PGP SIGNED
Hi,
I am running nagios 2.5 and monitoring a windows 2003 server using
NSclient++ 0.2.7. I have wrote a VBS script and defined it in NSC.ini
as
[NRPE]
checkIMMailDropFileCountNagios= cscript //NoLogo
c:\nsclientpp\scripts\IMMailDrop_FileCount_Nagios.vbs
The script takes a value,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 26 Sep 2008 14:02:17 -0400, Matt Rivet [EMAIL PROTECTED]
24.com wrote:
Hi,
I am running nagios 2.5 and monitoring a windows 2003 server using
NSclient++ 0.2.7. I have wrote a VBS script and defined it in NSC.ini
as
[NRPE]
I have a new command which I have implemented as a Nagios plugin.
Running the command as user nagios on the client gives the correct
output (currently the string : test ()) and return code 2 which is
what I require.
Running the command /usr/bin/nagios/plugins/check_nrpe -H CLIENT -t 30
-c COMMAND
Marc Powell wrote:
The plugin output text is completely arbitrary. Nagios only really cares
about the exit code and that there's only one line of plugin output,
whatever it is
Yes quite right, but standardization of output is nice for coherence and
to give a more professional unified feel.
Do
On Feb 27, 2008, at 6:58 AM, [EMAIL PROTECTED] wrote:
My $0.02:
plug-in output isn't completely arbitrary if you plan on processing
performance data.
Sure, and there are other caveats as well but they weren't germane to
the original context that I replied to.
considering that a single
* [EMAIL PROTECTED] [2008-02-27 07:58]:
I don't think printing the servicename would be helpful. The
servicename is already available in both the web and notification
output too.
I agree, see the thread I started on this topic some time ago in
nagiosplug-devel@:
On Jan 9, 2008, at 11:48 AM, mark redding wrote:
Hi Eric,
On 09/01/2008, Eric F Crist [EMAIL PROTECTED] wrote:
Hey folks,
I've got a few plugins I've written and I'm trying to clean up/expand
the output of these for better perfdata. Can you tell me if the
following output is correct?
On 09/01/2008, Eric F Crist [EMAIL PROTECTED] wrote:
I've got a few plugins I've written and I'm trying to clean up/expand
the output of these for better perfdata. Can you tell me if the
following output is correct?
This should be interpreted as, current temp is 84.2F, warning 54 and
86,
Ok, this is a much more specific version of an earlier question.
echo $RESULT | awk '{printf $1/8/100}'
output = 247.302
echo $RESULT | awk '{printf %.f '$1/8/100'}'
output = 0
I suspect this is why Nagios is returning a 0 in the results when it
runs this script:
#
I'm using this script:
#
#!/bin/bash
RESULT=`./check_nt -H adr01 -p 1248 -v COUNTER -l
\Process(EvDRServer)\Virtual Bytes -w 1500 -c 2000`
CALCULATED=`echo $RESULT | awk '{print $1/8/100 MB}'`
echo $CALCULATED
exit 0
#
To parse the output of the check_nt COUNTER
Hello,
All tests with check_nrpe are giving a Crititcal Connection refused or
timed out result if the target host is down. Is it possible to get an
Unknown result is check_nrpe is called with the -c para but no
connection could be made (the remote check is never performed).
If nrped itself is
Lennard Bakker wrote:
Hello,
All tests with check_nrpe are giving a Crititcal Connection refused or
timed out result if the target host is down. Is it possible to get an
Unknown result is check_nrpe is called with the -c para but no
connection could be made (the remote check is never
I have downloaded and compiled the source code.
it is working on /usr/lib/nagios/plugin, but not in other directories,
Here is the message that I see on nagios screen:
Critical : (Return code of 126 is out of bounds - plugin may be
missing)
is there any way to set up another directory for
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Nagios
Sent: Thursday, July 19, 2007 7:30 AM
To: Marc Powell
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] check_http output
Hello Marc,
I have downloaded
Hello Marc,
I have full path on commands.cfg file,
any idea why I can not run that command from out side of
/usr/lib/nagios/plugin ?
even I changed the ownership of that command to nagios, but still no luck.
Thanks
-
-Original Message-
From: Nagios [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 19, 2007 1:31 PM
To: Marc Powell
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] check_http output
Hello Marc,
I have full path on commands.cfg file,
any idea why I can not run
Hello
is there any way to change check_http plugin output .
here is my output :
HTTP OK HTTP/1.1 200 OK - 918 bytes in 0.012 seconds
but I want to have different output based on service names.
like : host_name: HTTP OK HTTP/1.1 200 OK - 918 bytes in 0.012 seconds
check_snmp does this but not
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Nagios
Sent: Wednesday, July 18, 2007 2:18 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] check_http output
Hello
is there any way to change check_http plugin
Hi All,
I am running Nagios 2.6 on debian-etch and i use the
check_snmp_storage.pl-plugin from http://nagios.manubulon.com/ to
monitor the disk-usage. For trending i use pnp. The plugin works fine
except for one server. I monitor all mountpoints in one check and the
problem is that the
I downloaded check_ser plugins for checking SER. When I try to run it
in terminal, it is successful though there's no output. Its just goes
back to prompt. When I miss some of the parametes, it shows an error so
I concluded that if it goes back to prompt means no error.
But when I check the web
On 23/05/07 02:02 AM, Nelson Serafica wrote:
I downloaded check_ser plugins for checking SER. When I try to run it in
terminal, it is successful though there's no output. Its just goes back
to prompt. When I miss some of the parametes, it shows an error so I
concluded that if it goes back to
, 2007 2:31 PM
To: Patrick Morris; Williams, John
Cc: nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] No output returned from plug-in
Try su'ing your nagios user and run the command manually. If it works,
it's permissions within the web interface.
Stephen Valdinger
MIS Helpdesk
-Original Message-
From: Lars Stavholm [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 15, 2007 12:09 AM
To: Williams, John
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] No output returned from plug-in
Williams, John wrote:
I am having an issue with a new nagios server
]
Sent: Tuesday, May 15, 2007 9:52 AM
To: Williams, John
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] No output returned from plug-in
I ment the failing check plugin,
i.e show us the output from sudo -u nagios check_
/L
Williams, John wrote:
When running the check I use
[mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 15, 2007 9:52 AM
To: Williams, John
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] No output returned from plug-in
I ment the failing check plugin,
i.e show us the output from sudo -u nagios check_
/L
Williams, John wrote
On Tue, 2007-05-15 at 09:56 -0400, Williams, John wrote:
The plugin doesn't fail when run manually:
newton2:/usr/lib/nagios/plugins# sudo -u nagios ./check_nrpe -H DWDEV -c
disks_DWDEV
All filesystems at less than 95% capacity.
It only fails to show output on the webpage.
There are
@lists.sourceforge.net
Subject: RE: [Nagios-users] No output returned from plug-in
Try su'ing your nagios user and run the command manually. If it works,
it's permissions within the web interface.
Stephen Valdinger
MIS Helpdesk Coordinator
Dover Chemical Corporation
3676 Davis Rd NW
Dover, OH 44622
330-365
I am having an issue with a new nagios server where some of the plugins
are showing No output returned from plugin on the nagios webpage. The
check that is running is a command that is defined on the remote host in
nrpe.cfg.
I looked around the archives and didn't find anything that would fix
Williams, John wrote:
I am having an issue with a new nagios server where some of the plugins
are showing “No output returned from plugin” on the nagios webpage. The
check that is running is a command that is defined on the remote host in
nrpe.cfg.
This usually indicates permission problems.
Any ideas as to what could be causing this???
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it
On 4/25/07, Valdinger, Stephen (DOV, MSX) [EMAIL PROTECTED]
wrote:
Any ideas as to what could be causing this???
Plugin is not in the location you have told Nagios it is, Nagios user does
not have permissions to execute the plugin.
Just a few to get you started.
Rob
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Valdinger, Stephen (DOV,
MSX)
Sent: Wednesday, April 25, 2007 8:21 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] no output returned from plugin
Any ideas
-Original Message-
From: nagios-users On Behalf Of Valdinger, Stephen (DOV, MSX)
Sent: 25 April 2007 14:21
Any ideas as to what could be causing this???
Usually because the plugin has returned nothing on STDOUT. So has the
plugin worked before ? Does it work if run by hand on the
Please always respond on list.
-Original Message-
From: Valdinger, Stephen (DOV, MSX)
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 25, 2007 8:39 AM
To: Marc Powell
Subject: RE: [Nagios-users] no output returned from plugin
I'm using the check_snmp_win.pl plug-in from Patrick
:[EMAIL PROTECTED]
Sent: Wednesday, April 25, 2007 9:48 AM
To: Marc Powell
Subject: RE: [Nagios-users] no output returned from plugin
Ok, new problem
What was the resolution for your original problem?
I get Invalid check type ! errors when running check_snmp_win.pl thru
terminal
Am
Dunno. I've never used the plugin before and it's not included with the
standard plugins. I've googled for
you though and found http://nagios.manubulon.com/snmp_windows.html which
looks like very good
documentation. Presuming that is the exact same plugin you are using, the
-T parameter must
Hi all.
I have migrated nagios from an hp-ux to a linux system.
All run correctly, but 4 checks via snmp give me following error: (No
output!)
Consider than if I run check_snmp manually I receive a correct answer, like:
test OK - 16257 |
From my experience as a programmer, if you don't know why you're doing
something, it's impossible to do it correctly.
The example you've shown us is a zone file.
It only returns the relevant part of the zone in answer to a query - so
if a user requests, .the_domain they will get IN A
-users-
[EMAIL PROTECTED] On Behalf Of Andy Shellam (Mailing
Lists)
Sent: Monday, December 11, 2006 6:52 AM
To: RZ; Nagios Users mailinglist
Subject: Re: [Nagios-users] Changing output of bind
From my experience as a programmer, if you don't know why you're
doing
something, it's impossible
Marc Powell wrote:
I'm not sure how this ended up on nagios-users
:$ Oops my bad, I've been flitting between posting on nagios-users and
bind-users all day - sorry! More coffee is required methinks.
Andy.
-
Take
Problem Solved!
The query it should be running is
select count(ProductName) from Products where ProductID=1;
however, nagios does not seem to like the ; at the end of
the mysql query, so when I look at the config I see the
following:
$USER1$/check_mysql_query -q 'select count(ProductName) from
Hi list
I've spent most of the last week googling for the solution to a
problem we're having with Nagios 2.4. All of our checks work fine,
apart from our one mysql_query check, which keeps returning No
output! in Nagios. Even when I change the password to the wrong
password, Nagios returns
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Ashley Dawkins
Sent: Thursday, August 31, 2006 8:59 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] No output!
Hi list
I've spent most of the last week
Dear Sir,
I am writing to thank you for your letter and say,
On 29/08/06, Andy Shellam [EMAIL PROTECTED] wrote:
Hi Michael,
I've not long reported the same sort of error in 2.4. On my machine a
reboot has *appeared* to sort it (keeping fingers and things crossed.)
If I forced Nagios to
Hi Brian
Whenever I'd changed the configuration I always used "killall -HUP
nagios."
The machine does use the rc init scripts on bootup and shutdown.
Several times I've kill'd the nagios process so absolutely nothing of
nagios was running, removed all the state information from nagios/var,
Assuming you stop/started the service after modifying your hosts and
services config files, is it possible you used the rc/init script?
Have you killed the service (with the kill command) and then restarted
it yet? I'd try that...
I was under the impression that nagios will spawn more processes
The 2 that are playing up still is an nrpe check which
executes a check_disk and check_swap command on another
machine. The status logs of the 2 services since midnight
are shown below.
I have no idea where tcp comes in, as it's not present in
any of the commands
Hello all,
I first sent this to the plugins mailing list but I think
this has more to do with Nagios core since I am now having the problem with two
different plug-ins. They both give me correct output when I run the checks
manually but Nagios consistently gives me a result of (No
Hi Michael,
I've not long reported the same sort of error in 2.4. On my machine a
reboot has *appeared* to sort it (keeping fingers and things crossed.)
If I forced Nagios to re-do the check it would come back fine, but in
most scheduled checks it would report No output! and an incorrect
Hi Patrick
Nothing telling in the logs as far as I can see.
On the Nagios server:
Aug 28 14:32:36 dns nagios: SERVICE ALERT: Sydney-1;Disk Space on
/endeavour;UNKNOWN;HARD;1;Cannot map tcp to protocol number
That's the only line for that time and date.
On the client, absolutely nothing since
Hi,
I've been using Nagios for around 5 months now with no problems. I've
recently added a new server onto my network, which has added somewhere
in the region of another 3 hosts and 12 services onto Nagios.
Since then I now keep getting random errors in the Status Information
for services
On Sun, 27 Aug 2006, Andy Shellam wrote:
I've been using Nagios for around 5 months now with no problems. I've
recently added a new server onto my network, which has added somewhere
in the region of another 3 hosts and 12 services onto Nagios.
Since then I now keep getting random errors in
Hugo,
I didn't think it relevant to post full details of hosts/services as
sometimes the commands work and sometimes they don't.
It's not a problem with command syntax, specific host or service - it's
a global thing. If I run the command manually they work fine, as shown
below.
Here's an
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Andy Shellam
Sent: Sunday, August 27, 2006 5:22 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] (No output!) Errors in Nagios 2.4
Hi,
I've been using Nagios
PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Andy Shellam
Sent: Sunday, August 27, 2006 5:22 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] (No output!) Errors in Nagios 2.4
Hi,
I've been using Nagios for around 5 months now with no problems. I've
Hi
When I run check_snmp with verbose parameter I get:
monit:/tmp/install/gwfl-nagios-plugins-2.1 #
/usr/local/nagios/libexec/check_snmp -v -H 10.1.1.1 -P 1 -C string -o
.1.3.6.1.4.1.9.2.1.58.0
/usr/bin/snmpget -t 1 -r 5 -m '' -v 1 -c string 10.1.1.1:161
.1.3.6.1.4.1.9.2.1.58.0
Sand Philipp
Gesendet: Freitag, 7. April 2006 09:20
An: nagios-users@lists.sourceforge.net
Betreff: AW: [Nagios-users] RE: CSV output out of availibility Reports
Hi there,
I remember a patch fort he avail.cgi, with which, you could
generate a cs= v output out of each avail.cgi report
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent: Monday, June 26, 2006 5:58 PM
To: nagios-users@lists.sourceforge.net; Marc Powell
Subject: RE: [Nagios-users] No Output
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent: Monday, June 26, 2006 5:58 PM
To: nagios-users@lists.sourceforge.net; Marc Powell
Subject: RE: [Nagios-users] No Output
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent
I just upgraded our monitoring system from Nagios 1.2 to 2.4. After
doing this, I've noticed that hosts are now showing as Unreachable
rather than Down when they are not pingable. For each of these hosts, I
see UNREACHABLE for the Host Status and (No output!) for Status
Information.
I am
Do the hosts showing Unreachable have a parent that's down?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Williard, Jason
Sent: Monday, June 26, 2006 1:59 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] No Output
I just
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Williard, Jason
Sent: Monday, June 26, 2006 3:59 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] No Output
I just upgraded our monitoring system from Nagios 1.2
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent: Monday, June 26, 2006 5:03 PM
To: Marc Powell; nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] No Output
HOSTS.CFG ENTRY
define host{
use generic-hos
-Original Message-
From: Williard, Jason [mailto:[EMAIL PROTECTED]
Sent: Monday, June 26, 2006 5:03 PM
To: Marc Powell; nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] No Output
HOSTS.CFG ENTRY
define host{
use generic-hos
Hi all.
I will make a question about the famous (No output!) error.
I am trying to watch cpu usage on a cisco router.
I am using check_snmp_load.pl from here
http://www.manubulon.com/nagios/index_commands.html
### CONFIGURATION ###
# checkcommands.cfg
define command {
-users] RE: CSV output out of availibility Reports
Hi there,
I remember a patch fort he avail.cgi, with which, you could
generate a cs= v output out of each avail.cgi report. I
already did some research in this list and with google, but I
can't fin= d the patch any more. Can anyone
Hi there,
I remember a patch fort he avail.cgi, with which, you could generate a csv
output out of each avail.cgi report.
I already did some research in this list and with google, but I can't find the
patch any more.
Can anyone please give me a hint, where I can download this patch?
Has anyone
On Thu, 16 Mar 2006 13:05:04 +0530 Mrutyunjaya wrote:
MD I tried executing the command but it seems the command is not there in the
MD system. I have installed net-snmp on the system. Can you please let me
MD know whether snmpwalk comes along with net-snmp package or I need to
MD install some
1 - 100 of 111 matches
Mail list logo
