I have been running Nagios for over a year with no issues. All of a
sudden, all of my current loads on my linux servers all go into warning
state at the same time, showing the exact same load, which then increments
every hour to critical. After a while (3 or 4 hours) they all come back
You are right, it was using check_local_load, is there a remote version of this
command?
Thanks.
Marty
-Original Message-
From: C. Bensend [mailto:be...@bennyvision.com]
Sent: Tuesday, December 04, 2012 6:05 AM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Weird
On Tue, Dec 4, 2012 at 4:26 AM, Martin Hugo martin_h...@hboe.org wrote:
Another issue is one check_Interface_Table that returns 255 out of bounds
but over 30 others (in the same service group using the same command)
return normal.
Such an error 255 out of bounds can happen, when the plugin
Martin, I've always used NRPE to run check_load remotely. If you use SNMP,
you can also write a custom plugin to gather the values that way. There
might be a plugin that someone else has written, too.
Jeffrey.
On Tue, Dec 4, 2012 at 8:33 AM, Martin Hugo martin_h...@hboe.org wrote:
You are
I have been running Nagios for over a year with no issues. All of a sudden,
all of my current loads on my linux servers all go into warning state at the
same time, showing the exact same load, which then increments every hour to
critical. After a while (3 or 4 hours) they all come back down
