Hello,
Can I monitor mscs-windows-cluster services with NAGIOS ?
Best plugins and or solutions ?
Idea's and other suggestions welcomed.
Tx,
Marc.
-
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies
- I need to monitor whether a remote daemon is running on a Linux host
and have a NAGIOS alert if it crashes (or disappeared for whatever reason).
Is 'check_nrpe' my best option, if so what syntax do I need ?
M.
-
This
Nagios [EMAIL PROTECTED] 2.6.9-22.ELsmp :
- I recently have the problem that the function 'Disabling
notifications for all services on this host'
combined with flagging 'Disable for Host Too' is no longer working.
This may have started after upgrading to
Hello,
I've got nagios installed and seems to be running ok except for one thing.
I'm running https checks with check_http and get the expected result when I
run it on the command line:
./check_http -H somehost.com -S
HTTP CRITICAL: HTTP/1.1 502 Bad Gateway
But in the UI its giving
- Nagios 3.2.0
---
- This morning, I find nagios stopped death in it's tracks. Single
daemon running,
servcie and host checks are no longer executed.
Stopping and restarting NAGIOS does not help. How can I remedy this ?
We left DST in Europe. Can this be due to a time
Ref : service nagios stop; now=$(date +%s); sed -i
s/^next_check=.*/next_check=$now/ /usr/local/nagios/var/status.sav;
service nagios start
Nagios 3.x
- I was wondering wether one can use UNIX groupnames in contact
defintions , or in cgi auth. directives
such as 'authorized_for_all_service_commands=... ; instead of having
to use individual usernames ?
I need to make a simple distinction between a couple of
Nagios 3.2.0
- By the end of the month, Europe will switch to DST.
Will I be affected by the Nagios DST-BUG which , which results in
NAGIOS becoming
dis-functional ?
Which countermeasures can I take to prevent being struck by this problem ?
M.
On Wed, Mar 10, 2010 at 9:57 AM, Jatin Davey jasho...@cisco.com wrote:
It did not help , Still getting the same error.
- Try re-starting the nsclient service afterwards (too).
M.
Thanks
Jatin
On 3/10/2010 2:10 PM, Verhaeghe, Koen wrote:
Hi,
You need to reset the windows performance
Hi everyone,
at the moment I'm playing around with passive checks.
maybe I'm to stupid, but will I be on the right way?
I've set up a new Server group called passive-servers' with only one test
server called muninbsd
this server will be monitored like a active server. I've only changed
...
We have some servers, which are located outside from our network and
without a permanent connection to our main nagios server.
...
...
how do I have to check the services on the servers which are outside of
our network? Do I have to install a hole nagios environment (like a
second
Hi
Is there a plugin bundled with nagios-plugins that helps us in checking
the memory usage on the linux box. I basically want to know the used
memory and the total available , Even if it is given in percentage i am
fine. Please let me know if there are plugins to do so.
I checked the
Hi Mark
I saw the website : http://nagios.manubulon.com/snmp_mem.html
I have a few questions:
1. When i click on the download version 1.1 , i get one text file with
some code in it , What do i need to with this file ??
Save it as a perl script; in the libexec dir of your NAGIOS
Should it be placed at both the nagios server and the target box which
is being monitored ??
No (NAGIOS server only), by definition, because it queries the SNMP
daemon on the
remote Linux box, for the required memory stats.
M.
Hiya
I tried googling. Would anyone know how to switch off send a notification
when there is an acknowledgement.
- This is an option which you can de-select. Check the NAGIOS menu closely.
M.
--
Download
Somehow our notifications are getting disabled. I assume a user is doing
this via the Process Info page.
What and where can I grep to find out who is running this command from the
Web interface.
- Check .../var/nagios.log , configure proper authentication
setup(s) for NAGIOS
M.
Unless I'm mistaken, we had this timeperiod problem occur here. Some
alerts were sent during a timeperiod for which notifications
are not enabled. I did restart Nagios after DST went into affect
just for fun, but that was before these alerts went out.
I know that the fix for this when
The new link ' Schedule downtime for this host and all services' in
NAGIOS 3.2.1 confused me.
Does it schedukle shutdown for host's services only as described in
ChangeLog and or is scheduled
shutdown for the host itself included ?
The naming seems to suggest scheduling shutdown for BOTH host
- Is it possible in NAGIOS, to let the result of a passive check ,
'expire' after a given time period ?
(this could be used for errors, which are considered less
important, and are being considered 'dead weight' for
the time being).
I mean if I a get a CRITICAL (passive) test result,
Hello list,
I have encountered the following 'make' error while trying to compile
nagios-plugins-1.4.14 (after successfully running the 'configure' command)
on a Solaris 10 client host.
...
Try 'gmake' (GNU Make) ,
M.
Did anybody ever use the collector between Nagios and Scom ??
I do ,
M.
--
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit.
We are looking to do an large installation of Nagios. Is it possible to
monitor over 800 machines and over 14000 services?
Works like a charm :-)
Has anyone tried doing anything like this? If you have how successful was it
and how did you configure it?
Same as for a small installation
This is just a test. I haven't received any mail from the list in
almost a month.
Both philosophically and technically it can be argued that this test
won't help you.
Unless you reply (but there's more to think about here,then you may be
aware of) :-)
M.
- I wonder if the developers would ever contemplate , implementing ,
a live title-bar in NAGIOS,
including for instance the all service/host problems counter(s) ?
M.
--
Beautiful is writing same markup. Internet
Hello list,
is the following setup possible :
host A : Nagios Server
host B : server being monitored
host C : backup server
If Nagios (host A) can not ping host B (or any other check via nrpe), can
Nagios then execute a command on host C ??
I want Nagios to activate the backup server
Hi all,
I am trying to configure nagios with NSCA.
NSCA is successfully receiving the messages (sent with send_nsca), updates
the services state and the message info.
The problem is that after 10 seconds, the service is returning to OK
state; in the meantime I haven't send any other
Hi List
I have a problem using check_nrpe:
The script on the remote machine is running this command:
#/bin/bash
output=`sudo /usr/sbin/lsof -X |grep tomcat| wc -l`
max=$1
if [ $output -lt $max ]; then
echo OK |value is $output
exit 0;
else
echo CRITICAL value is $output
exit
What causes this error message:
Error: 'pm2fwi' is not a valid parent for host 'pm2fw'!
This is the insdie, and outside of a firewall. They are in 2 diferent
subnets, and 2 different domains. Still, this relatiionship is corect, and
I would expcect Nagios to allow me to define it,
- Make
We’re looking at a service that has problems from time-to-time, and it gets
auto-restarted when needed (Windows). What I’ve been looking for is a way
to say that it needs 3 restarts ir order to go critical, but only within a 1
hour time frame. Anyone come up with a way to do time frames like
On Fri, Jan 28, 2011 at 4:44 PM, j...@jms1.net wrote:
Greetings.
I'm working on a distributed nagios system, with two master servers
running the web interface to view status, and several dozen slave
servers running the actual tests. So far it's working pretty well, but
I've run into a very
Hello there,
I'm wondering if there is a way to make nagios send notification for
services which failed during non notification timeperiod ?
' Truly remarkable, although in quantum logic,even the
obvious answer is not 'guaranteed' ...
M.
On Wed, Feb 16, 2011 at 1:38 PM, Tristan Drinkwater
trist...@micro-p.com wrote:
Hi guys,
I hope someone can help me.
I'm trying to set up Nagios to return a warning for all red error logs in
both the system and application logs on a windows 2003 server.
So far no matter what I try I
Thanks for the reply.
I fear the main problem here is the lack of knowledge that's sat in-between
my chair and my pc :)
I've edited the ini file on the server to allow both arguments and nasty
chars and restarted the service.
If I use the -a switch after -c checkEventLog all I get back
Good afternoon list!
I'm having trouble with NSClient++ in the Windows Server 2008 x64.
I try reinstall NSClient++ and the Nagios Server can't connect to
NSClient++. I'm sending an log attached.
- Check your windows server 2008 firewall settings.
M.
On Thu, Jun 9, 2011 at 11:47 AM, Andreas Ericsson a...@op5.se wrote:
On 06/09/2011 08:15 AM, Patrik Båt wrote:
Hello!
How is the IPv6 support in Nagios Core? with macros, and address6 ?
Nagios core doesn't care one whit about ip addresses. Handling DNS
lookups and ipv6 addresses is a job
On Tue, Jul 26, 2011 at 10:41 AM, Andrew Morum amo...@brendata.co.uk wrote:
We're seeing an error during make install of 3.3.1.
I have checked the install upgrade docs for 3.3.1, all prerequisites
are already installed. 3.2.3 still installs with no errors.
OS: Ubuntu 8.04.4 LTS (fully
- My Nagios Home - Check for updates
still says I am 'current' no need to update, despite 3.3.1 being
available and running
3.2.3 !
M.
--
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't
I was installing nagios3.3.1 and got this message
i have shown the lines ending in 'no'
please help
root@ubuntu11:~/software/open_source/nagios/nagios# ./configure
--enable-embedded-perl --with-perlcache --with-command-group=nagcmd
checking whether we are cross compiling... no
checking
Forwarding this to the list, as another post indicates, this might be
a 'broader' problem :
(check for further list-replies) :
On Mon, Aug 1, 2011 at 3:42 PM, Bereket Zeselassie bereket...@yahoo.com wrote:
i appreciate ur help.
configured it without perl and it went good until i 'make install'
I was looking for something in the wiki, and happened upon this page:
http://wiki.nagios.org/index.php/Diet_Coffee_-_How_To_Combine_Green_Tea_And_Weight_Loss
Nagios Enterprises is really branching out, eh?
It's probably a bit like, Google ; once you become too rich ... :-)
M.
I've got a Nagios installation all up and running and working just fine.
Now I have to start monitoring some Windows Servers.
There are so many different plugins. What are the recommendations for doing
this?
We have some Win Server 2003, 2008 as well as Exchange and SQL.
Ok, so it sounds like there might be 3 best ways to monitor Windows in
general.
I will have to check them out in detail before deciding which way to go. I
do note that the following though from reading about them -
1. Checkwmiplus
- I switched from NSclient++ to checkwmiplus, because
Folks,
Nagios 3.2.0 is running on SLES 10 SP 1
NRPE running on Windows
It all seems to work fine for a while (10 mins) and then I start seeing
socket timeout errors. The only way to fix this is to restart the nrpe
service on the node that is being monitored.
Has anyone else had this
- I am looking for best plugins, concerning , web application
checking, 'going futher'
then check_html, like dealing with advances auth. challenges, tokens etc.
Giving me the most flexible solution for checking webapps in Nagios ?
M.
On Tue, Jan 17, 2012 at 4:59 PM, Tom t...@limepepper.co.uk wrote:
On 17/01/12 15:32, Mark Elsen wrote:
I upgraded my nagios to the 3.2.3 base rpm from rpmforge and I'm
seeing seg faults...
This is the strace of strace /usr/bin/nagios /etc/nagios/nagios.cfg
stat(/usr/lib64/perl5/site_perl
Hi,
In nrpe.cfg only_from has my nagios server IP Address. What else can i check
for this issue.
- Check the equivalent of /var/log/messages on HP-UX. I think it is
/usr/adm/syslog
Grep on nrpe (error) messages if any.
M.
On Fri, Feb 24, 2012 at 4:11 PM, MAD m...@b-care.net wrote:
Hi list,
I was trying to monitor events on a Windows server through the
CheckEventLog functionnality built in NSClient++.
I didn't notice first while I was adding my checks but memory usage and
cpu load started raising as I was
Hi all
** **
Actually I make many query via snmp to routers, fw, etc.
** **
Is it possible (and how) received trap snmp from Nagios server?
-Checkout theNagios SNMP Trap
- I have some 'home-written' notification scripts launched from NAGIOS ;
now when using
nagios 3.4.1 , all NAGIOS_* variables are gone. (printenv listing).
How come ?
How can I get them back ?
M.
--
Live
- I have some 'home-written' notification scripts launched from NAGIOS
;
now when using
nagios 3.4.1 , all NAGIOS_* variables are gone. (printenv listing).
How come ?
How can I get them back ?
+ Make sure you're not using large_installation_tweaks and that you
On Mon, Jun 4, 2012 at 1:48 PM, Randal, Phil phil.ran...@hoopleltd.co.ukwrote:
Does the patch in
http://tracker.nagios.org/view.php?id=338
fix the issue (notifications during scheduled downtime) for you?
Cheers,
Phil
Initial testing seems to indicate that it
I have upgraded to Nagios Core 3.4.1 last week. There are a couple of
issues I noticed.
1. notification for service check failures are being sent when the host is
in downtime.
2. downtime are not being remove when it is expired.
On Wed, Jul 18, 2012 at 2:33 PM, Andrea Cappelli a.cappe...@asidev.comwrote:
Hi list,
I would monitor a not so large Mikrotik network (about 100 host) via
SNMP, but I have some questions
1) Where can I find OID for my devices (different version of RouterOS)
and how use it?
SNMP MIBS, for
Hi all,
I'm very new to Nagios. I have certain doubts.
I need to find a way to find the number of tomcat connections. More
precisely, I need to know:
If Number of connections ( 500 for 1 min) or else alert.
Is that possible to do so ?
There are a number of plugins out there to
Hi all,
I'm new to nagios. I need to know how I can specify the timing
constraints. For example if I want to do something :
if something is down for 10 min then alert me.
In this case where do I specify the timing constraints?
There are numerous timing vars, determining these
I'm a long-time user of Nagios with active checks. Today I started using
passive checks with NSCA and I'm having a problem.
The documentation states A service must be defined in Nagios before you
can submit passive check results for it.
I defined a config block like this, to define a
On Wed, Sep 5, 2012 at 5:51 PM, Matsushita, Nobuo
nobuo.matsush...@childrenscolorado.org wrote:
Hi,
I installed and configured nagios 3.4.1. When I use Firefox, everything
works fine. But when I use Internet Explorer 8 ( under Windows 7), I get
the following error message:
Internet
On Saturday 20 October 2012 03:41 PM, Jatin wrote:
Hi
I follwed the quick installation guide to install Nagios and then
installed the plugins with the link for the steps.
I installed everything and got the UI for both Nagios and PNP4Nagios.
Installed the check_mysql_health plugin as
Yes , while doing the sample run from the /usr/local/nagios/libexec
dorectory i see that there is no response from the check_snmp plugin. I
used the command in the following way:
./check_snmp -H ip.address -o OID -C Community-String -t 30
There is no response , it just stays on there
Hi folks..
I'm trouble here...
We have a thousand host behind VPN/Firewall.
For now, we use NC_NET to collect WMI data from server, and send this
datas to Nagios server, throught NSCA.
We do it in passive mode...
What happen here is that, even host came down, I still see the status ok
for
Nagios version incorrect,
Tx for your efforts - yet the download menu for Nagios Core, advertises
3.4.4. as being 3.4.3;
- The ChangeLog file does not contain any
3.4.4. information
(ref : http://www.nagios.org/download/core/thanks?t=1358230874)
M.
On Mon, Jan
I have this issue whereby after changing the ip value in one host.cfg,
restarting nagios, when I checked the logs it still pinging the old
...
Please verify online-config using the right-pane, down button
'Configuration' ; check wether host addresses
found are value as intended.
M.
On Wed,
62 matches
Mail list logo