If only there were some kind of method for Jay to publish which
addresses are actually authorized to send mail on behalf of
baylink.com (which could then be leveraged by sc1.nanog.org to turn
the recommended soft fail into a hard fail and stop this kind of
silliness cold)...
Billet:~ rs$ dig
Masataka Ohta mo...@necom830.hpcl.titech.ac.jp writes:
Robert E. Seastrom wrote:
Let's assume 4:1 concentration with PON.
Why on earth would we assume that when industry standard is 16 or 32?
That is because additional 4:1 concentration is usually at CO,
which does not contribute
Jason Baugher ja...@thebaughers.com writes:
Our main cost is labor. Fiber, fdh, splitters, etc... are marginal.
dingdingdingding WE HAVE A WINNER. :-)
-r
Masataka Ohta mo...@necom830.hpcl.titech.ac.jp writes:
Let's assume 4:1 concentration with PON.
Why on earth would we assume that when industry standard is 16 or 32?
16 is a safe number.
-r
Scott Helms khe...@zcorum.com writes:
In that case its even harder. Before you even consider doing open
access talk to your FTTx vendor and find out how many they have done
using the same architecture you're planning on deploying. Open access
in an active Ethernet install is actually
, Robert E. Seastrom [[r...@seastrom.com]]
wrote:
Scott Helms [[khe...@zcorum.com]] writes:
In that case its even harder. Before you even consider doing open
access talk to your FTTx vendor and find out how many they have
done
using the same
Scott Helms khe...@zcorum.com writes:
On Wed, Feb 6, 2013 at 10:30 AM, Robert E. Seastrom [[r...@seastrom.com]]
wrote:
If you were talking about layer 2 handoffs, your statement
is perhaps
even more untrue - active ethernet and PON layer 2 handoffs
Jay Ashworth j...@baylink.com writes:
Still, the power budget improvements by not going with a single strand
active ethernet solution (which were another suggested technology and
has actually been deployed by some muni PON folks like Clarkesville,
TN) are huge. Imagine a 24 port switch that
Leo Bicknell bickn...@ufp.org writes:
In a message written on Sat, Feb 02, 2013 at 08:55:34PM -0500, Jay Ashworth
wrote:
From: Robert E. Seastrom r...@seastrom.com
There is no reason whatsoever that one can't have centralized
splitters in one's PON plant. The additional costs to do so
Owen DeLong o...@delong.com writes:
On Jan 29, 2013, at 20:30 , Jean-Francois Mezei jfmezei_na...@vaxination.ca
wrote:
On 13-01-29 22:03, Leo Bicknell wrote:
The _muni_ should not run any equipment colo of any kind. The muni
MMR should be fiber only, and not even require so much as a
Jeff Kell jeff-k...@utc.edu writes:
On 12/27/2012 1:26 PM, Patrick W. Gilmore wrote:
On Dec 27, 2012, at 13:19 , randal k na...@data102.com wrote:
(We move ~1.4gbps to Netflix, and are thus not a candidate for
peering. And they have no POP close.)
Why don't you ask Netflix? And why not ask
David Walker davidianwal...@gmail.com writes:
[ patent fight recap ]
Thanks for posting those. I recall the discussions surrounding the
HSRP patents well, but it's been a while and I have proportionally
more gray hair (and less overall) now.
My problem is not with Theo nor with the IETF. My
Henning Brauer hb-na...@bsws.de writes:
* Robert E. Seastrom r...@seastrom.com [2012-11-30 13:46]:
My problem is not with Theo nor with the IETF. My problem is with a
crappy and credulous implementation. When an outage is caused by
redundancy software that comes from an organization
Jussi Peltola pe...@pelzi.net writes:
The amount of detail in the original posting is rather disappointing,
with absolutely no hope of anyone being able to reproduce the problem
with the data given.
It was not intended as a bug report, instead merely an expression of
disappointment and an
Stuart Henderson s...@spacehopper.org writes:
I don't see anything here indicating that it's to do with CARP
believing things sent over the wire, I suspect the problem would still
occur if CARP were disabled on the pfSense box. (Do people really
run CARP in the wild without authentication
I can't seem to recall anyone griping about this here on our august
little list but google finds that I'm by no means the first to have
been burned by an unholy interaction between VRRP and CARP.
Let's skip the protocol discussions (same protocol number and uses
multicast) [*] and go straight to
Blake Dunlap iki...@gmail.com writes:
That's what happens when you just follow vendor recommendations blindly. If
you do follow that on vm's (which can actually be a good practice), make
sure they pull from your own time infrastructure, and not just the world at
large, and that those servers
Hi everyone,
I'm looking for a gigabit ethernet media converter to go from SFP
plugable optics to 802.3at POE+. The application involves wireless
access points some distance from a central switch for a venue.
Difficulty: in my old age, I've become allergic to installing
completely unmanaged
Subscription only, $199/year (special introductory offer, normally $499!).
Try it free for two weeks but only if you cough up info.
How about a summary for those of us who are disinclined to do either?
-r
bmann...@vacation.karoshi.com writes:
Chris Campbell ch...@ctcampbell.com writes:
Is anyone aware of any historical documentation relating to the choice of 32
bits for an IPv4 address?
Cheers.
8 bit host identifiers had proven to be too short... :)
-r
Seth Mattinen se...@rollernet.us writes:
I came across these threads today; the blind ignorance towards IPv6 from
some of the posters is kind of shocking.
There are actually a few good points mixed in there, like the guy who
observes that dual stacking is of limited utility if there are no
Paul Kelly :: Blacknight p...@blacknight.com writes:
Are any of you (that use Exim as their MTA) having SSL write errors
in your exim logs when delivering e-mail to Gmail or Google
addresses?
Don't see anything from here. More details when you post to
exim-users couldn't hurt.
Will Orton w...@loopfree.net writes:
I've considered using J's PE-4CHOC3-CE-SFP (OC3 emulated SAToP), then I
could do it all with gig-e underneath. Does anyone make a cheaper OC3
circuit emulation module or box? Most likely the customer wouldn't believe
such a thing is possible and we'd
Randy Bush ra...@psg.com writes:
NANOG is in the process of completely redeveloping its website
(http://www.nanog.org) and is looking for feedback from the community
and NANOG members.
i have been exceedingly impressed by the current web site's serious
feature set implemented without a
Hi Shahab,
You can find out how much bandwidth they're using by having that
reported periodically via RADIUS (or at least when the session ends,
worst case). Store in database. SELECT sum(blah) from foo where id=bar.
Next question is what do you want to do to them once they exceed their
You're lucky. Verizon did a great job installing mine (ONT on the
backboard I put in the basement for them, handoff on ethernet rather
than MOCA, etc) but somehow never managed to get around to dispatching
anyone to actually install the permanent fiber drop (despite multiple
calls).
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire
labeler. So long as the supplies were fresh it was great.
In the storage unit I have a Brady TLS2200. Supplies are expensive,
but it works reasonably well. Unfortunately the battery is shot
(gotta replace
George Herbert george.herb...@gmail.com writes:
On Tue, Aug 21, 2012 at 4:06 PM, goe...@anime.net wrote:
On Tue, 21 Aug 2012, George Herbert wrote:
On Tue, Aug 21, 2012 at 3:25 PM, valdis.kletni...@vt.edu wrote:
On Tue, 21 Aug 2012 17:11:49 -0500, Grant Ridder said:
I love spam from
Perhaps this time they can afford to run you some real, honest-to-god
Helvetica cable rather than Arial cable as you noted below.
http://en.wikipedia.org/wiki/Arial#Criticism
You're definitely a bigger geek than I am though for griping about the
font they used for the writing on your drop
Hi folks,
Sorry for the extremely broad email but I'm trying to sort out an IRR
issue regarding automatic filter generation at Level(3) on behalf of a
friend.
The telemetry I'm getting (thirdhand and believed to originate from
first line support) suggests that both Level(3)'s direct customer
Thanks to all who reached out to me in private email and on IRC.
Here's the thumbnail explanation of how to do it (so some future
searcher doesn't curse me for not summarizing to the list).
By default Level(3) only searches one IRR component for you. I can
understand why one would want to
An anycast solution that doesn't involve a way to promptly yank the
route when the service is unhappy is not really a full anycast
solution. You could probably use http://code.google.com/p/dhquery/
for health checking, wrap in a script with something to talk to bgpctl
(if you're running
Actually, that's one of the most insightful meta-points I've seen on
NANOG in a long time.
There is a HUGE difference between IPv4 and IPv6 thinking. We've all
been living in an austerity regime for so long that we've completely
forgotten how to leave parsimony behind. Even those of us who
Diogo Montagner diogo.montag...@gmail.com writes:
For screening questions (for 1st level filtering), IMO, the questions
has to be straight to the point, for example:
1) What is the LSA number for an external route in OSPF?
This can have two answer: 5 or 7. So, I will accept if the
Tyler Haske tyler.ha...@gmail.com writes:
Someone running an NTP Server connected to a cesium clock could run
the leap-second time code. Since its *their job* to have the correct
time, they can do all the fancy rarely used things that make parts of
the Internet die every couple of years.
Word around the campfire is that the 18x is jittery compared to the 18.
Maybe it only matters if you are super-anal.
Majdi, do you have any current info on this?
-r
Ryan Malayter malay...@gmail.com writes:
+1 on the freesd-or-linux. with say a Garmin GPS-18x or whatever
timing puck. Have
Randy Bush ra...@psg.com writes:
have a friend who is a penguinista and wants to run a simple soft pbx.
support of soft phones, 7960s, connect to a commercial sip gate, ...
reccos for a packaged solution.
While Asterisk's configuration files are horrible (and written by
people who didn't
Andy Susag asu...@ifncom.net writes:
Seems kind of counterproductive to ARIN though. I wouldn't think they'd
like a database full of fudged SWIP info, but I guess they're OK with
it...
They require an officer attestation. SWIP info that is made up out of
whole cloth sounds suspiciously like
sth...@nethelp.no writes:
Anyway, not the best devices for an edge router that is for sure.
Which is too bad... for very small DC edge applications, the J6350
was a pretty cool router in earlier versions of JunOS that didn't
decide to re-engineer your network and transit for you.
We have
Actually, Suresh, I disagree. It depends on the
facility/country/continent, the cost of joining the local IX fabric at
a reasonable bandwidth, your cost model, and your transit costs. In
short, it's not 1999 anymore, and peering is not automatically the
right answer from a purely fiscal
Luke S. Crawford l...@prgmr.com writes:
On Sat, Apr 07, 2012 at 06:16:30PM -0400, Robert E. Seastrom wrote:
Sometimes making the AS path as short as possible makes a lot of sense
(e.g. when trying to get an anycast network to do the right thing),
but assumptions that peering results in lower
Luke S. Crawford l...@prgmr.com writes:
On Sat, Apr 07, 2012 at 07:25:24PM -0400, Robert E. Seastrom wrote:
Generally the costs of transit are pushed down by competition. As a
vendor your costs for bandwidth/transport/port*bw may drop but you are
unlikely to drop your prices to your
SIP trunking consolidation is buzzword heavy and context-light.
What problem are you trying to solve and at what scale? Do you have a
requirement to have the provider be a traditional TDM-based
organization or is an aggregator sufficient? How price-sensitive are
you?
At fairly small scale (10
Jimmy Hess mysi...@gmail.com writes:
Seems like a waste for VZ not to reclaim it so it can be
recycled/put to good use.
To put some numbers with this statement (which I agree with btw):
OSP cable is commonly available composed of 19 AWG, 22 AWG, 24 AWG,
and 26 AWG pairs. 19 and 26 are
William Herrin b...@herrin.us writes:
That depends on the cost of recovering it. We're not talking about
salvage operators pulling cable, we're talking about highly trained
[sic] Verizon installers.
The last 4 pairs in use on that 3000 count cable will tend to linger a
long, long time
More like wasting no time in fulfilling the prophesy that people will
treat it like just another rfc1918 space and deploy it wherever they want.
not that randy is likely to get bitten because he's not behind a cgn
nor is he planning to be, but still, that took all of what, 72 hours?
-r
George
George Herbert george.herb...@gmail.com writes:
On Thu, Mar 15, 2012 at 1:57 PM, Robert E. Seastrom r...@seastrom.com wrote:
More like wasting no time in fulfilling the prophesy that people will
treat it like just another rfc1918 space and deploy it wherever they want.
not that randy
Faisal Imtiaz fai...@snappydsl.net writes:
I am not familiar with VZ's FIOS network...
however I suspect that if they are using a Redback at the Headend, it
would allow you to have a 'bridge' network with secure arp
settings. (it's a feature that we have seen on Redback's...)
AFAIK Verizon
Christopher Morrow morrowc.li...@gmail.com writes:
On Wed, Mar 14, 2012 at 8:14 PM, Robert E. Seastrom r...@seastrom.com wrote:
Faisal Imtiaz fai...@snappydsl.net writes:
I am not familiar with VZ's FIOS network...
however I suspect that if they are using a Redback at the Headend
Doug Barton do...@dougbarton.us writes:
On 3/11/2012 3:15 PM, Iljitsch van Beijnum wrote:
But ARIN's action meant it never had a chance. I really don't get why they
felt the need to start allowing IPv6 PI after a decade
Because as far back as 2003 ARIN members (and members from all the
Ryan Malayter malay...@gmail.com writes:
On Mar 12, 10:07 am, Robert E. Seastrom r...@seastrom.com wrote:
It didn't help that there was initially no implementation of shim6
whatsoever. That later turned into a single prototype implementation
of shim6 for linux. As much as I tried to keep
Andy Davidson a...@nosignal.org writes:
Because TCP MD5 packets touch a router's CPU, using MD5 introduces a
new attack vector - see nanogii passim
(e.g. http://www.nanog.org/meetings/nanog39/presentations/Scholl.pdf).
Don't do it. :-)
Tom's slide deck is often misinterpreted - the salient
Anurag Bhatia m...@anuragbhatia.com writes:
Can someone share if there's huge difference in . root servers Vs gTLD
servers? I understand that root only hold all TLD's - cc and gTLD
delegation that would be few hundred TLDs delegation while gTLDs hold lot
of domain names but if one country
A. Pishdadi apishd...@gmail.com writes:
We are looking for a switch or a device that we can use for mirroring tap
ports. For example , take a mirror port off of a core router say a 6509,
connect it to a port on said device, say port 1. I would like then to be
able to mirror port 1 on said
Is clearance the problem, or the ability to obtain clearance due to
something in their background? If your work requires it, you should have
some recourse for applicants to obtain the required clearance, no?
My understanding is that while primary and subcontractor companies can
put people
Randy Bush ra...@psg.com writes:
well, not exactly. to quote myself from the other week in another forum
[ 30 lines deleted ]
Sorry to drone on, but these three really need to be differentiated.
The truly wonderful thing about the evolution of BGP security is its
elegant simplicity. It
bmann...@vacation.karoshi.com writes:
I missed the part where ARIN turned over its address database
w/ associatedd registration information to the Fed ... I mean
I've always advocated for LEO access, but ther has been
significant pushback fromm the community on unfettered access
to that
Hi all,
Any thoughts on products that screw up networks in deterministic (and
realistic found-in-the-wild) ways? I'm thinking of stuff like
PacketStorm, Dummynet, etc. Dial up jitter, latency, tail drop, RED,
whatever...
(I know someone's gonna say Just buy a Brand Z FubarSwitch 3k, they
will
Tim Chown t...@ecs.soton.ac.uk writes:
On 26 Jan 2012, at 16:53, Owen DeLong wrote:
On Jan 26, 2012, at 8:14 AM, Ray Soucy wrote:
Does this mean we're also looking at residential allocations larger
than a /64 as the norm?
We certainly should be. I still think that /48s for
Christopher Morrow morrowc.li...@gmail.com writes:
On Sun, Jan 22, 2012 at 11:29 AM, Brandon Kim
brandon@brandontek.com wrote:
I have FIOS and I have no issues. However I do know awhile back they had
issues and I was affected by
the outage
Maybe it hasn't made its way to me
Jamie Bowden ja...@photon.com writes:
I don't care for the Actiontec boxes either, but the STB program
guides and other features don't work without it, so I have mine
forward all IP traffic unmolested to my own as the DMZ host
Actually this can be worked around. My config has SA, er, Cisco
Jay Ashworth j...@baylink.com writes:
- Original Message -
From: Jared Mauch ja...@puck.nether.net
network side. I'm personally not convinced of the value of very short
lease times (less than an hour)
Less than an hour, perhaps not.
On small residential networks, though --
What do you mean by de-bogon? Do you mean that your customers'
addresses are listed in various RBLs for previous misbehavior? That
they are using addresses that were never properly allocated to them?
Something different?
You don't own IPv4 addresses; they are assigned or allocated to you
in
valdis.kletni...@vt.edu writes:
Would it be correct to summarize the ARIN position as It's murkier than
Cerner
makes it out to be, and some lawyers are gonna get stinking filthy rich
litigating this one?
:)
In any litigation, Counsel always wins. I often remind myself that
there's still
Doug Barton do...@dougbarton.us writes:
On 11/24/2011 11:58, Jonathon Exley wrote:
That's the problem - as a propellorhead I don't make the purchasing
decisions. I can recommend products but low cost speaks more loudly than
this gear is a dog to work with.
That's where you get a chance
Mark Radabaugh m...@amplex.net writes:
On 11/23/11 11:23 AM, valdis.kletni...@vt.edu wrote:
On Wed, 23 Nov 2011 11:14:34 EST, Bryan Fields said:
So really all a hacker needs is a pair of dykes, some electrical tape, and
an
all black jumpsuit.
Actually, you want a really dark blue
Leigh Porter leigh.por...@ukbroadband.com writes:
Has anybody had experience of mikrotik support? Is it any good? Any
thoughts about the time to fix bugs?
I have dealt with Mikrotik support. They were easily comparable to
[CJ]TAC. Which is to say guy was pleasant and courteous, I could
tell
To echo what Betty said and address an unspoken concern:
market...@nanog.org is the mailing list (and external interface?)
for the folks who make sure that there are good cookies and other
break goodies, beer-n-gear sponsors, meeting hosts, etc. It is most
assuredly not a spamming list, which I
Jeffrey Ollie j...@ocjtech.us writes:
On Thu, Nov 17, 2011 at 2:52 PM, Jay Ashworth j...@baylink.com wrote:
The real question is whether it was issued after HHGTTG.
HHGTTG first appeared on the BBC in 1978. Thinking Machines
Corporation was formed in 1982. As far as I can tell the first
Steven Feldman feld...@nanog.org writes:
I am sad to announce that Robert Seastrom has resigned from the NewNOG
Board of Directors, effective yesterday.
Accordingly, the board has selected Michael K. Smith to fill the
vacant position between now and the October Election.
Just wanted to
Randy Bush ra...@psg.com writes:
what's new? how about the operational technical effects, like data from
modeling various resolvers' responses to a large root zone?
I think the proper model is popular TLDs, perhaps the traditional
gTLDs. As any (even former) decent sized TLD operator can
Matthew Palmer mpal...@hezmatt.org writes:
And it only gets better from there... how many places have various cutesy
naming schemes that might include one or more trademarks (or whatever) that
someone might want as a TLD?
As it happens, I have a set of routers that are named { craftsman,
Jim Gettys j...@freedesktop.org writes:
Now that I have mitigated the bufferbloat disaster in my home cable
service via bandwidth shaping, Skype works sooo much better for
me. This is what devices such as Ooma are doing. Unfortunately, it
means you have to defeat features such as Comcast's
Mark Andrews ma...@isc.org writes:
It's not usable as general purpose unicast. Both those drafts
attempt to do that.
http://tools.ietf.org/html/draft-wilson-class-e-00 does not.
Recommend you re-read.
It would be possible to use it as restricted purpose unicast, i.e.
to connect from a
Owen DeLong o...@delong.com writes:
The DoD does not seem particularly anxious to announce or explain
their usage of those blocks to the rest of the community.
They have much larger quantities of significantly more sophisticated
armaments than ARIN.
I agree it would be nice if they would
Crooks, Sam sam.cro...@experian.com writes:
Is it permissible, from a policy perspective, for a multi-homed end user
to announce the numbering resource allocation received from one RIR (for
discussion purposes, let's say ARIN) to upstream service providers in a
different region (for example,
Scott Helms khe...@ispalliance.net writes:
IPv6 for some ISPs will be extraordinarily painful because of legacy
layer 2 gear (usually DSLAMs that drop any frame with IPv6 in the
EtherType field), inability to upgrade customer gear efficiently
(again mainly a DSL problem where TR-069 isn't in
Owen DeLong o...@delong.com writes:
I fully expect the record to be placed soon and it looks like that
is the last remaining hurdle. Once that is done, I will pay my dues.
There have been records in the zone for ages. I don't have a
problem with you calling out our oversight on a
Owen DeLong o...@delong.com writes:
I fully expect the record to be placed soon and it looks like that
is the last remaining hurdle. Once that is done, I will pay my dues.
There have been records in the zone for ages. I don't have a
problem with you calling out our oversight on a
It is unclear from this NOTAM whether this is an intentional
perturbation of the satellite signals vs. a terrestrial transmitter
(my money is on the latter), but it illustrates why one might want
geographically dispersed time sources on one's network, as well as why
the current trend towards
Matlock, Kenneth L matlo...@exempla.org writes:
Probably related to:
http://www.engadget.com/2011/01/20/faa-warns-of-ongoing-gps-issues-in-so
utheastern-us-due-to-defens/
Sounds like they're doing 'tests' on GPS near SE Georgia.
Yes, very likely related considering that the map from the
Michael Holstein michael.holst...@csuohio.edu writes:
I'd be curious to see what effects (if any) those who use
GPS-disciplined NTP references in Southeastern Georgia see from this
experiment.
Aren't CDMA BTS clocked off GPS?
NTP isn't going to be the only ripple.
Sure, and there are
Gary Buhrmaster gary.buhrmas...@gmail.com writes:
NTP isn't going to be the only ripple.
Most of the brand name GPS NTP solutions have a clock
with is more than stable enough to survive without GPS
lock for 45 minutes(*). Some of the more expensive units with
temperature controlled
Joel Jaeggli joe...@bogus.com writes:
Sure, and there are GPS-steered Rb clocks in telco-land too as well as
a ton of stuff I don't know about yet until everyone else here chimes
in; it's just that NTP is highly visible to NANOGers.
if your high quality stratum one time source isn't capable
Kevin Oberman ober...@es.net writes:
The next ship will be departing in a hundred years or so, advance
registration for the IPv7 design committee are available over there.
Sorry, but IPv7 has come and gone. It was assigned to the TUBA proposal,
basically replacing IP with CLNP. IPv8 has
Owen DeLong o...@delong.com writes:
Personally, I think /64 works just fine.
I continue to believe that the allocate the /64, configure the /127
as a workaround for the router vendors' unevolved designs approach,
which Igor and I discovered we were in violent agreement on when on a
panel a few
TR Shaw ts...@oitc.com writes:
There is a federal directive that has been in place for a number of
years that requires IPV6 support for all new IT contracts/systems
and also a directive to all federal agencies to support IPV6 by 2008
(See
Perhaps someone from this august list can offer a clue here.
Have: Cisco 3524-PWR (paleo-POE, pre-802.3af Cisco standard).
It runs the 7960Gs great.
Have: Wireless AP stuff that wants 12v on the unused pairs for
passive POE. 48v will let the magic smoke out.
Might buy: phone that does
tagn...@gmail.com writes:
The Ubuquti Instant 802.3af seems to do what you want (as long as the
equipment can handle 16v)
http://ubnt.com/8023af
http://ubnt.com/downloads/instant8023af.pdf
On Fri, Dec 31, 2010 at 9:00 AM, Robert E. Seastrom r...@seastrom.com wrote:
Perhaps someone from
Jay Ashworth j...@baylink.com writes:
- Original Message -
From: Doug Barton do...@dougbarton.us
Now OTOH if someone wants to demonstrate the value in having a
publication channel for TLD DNSKEYs outside of the root zone, I'm
certainly willing to listen. Just be forewarned that you
Wayne E. Bouchard w...@typo.org writes:
Codes are usually defined in one of two ways... Either cannot be
above the building parapet or cannot be visible from the street
below (which allows you to position a stant at the center of the roof
so you can clear the parapet) but when talking to
Bill Lewis ble...@hottopic.com writes:
What is everyone using for enterprise grade wireless authentication for
simple public access (i.e. users that are non-employee that need
internet access (non-PCI) while in your building). Obviously I will hang
this off a DMZ switch outside of my private
Jon Lewis jle...@lewis.org writes:
This Can't End Well.
Why not? As people shift from watching broadcast channels to
streaming content and look to shut off their cable TV service, but
keep internet, the cable co's are just going to have to raise internet
prices to compensate. I can see a
George Bonser gbon...@seven.com writes:
-Original Message-
From: Bret Clark
Sent: Friday, December 10, 2010 7:08 AM
To: nanog@nanog.org
Subject: Re: BGP multihoming question.
On 12/10/2010 10:01 AM, Dylan Ebner wrote:
3. You cannot trust the second isp to advertise the SWIP
mikea mi...@mikea.ath.cx writes:
On Thu, Dec 09, 2010 at 06:26:30PM +, Dobbins, Roland wrote:
On Dec 10, 2010, at 1:19 AM, Michael Smith wrote:
front lines of this cyberwar?
Warfare isn't the correct metaphor.
Espionage/covert action is the correct metaphor.
Low intensity
Kevin Oberman ober...@es.net writes:
From: valdis.kletni...@vt.edu
From: valdis.kletni...@vt.edu
Date: Fri, 03 Dec 2010 20:00:15 -0500
On Fri, 03 Dec 2010 14:24:16 PST, Leo Bicknell said:
It is speculated that no later than Q1, two more /8's will be allocated,
triggering a policy
Owen DeLong o...@delong.com writes:
On Nov 30, 2010, at 5:32 AM, Christopher J. Pilkington wrote:
Anyone know where I can buy cage nuts and rack screws locally
near SAVVIS DC3 in Sterling, VA? They don't seem to have a
local supply here, and somehow the racks we bought came with
a 2:1
Paul is pretty clueful; I think he was asking for specifics as to what
the layer 8/9 issues are at Equinix, rather than an explanation of
what layer 8 and 9 means.
Fly Fast,
-r
Justin Horstman justin.horst...@gorillanation.com writes:
8 users
9 politics and policies
-Original
George, Wes E [NTK] wesley.e.geo...@sprint.com writes:
Sprint and Qwest, I know you're guilty.
Bill, I know that you mean well and you're just trying to push IPv6
deployment, and sometimes a little public shame goes a long way, but in the
future, before you call my company out in public
Gary Baribault g...@baribault.net writes:
OK, I haven't taken it back out of the box, but anyone still have 8
bit ISA Arcnet with thin coax?
Sorry bro, only Farallon PhoneNet and Gatorboxes here.
back to the shadows
-r
1 - 100 of 183 matches
Mail list logo