Hi,
We are using the net-snmp version 5.1.2. any one can help me
about what is the
Latest release of this and where can I found the change log
of the latest release.
Thanks Regards,
Abdul Rasheed.
On Tue, 2005-11-08 at 22:43 -0600, Matthew Boehm wrote:
The only other option I could think of was to add in SNMP code into the
app. Then I could query the app directly and execute functions inside the
app. My only problem with this solution is that I would not be able to
re/start an
On Tue, 2005-11-08 at 11:34 -0800, IT wrote:
I've read the how do I add MIB files.
And installed the mib files here:
http://www.assure24.com/databases/snmp-mib/private/Compaq/
(1.3.6.1.4.1.232. ...)
But I have been unable to query anything but the
defauult SNMP-SIM::sys* values.
That
On Tue, 2005-11-08 at 13:39 -0800, manik chopra wrote:
does net-snmp supports 802.11 MIB ??
No.
I believe that an implementation was submitted the patches
tracker, but it's never been included within the main agent,
and I've no idea how complete or portable it is.
Suck it and see.
Dave
On Wed, 2005-11-09 at 09:56 +0530, [EMAIL PROTECTED] wrote:
We are using the net-snmp version 5.1.2. any one can help me about
what is the Latest release of this
The latest release of the 5.1.x line is version 5.1.3.1
We are (hopefully) close to releasing 5.2.2, and just gearing
up for release
On Wed, 2005-11-09 at 09:59 +0530, Ramachandrappa, Nataraju
Karidasarahalli wrote:
If I send the snmpwalk command I am not getting the
values correctly. (i.e. I have given IpAddress value is
15.106.208.48 but I am getting the different value).
How are you setting this value, and what
Hi,
I
am trying to perform a configure which will included embedded perl
support.
I am running on a
intel pentium with redhat 9.0. I have net-snmp
srcnet-snmp-5.3.pre2
I perform the
configure as follows:
./configure --enable-embedded-perl --enable-shared
The config.log then
shows
Matthew Boehm [EMAIL PROTECTED] 11/08/05 11:43 PM
Hey gang,
snip
Any thoughts? Suggestions? Anything would be greatly appreciated.
Thanks,
Matthew
Have you tried cfengine? I don't know if that would work in
your particular instance, but it just might.
Paul
Andy Pearce wrote:
I am trying to perform a configure which will included embedded perl
support.
I am running on a intel pentium with redhat 9.0. I have net-snmp
srcnet-snmp-5.3.pre2
I perform the configure as follows:
./configure --enable-embedded-perl --enable-shared
The
Hansjörg Rohrer wrote:
I'm searching information about howto port net-snmp to uCLinux.
Start with http://www.freesnmp.com/net-snmp/faqs/#cross and the list
archives.
+Thomas
--
Thomas Anders (thomas.anders at blue-cable.de)
---
[ First - *please* don't mail me privately, without copying
any responses to the mailing list. I don't have the time
or inclination to offer private, unpaid, SNMP consultancy.
Keep discussions to the list, where others can both learn
and offer advice. Thanks. ]
On Fri,
Hi,
I think you are access the data from the table.
If u r access the data from the table u have to give snmpwalk -v 2c -c
public localhost tablename.
Thanks
nataraju
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Axel
Thimm
Sent: Wednesday, November
Hi all,
is it possible to load (when rebuilding net-snmp with option with mibs=...)
all DISMAN mibs. In the folder there are only SCHEDULE and SCRIPT DISMAN
mibs)
More generaly where is possible to find something about DISMAN deployment ?
is DISMAN really implemented and used ? could anybody
[ First - *please* don't mail me privately, without copying
any responses to the mailing list. I don't have the time
or inclination to offer private, unpaid, SNMP consultancy.
Keep discussions to the list, where others can both learn
and offer advice. Thanks. ]
On Wed,
- Original Message -
From: jdx [EMAIL PROTECTED]
To: taner memet ali [EMAIL PROTECTED]; net-snmp-users
net-snmp-users@lists.sourceforge.net
Sent: Tuesday, November 08, 2005 4:51 PM
Subject: Re: Mib2c /Win32
Well, thank you for your first answer ;
for I could not find the files, I've
jdx wrote:
http://prdownloads.sourceforge.net/net-snmp/net-snmp-5.2.2.pre1-1.win32.exe
)
No mfd-top.m2c file (In Linux tar file, they are in:
./local/mib2c-conf.d/* = where to copy them in Windows tree ?
The folder is missing in the binary. I will add it for the next
release. Try:
md
The first question is why my newly installed snmpd returns noWriteable
on read-write variables(maybe i misconfigured something), e.g.
if my rwcommunity is 'mycomm' and it is restricted to the loopback
address and has no other restrictions
The access defined in the MIB is the maximum access,
On Tue, 25 Oct 2005 11:34:26 +0100 Paul wrote:
PD I am using the array-user template. [...]
PD When I do a Get on the rest of the columns in the row I get values such as
PD zero length hex strings and 0 for the integers etc. instead of what I
PD think I should retrieve i.e. noSuchInstance.
The
On Wed, 26 Oct 2005 16:39:20 +0530 Ravi wrote:
RK +-- -R-- IpAddr dnsIPAddress(2)
RK [...]
RK /* Add the Date for the First Row
RK */
RK netsnmp_set_row_column(row, 2, ASN_IPADDRESS,
RK 16.138.56.91http://16.138.56.91/,
RK 16);
An IpAddress is a 4 byte integer, not a string.
--
NOTE: messages
On Thu, 27 Oct 2005 22:31:13 -0500 Les wrote:
LM On Sat, 2005-10-22 at 01:41, Wes Hardaker wrote:
LM 5.2.2.rc2 is now available on the SourceForge download servers.
LM Please give it a whirl. See the ChangeLog enclosed for the few bugs
LM we've fixed in the last week.
LM
LM Should the
On Mon, 17 Oct 2005 09:53:34 -0400 Ben wrote:
BZ So, my question is along the lines of: Do I need to run mib2c and then
BZ create my own interface code to read / set wireless paramters based on
BZ the MIB
yes, exactly.
--
NOTE: messages sent directly to me, instead of the lists, will be deleted
Thank you Alex for answer about build tool,
I / - your configuration advice is working, but
II / - using mib2c.mfd.conf still mistake
(and thank you for your later explanations about shell.bat)
I /--
I had began to get it working with a first solution (partially),
but yours is
support:
Im attempting to use download your net-snmp tool for solaris but im not
having any luck.
Im trying to download from mirror site
ftp://ftp.freesnmp.com/mirrors/net-snmp/net-snmp-5.1.2-SunOS_5.9_sun4u.tar.gz
but get 550 errors. Please advise.
thanks
Brian Mutcherson
Im attempting to use download your net-snmp tool for solaris but im not
having any luck.
Im trying to download from mirror site
ftp://ftp.freesnmp.com/mirrors/net-snmp/net-snmp-5.1.2-SunOS_5.9_sun4u.tar.
gz
but get 550 errors. Please advise.
Try
I'm using v5.1.1 (soon to upgrade to v5.2.2) and I have a sub-agent
which stores data in a persisent store (/var/net-snmp/my-subagent.conf).
In my subagent, I have:
//
// Handle persistent storage of per-port link up/down trap enable
// The
This is getting pretty frustrating actually the more I use the various
commands. The config files should allow me to set my own defaults
but shouldn't lock me into those choices. Now I can't get more
verbose output unless I comment out or rename my snmp.conf file first.
If I were to come up with
Bradford Ritchie wrote:
This is getting pretty frustrating actually the more I use the various
commands. The config files should allow me to set my own defaults but
shouldn't lock me into those choices. Now I can't get more verbose
output unless I comment out or rename my snmp.conf file
Hi,
I noticed that all the net-snmp v5.3pre1 .dsp files (in the
subdirectories of the win32 directory) that I have checked so far have
an extra carriage return at the end of each line. The hex values at the
end of each line are 0d 0d 0a. This is causing notepad to toss out the
0d 0d 0a at
Hi,
We have a requirementto support trap
handling in our project.
Requirement is whenever a trap is received a
function should be called which extracts the community string and performs some
operation.
With were able to do it with
scotty(opening a listener session and binding it with a
HI Team,
How do I update the mib scalar and table variables dynamically?
Thanks in advance
Nataraju
---
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be
Quoting Dave Shield [EMAIL PROTECTED]:
[ First - *please* don't mail me privately, without copying
any responses to the mailing list. I don't have the time
or inclination to offer private, unpaid, SNMP consultancy.
Keep discussions to the list, where others can both learn
Hello All,
I have used the mib2.create-dataset.conf configuration for generating
the source code (i.e mib2c -c mib2c.create-dataset.conf TABLENAME). The
following code generated.
void
initialize_table_stbDNSTable(void)
{
static oid stbDNSTable_oid[] =
{ 1, 3, 6, 1, 4, 1, 11,
32 matches
Mail list logo