Thanks everyone I will be putting this into practice asap to save my fingers.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Carl J. Bauman
Sent: Tuesday, March 23, 2004 12:13 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] xml and grep
[EMAIL PROTECTED]
Hi All
I need to use my scanner and despite my best attempts I can't get Xsane
to work under MDK10.
When ever I try to use it I get all kinds of silly errors (The scanner
worked last week under 9.2).
What I need is an alternative to Xsane that I can try to get working.
Anybody seem anything
Hi All,
I have just fixed my sound so I thought I'd share exactly what I did incase
anyone else is still struggling.
I'm running Mandrake 10 CE on a Vaio Laptop. The install went perfectly but
KDE crashed instantly and continued to do so until I switched off the sound
using Kcontrol via IceWM.
Hi,
I'm installing MDK10 Community on a GX100 Dell box. It's a P3 with a
Intel 810 Video card.
Will the video card work?
It didn't on die RC1.
They say its non public video drivers?
It's a onboard screen card and it works very nice.
Regards,
Jargon
'To mess up a Linux box, you need to work at
well I am not sure what you have done so far.
I found a directory called camera under /mnt/camera
I mount it and all is well.
That is in my Fedora partition.
At first I played around like you are but now I don't have to at all.
Maybe Fedora has an automount for usb??
I couldn't get MD 10 to
On Tue, 2004-03-23 at 13:26, Chris wrote:
Don't know Stephen, any way I can find out?
Tune the system - especially the HD settings; reboot.
stephen kuhn - owner
==
illawarra computer services
a kuhn media australia company
http://kma.0catch.com
On Tuesday 23 Mar 2004 07:23, John Wilson wrote:
The second issue is more troubling. When setting up internet connection
sharing the wizard fscks all networking. I can always reach the internet
before I set it up but not after. I admit I haven't had the time yet to
look too deeply into it
Dan Gordon wrote:
On Mon, 22 Mar 2004 19:30:29 +
John Richard Smith [EMAIL PROTECTED] wrote:
Dan Gordon wrote:
Yes its definetly in a fixed interval but is a longer time than 15
minutes, more like an hour but I'm not sure exactly. I have turned
off power control in kde both as user
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 23 March 2004 00:33, Chuck Mattsen wrote:
Okay, I've obviously still have a lot of learning to do before I
understand this process, as I'm at a loss at this point. Perhaps
it's more difficult and/or undoable because I'm dealing with
Wel, It works 100% on the box. Was just wandering...
:)
-Original Message-
From: Tobias Cloete [mailto:[EMAIL PROTECTED]
Sent: 23 March 2004 11:32 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Intel Video Card
Hi,
I'm installing MDK10 Community on a GX100 Dell box. It's a P3 with a
Intel
Hi there,
I am just curious about how you guys clean the LCD of your laptops, or LCD
monitors. Last time I did that with a soft cloth. Any other ways? Many
thanks.
Bests,
QingHua
Want to buy your Pack or Services from MandrakeSoft?
Go to
I have some programs XMMS, kmail, konqueror that apparantly have some
bad config files. I have reinstalled them but they are still not good.
How can I reinstall and clear everything assosciated with that file from
the computer or at least overwrite everything.
Regards;
Hoyt
Stephen Kuhn wrote:
On Tue, 2004-03-23 at 09:51, Wilson, Jack wrote:
I just installed a Mandrake 8.2 server (have to use 8.2) and selected
the mail and server options during install. Everything installed and I
rebooted and checked in Mandrake Control Center and checked services and
postfix
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 23 March 2004 07:05 pm, Hoyt Bailey wrote:
I have some programs XMMS, kmail, konqueror that apparantly have some
bad config files. I have reinstalled them but they are still not good.
How can I reinstall and clear everything
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I get this CD from a Linux magazine consisting KDE3.2.
Can I update my KDE3.1 using it? How?
TIA.
- --
Fajar Priyanto | Reg'd Linux User #327841 | http://linux.arinet.org
19:10:58 up 49 min, Mandrake Linux release 9.2 (FiveStar) for i586
I used the mplayer rpm found at the penguin liberation front,
http://plf.zarb.org/
--- On Tue 03/23, =?iso-8859-1?q?Tadimeti=20Keshav?= [EMAIL PROTECTED] wrote:
From: =?iso-8859-1?q?Tadimeti=20Keshav?= [mailto: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Tue, 23 Mar 2004 07:32:58
On Tuesday 23 March 2004 04:05 am, Hoyt Bailey wrote:
I have some programs XMMS, kmail, konqueror that apparantly have some
bad config files. I have reinstalled them but they are still not good.
How can I reinstall and clear everything assosciated with that file from
the computer or at least
On Tuesday 23 Mar 2004 12:05, Hoyt Bailey wrote:
I have some programs XMMS, kmail, konqueror that apparantly have some
bad config files. I have reinstalled them but they are still not good.
How can I reinstall and clear everything assosciated with that file from
the computer or at least
On Monday 22 March 2004 10:35 pm, fengler wrote:
Hi,
I just installed Mandrake 10 community edition.
Now I got the following problem:
I installed with mode Paranoid so root should be generally unable to login
XSession or console.
I don't think that paranoid level prevents root login
On Tuesday 23 Mar 2004 12:31, Derek Jennings wrote:
On Tuesday 23 Mar 2004 12:05, Hoyt Bailey wrote:
I have some programs XMMS, kmail, konqueror that apparantly have some
bad config files. I have reinstalled them but they are still not good.
How can I reinstall and clear everything
On Tuesday 23 Mar 2004 H:32, Tadimeti Keshav wrote:
mplayer plays .WMA files fine
make sure you have also got the codecs for it
and put them into your /usr/lib/win32 dir
http://www.mplayerhq.hu/homepage/design6/news.html
Hi
I have MDK 9.1, I am not able to play .WMV movie
files. Has any one
All,
How do I tell the Monitor to change Screen
Resolution Refresh Rates? It's stuck at 460x480.
I'am looking at a big desktop through a little window.
That I push around with mouse.
Running MandrakeMove on a Dell P4 MM doesn't have drivers
for the Intel 82865gG
On Tue, 23 Mar 2004 10:00:18 +
John Richard Smith [EMAIL PROTECTED] wrote:
I don't think it's that simple. The TCO symbol means the monitor
itself can do this, I know in theory the bios ought to shut it down
if you can set it as such not all bioses can.
I think windblows has some other
Hi
I seem to be having problems with my emails being rejected by loads of
different people. It would seem somebody has reported my IP as being
that of a spammer. I get this message:
Connected to 137.205.128.7 but sender was rejected. Remote host said:
550 5.7.1 Rejected: 82.36.99.231 listed at
Dan Gordon wrote:
On Tue, 23 Mar 2004 10:00:18 +
John Richard Smith [EMAIL PROTECTED] wrote:
I don't think it's that simple. The TCO symbol means the monitor
itself can do this, I know in theory the bios ought to shut it down
if you can set it as such not all bioses can.
I think windblows
In my local network, i use linux as a main server installed with samba. And
there is windows 2k printer server, which is actually a client with shared
printer (network printer) and also there is another linux client (mandrake).
All the clients has been connected under the same samba domain.
the
Hi, everybody, I just installed mdk 10...it seems to work very well, I
havent tested it very hard yet, though...
My problem is that Windows spoiled me very much as an ex-windows user I
found spanish corrector in Word as an excellent tool, but I cannot see it in
openoffice package..does
Inhabitant of Zion wrote:
Hi All
I need to use my scanner and despite my best attempts I can't get Xsane
to work under MDK10.
When ever I try to use it I get all kinds of silly errors (The scanner
worked last week under 9.2).
What I need is an alternative to Xsane that I can try to get working.
Go to openoffice.org and download the dico installer (it is a OOo file
that spawns this nice installer).
OOo website has mirror sites for all languages available.
Also check out StarOffice if your are educ people (free for us!).
Hi, everybody, I just installed mdk 10...it seems to work very
On Monday 22 March 2004 10:35 pm, fengler wrote:
Hi,
I just installed Mandrake 10 community edition.
Now I got the following problem:
I installed with mode Paranoid so root should be generally unable to login
XSession or console.
Perhaps this document will help you understand how msec
test
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
I had the same problem with a friend of mine who wanted to try Linux. I
also had a spare harddrive that had linux already on it. We took his
out and put mine in and it would start to boot and then just stall.
Couldn't get into the BIOS at all. We put his old disk in and it was
recongized
just from this post..it works with windows and not with Linux..Bioses
can be tied to windows and as part of the MS OEM license that is what
most large computer vendors do to get the rock bottom pricing on
windows. Gateway only supports windows and they do not and will not
support Linux on
I am looking for a formula 1 game. Could somebody here please help me?
http://www.linuxgames.com/xrally/
...there are other games out there, but you might want to try to search
them out; heaps of RPG's and the likes - and FPS's - as well as being
able to use a version of WINE made by
On Tuesday 23 March 2004 07:47 am, Marc wrote:
I had the same problem with a friend of mine who wanted to try Linux. I
also had a spare harddrive that had linux already on it. We took his
out and put mine in and it would start to boot and then just stall.
Couldn't get into the BIOS at
On Tue, 23 Mar 2004 13:34:13 +
John Richard Smith wrote:
Well maybe there is a way then.
There is the setterm command,
try looking at settern --help, or man setterm
and see if any of those work ?
Just a possibility
Maybe setterm -powersave off
Thanks will let you know if this
Dear All
I am looking for the rpm file for PGP. (Please, notice that I am not
meaning GPG.) Could somebody here please help me?
Thank you a lot in advance!
Paul
Want to buy your Pack or Services from MandrakeSoft?
Go to
Just in case this dongle gets through. Sorry about this.
Been having trouble with my IP being reported as a spam relay.
All my mails to this list have been returned undelivered.
Think I have sorted it now - just need to make sure.
--
John Willby
Registered Linux user number 321644
ICQ:
On Tuesday 23 March 2004 10:03 am, William Warren wrote:
just from this post..it works with windows and not with Linux..Bioses
can be tied to windows and as part of the MS OEM license that is what
most large computer vendors do to get the rock bottom pricing on
windows. Gateway only supports
On Tuesday 23 March 2004 08:36 am, Inhabitant of Zion wrote:
Hi
I seem to be having problems with my emails being rejected by loads of
different people. It would seem somebody has reported my IP as being
that of a spammer. I get this message:
Connected to 137.205.128.7 but sender was
On Tuesday 23 March 2004 10:08 am, Aron Smith wrote:
Also if the system that you are talking about Moureen is about 3 years
old Gateway could have a BIG problem here, possibly a class action law
suit. If they want to sell third rate hardware to customers that do not
know any better
On Wed, 2004-03-24 at 04:44, Bryan Phinney wrote:
On Tuesday 23 March 2004 08:36 am, Inhabitant of Zion wrote:
Hi
I seem to be having problems with my emails being rejected by loads of
different people. It would seem somebody has reported my IP as being
that of a spammer. I get this
Marc wrote:
Gateway could have a BIG problem here, possibly a class action law suit.
It's about the only arguement you have, maybe a class action is
possible, since in effect it's a restrictive practice bound to result in
eliminating outsiders, but who will sue Gateway ? Costs millions, and
This is on 9.2, before and after updates. I've edited /etc/lilo.conf to
add hdc=ide-scsi.
If I try to burn an iso image, in the GCombust results window I see:
/usr/bin/cdrecord: Operation not permitted: WARNING: Cannot set
RR-scheduler
/usr/bin/cdrecord: Permission denied: WARNING: Cannot set
the only time you get the error is when trying linux from what i can
tell..which as i stated before is not supported by gateway. No analogy
is going to convince a judge otherwise. you can try this court case but
i do not think you are going to get anywhere..just my .02
Marc wrote:
On Tuesday
Dear All
I am looking for a pgp program able to produce self-extracting archives.
Does somebody here know whether kgpg is a program with this feature?
Thank you a lot in advance!
Paul
Want to buy your Pack or Services from MandrakeSoft?
Direct root Login yes yes yes no no
I have read that page before and was right in saying root is generally
not able to login
and I asked for help with the logfile not with permissions.
However, first, this is not the behaviour it should be and second the
William Warren stated:
the only time you get the error is when trying linux from what i can
tell..which as i stated before is not supported by gateway.
A point to note here; when Gateway says that third-party software is not
supported, it simply means that they will not provide technical
Well, the reason for preventing direct root logins is following thing.
You always can log which user account was spoofed to gain access and
then a the root account has to be hacked. So this means two barriers.
However, I am not an expert about security. I just read that on the same
page, once
Newly installed 10 CE won't shutdown/poweroff cleanly - using either
the root terminal shutdown process or the KDE logout button I get
as far as this...
uhci_hcd :00:11.2: USB bus 1 deregistered
... and then it hangs.
I know this is a known issue, and apparently there is a kernel fix
on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Op dinsdag 23 maart 2004 08:23, schreef John Wilson:
The second issue is more troubling. When setting up internet connection
sharing the wizard fscks all networking. I can always reach the internet
before I set it up but not after.
Hallo John,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On March 23, 2004 11:45 am, Margot wrote:
Newly installed 10 CE won't shutdown/poweroff cleanly - using either
the root terminal shutdown process or the KDE logout button I get
as far as this...
uhci_hcd :00:11.2: USB bus 1 deregistered
...
Hello folks,
this is not a Mandrakespecific question per se but still I am wondering im VMWare is
capable of using an already existing installation of Windows 2000 on the computer and
use it as a virtual machine.
Cheers
Anders
Want to buy
Nope.
Miark
On Tue, 23 Mar 2004 21:05:56 +0100, Anders wrote:
this is not a Mandrakespecific question per se but still I am
wondering im VMWare is capable of using an already existing
installation of Windows 2000 on the computer and use it as a
virtual machine.
Bryan Phinney wrote:
snip
Yes, I understand the concept of not allowing root login and why, I just don't
think that it applies to console logins. Having a standard account
accessible remotely eases the barrier for someone to brute force hack the
box, however, that usually doesn't apply to
On Tuesday 23 March 2004 03:35 am, Stephen Kuhn wrote:
On Tue, 2004-03-23 at 13:26, Chris wrote:
Don't know Stephen, any way I can find out?
Tune the system - especially the HD settings; reboot.
Stephen, I hate to sound like a smart ass but how will that take care of the
problem, if it is
On Tue, 23 Mar 2004 18:05:51 +, RichardA [EMAIL PROTECTED]
wrote:
This is on 9.2, before and after updates. I've edited /etc/lilo.conf
to add hdc=ide-scsi.
If I try to burn an iso image, in the GCombust results window I see:
/usr/bin/cdrecord: Operation not permitted: WARNING: Cannot
On Tuesday 23 Mar 2004 22:14, di di wrote:
After inserting the first cd of mdk 10 communiy in my 12x cd rom of laptop
presario 1275 -manufactured in 1998- the boot starts, ...but after doing
clic over installing start loading the program and the message of looking
for usb devices comes, then
Hi All,
I'm trying to install Mandrake 9.1 for Apple PPC on a PPC 7600 604 12
mhz 48mb 2gb
the installation keeps ending with a kernel panic:
mesh: double mda start
I'm doing a text install from CD
The installer doesn't recognize the CD by itself, I need to choose a
driver which is called
On Tue, 23 Mar 2004 18:05:51 +, RichardA [EMAIL PROTECTED]
wrote:
This is on 9.2, before and after updates. I've edited /etc/lilo.conf
to add hdc=ide-scsi.
If I try to burn an iso image, in the GCombust results window I see:
/usr/bin/cdrecord: Operation not permitted: WARNING: Cannot
My synaptics driver for my touchpad will work after a fresh reboot,
because I added evdev to modules.preload. But as soon as I plug my
regular mouse in, the touchpad will cease to work until I reboot again.
I try modprobe evdev, but there is no change. My XFree86 config is
correct, because it
I had the same problem with my Intel 82855 chip. Check out this link
from Intel
http://support.intel.com/support/notebook/centrino/sb/cs-006059-prd955.htm
Click on linux drivers and download and install the .rpm file. The
follow the X -configure instructions in the Readme. This should get your
On Tuesday 23 March 2004 03:29 pm, Miark wrote:
Nope.
Actually, yes, but there is some fancy footwork you have to do. This article
may help you get started learning about whst you have to do.
http://www.vmware.com/support/ws4/doc/disks_dualmult_ws.html
And you need to read this if the
On Tuesday 23 March 2004 11:03 am, William Warren wrote:
just from this post..it works with windows and not with Linux..Bioses
can be tied to windows and as part of the MS OEM license that is what
most large computer vendors do to get the rock bottom pricing on
windows. Gateway only supports
On Tuesday 23 March 2004 08:01 pm, Marc Resnick wrote:
My synaptics driver for my touchpad will work after a fresh reboot,
because I added evdev to modules.preload. But as soon as I plug my
regular mouse in, the touchpad will cease to work until I reboot again.
I try modprobe evdev, but there
Greg Meyer wrote:
On Tuesday 23 March 2004 08:01 pm, Marc Resnick wrote:
My synaptics driver for my touchpad will work after a fresh reboot,
because I added evdev to modules.preload. But as soon as I plug my
regular mouse in, the touchpad will cease to work until I reboot again.
I try modprobe
Hi,
When I boot into LM10 I have been getting a 'KMail can't start because it's
already on a process as shown in the lock file' type message. I initially
tried to 'kill' the process but it isn't acutally running. So I just delete
the lock file. I can't understand why this should be happening
On Tue, 23 Mar 2004 21:24:41 -0500
Carroll Grigsby [EMAIL PROTECTED] wrote:
On Tuesday 23 March 2004 11:03 am, William Warren wrote:
just from this post..it works with windows and not with
Linux..Bioses can be tied to windows and as part of the MS OEM
license that is what most large
I think the problem is with your ISP been consider a spammer, not you.
Bye
El mar, 23-03-2004 a las 09:36, Inhabitant of Zion escribió:
Hi
I seem to be having problems with my emails being rejected by loads of
different people. It would seem somebody has reported my IP as being
that of a
This is an automated weekly message mainly intended
for people new to Mandrake's Newbie List.
=
In This Message
=
1. General Mailing list info
2. Leaving the list
3. List news
4. List Etiquette
5. Twiki
1.
On Tue, 2004-03-23 at 14:05, Anders Lind wrote:
Hello folks,
this is not a Mandrakespecific question per se but still I am wondering
im VMWare is capable of using an already existing installation of
Windows 2000 on the computer and use it as a virtual machine.
Cheers
Anders
Yes, it
Nothing happens when /etc/rc.d/init.d/pcmcia start
I have checked and cardmgr is not running and it syslogs a message no sockets
found.
I tryed the 2.6.4 kernel and the same problem exsists.
Machine specs
Dell Inspiron 8200
2.0 G P4-M
512M ram
40G hard drive
dvd/cdrw
2 batteries
ATI Radeon
Charlie Mahan wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On March 23, 2004 11:45 am, Margot wrote:
Newly installed 10 CE won't shutdown/poweroff cleanly - using either
the root terminal shutdown process or the KDE logout button I get
as far as this...
uhci_hcd :00:11.2: USB bus 1
I think the problem is with your ISP been consider a spammer, not you.
Yes somebody told me that many people are blocking my ISP en-bloc. I
beleive its because they have a very poor security policy (I suspect
they have been used for relaying spam?) and the amount of spam I get in
my official
74 matches
Mail list logo
