Congrats!
While I don’t know what \mi is, it’s apparently protected. Maybe there’s
a hint in the log.
Am 25.05.22 um 19:39 schrieb Stefan Nedeljkovic:
Actually I got lucky just now:
\definefontalternative[md]
\definefontalternative[mc]
Works just fine. Thank you for your suggestion
Actually I got lucky just now:
\definefontalternative[md]
\definefontalternative[mc]
Works just fine. Thank you for your suggestion Henning!
On Wed, May 25, 2022 at 7:35 PM Stefan Nedeljkovic
wrote:
> mtxrun --script fonts --list --all --pattern=Custodia
> identifier
mtxrun --script fonts --list --all --pattern=Custodia
identifier familyname fontname filename
subfont instances
custodiabold custodia custodiabold
Custodia-Bold.ttf
custodiabolditalic custodia custodiabolditalic
Ah, sorry, didn’t know that. I can’t find an error in your code, but I
don’t have the (commercial) font to test. What’s the output of the
mtxrun font lookup?
Did you try a different shortcut from "mi"?
Hraban
Am 25.05.22 um 18:44 schrieb Stefan Nedeljkovic:
It doesn't work for medium weights,
I have problems setting up the grid in question. I cannot seem to configure
the grid spacing properly, despite combing through the "details" manual.
Could you help me configure the grid?
On Wed, May 25, 2022 at 6:24 PM Stefan Nedeljkovic
wrote:
> Thank you very much Wolfgang, that solved the
It doesn't work for medium weights, as it is not standard. I took my
solution from Wolfgang, here:
https://tex.stackexchange.com/questions/303648/context-font-weights
On Wed, May 25, 2022 at 6:32 PM Henning Hraban Ramm via ntg-context <
ntg-context@ntg.nl> wrote:
> Hi Stefan,
>
> I never used
Hi Stefan,
I never used \definebodyfont but either \definefontfamily or typescripts
with \definefontsynonym.
Did you try \definefontfamily[custodia][rm][Custodia] ?
https://wiki.contextgarden.net/Command/definefontfamily
Hraban
Am 25.05.22 um 18:20 schrieb Stefan Nedeljkovic via
Thank you very much Wolfgang, that solved the problem.
On Wed, May 25, 2022 at 4:01 PM Wolfgang Schuster <
wolfgang.schuster.li...@gmail.com> wrote:
> Stefan Nedeljkovic via ntg-context schrieb am 25.05.2022 um 13:35:
> > Dear list,
> >
> > This is a follow-up question on my previous question
Dear list,
I'm trying to set up Custodia in LMTX, but the custodiasemibolditalic won't
show up. It shows up regularly when I run mtxrun --script fonts --list
--all --pattern=Custodia
I'm attaching the output for reference. Any help would be appreciated.
Sincerely,
Stefan
Stefan Nedeljkovic via ntg-context schrieb am 25.05.2022 um 13:35:
Dear list,
This is a follow-up question on my previous question about Jean-Luc
Doumont and his grid layouts. This time I have concrete questions. I
reverse engineered his slide (slide_grid_overlay.pdf). All his units are
Dear list,
This is a follow-up question on my previous question about Jean-Luc Doumont
and his grid layouts. This time I have concrete questions. I reverse
engineered his slide (slide_grid_overlay.pdf). All his units are based on
inches, because the inch is an integer multiple (72) of the TeX
Patrick wrote:
Hi all,
the garden maintainers have moved the command reference from texshow-web
(
http://texshow.contextgarde.net)
to the wiki, below the page
http://wiki.contextgarden.net/Category:Reference/en
This means, everybody can update the command reference now! Hooray!
This is fantastic news, and it looks great! Thanks Patrick.
You're welcome! Lots of people have encouraged me to do so, so any input is
welcome!
If the 'volunteers' are REALLY keen they could also change examples so that
they have the following form:
context source=yes text=yields
Hi all,
the garden maintainers have moved the command reference from texshow-web
(http://texshow.contextgarde.net) to the wiki, below the page
http://wiki.contextgarden.net/Category:Reference/en
This means, everybody can update the command reference now! Hooray!
The contents has been
Patrick Gundlach wrote:
Thanks for your help!
A great big thank you! to you!
Best wishes,
Taco
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist :
On 11-4-2010 3:45, Patrick Gundlach wrote:
Hi all,
the garden maintainers have moved the command reference from texshow-web
(http://texshow.contextgarde.net) to the wiki, below the page
http://wiki.contextgarden.net/Category:Reference/en
This means, everybody can update the command reference
Help needed: texshow-web/command referenc
Gladly started with this, but two questions arose:
1) What is the standard? What formatting errors too look for? Should
they be evident or subtle?
2) Should the description be added before removing Reference_Cleanup?
Foe example, \but wiki page
Am 11.04.10 19:13, schrieb Vyatcheslav Yatskovsky:
2) Should the description be added before removing Reference_Cleanup?
Foe example, \but wiki page looks meaningless without the descrption.
http://wiki.contextgarden.net/Reference/en/but
ConTeXt has no \but command although i think there was
Hi Willi and all NTG members,
I recently asked about if I can work off my annual NTG membership fee.
Now I see great possibility for this.
I can take an obligation to clean up *all*
http://wiki.contextgarden.net/Category:Reference_Cleanup
concerning
Thank you for answer, Wolfgang.
ConTeXt has no \but command although i think there was one in the past.
I'm afraid you are wrong. See updated wiki page:
http://wiki.contextgarden.net/Reference/en/but
P.S. What about to wikify \show command itself? Or it is not ConTeXt
command?
Regards,
Am 11.04.10 20:16, schrieb Vyatcheslav Yatskovsky:
Thank you for answer, Wolfgang.
ConTeXt has no \but command although i think there was one in the past.
I'm afraid you are wrong. See updated wiki page:
http://wiki.contextgarden.net/Reference/en/but
It's also available for itemize:
On 11.04.2010 22:34, ntg-context-requ...@ntg.nl wrote:
Thank you for answer, Wolfgang.
ConTeXt has no \but command although i think there was one in the past.
I'm afraid you are wrong. See updated wiki page:
http://wiki.contextgarden.net/Reference/en/but
It's also available for itemize:
Am 2010-04-11 um 21:37 schrieb Vyatcheslav Yatskovsky:
Don't understand how to use it. Without \definerreference there is
no difference form ordinary \item, but \definerreference gives an
error.
\setupinteraction
[state=start]
%\definerreference[content][] %gives error
\starttext
You can find useful to look here:
http://wiki.contextgarden.net/Mac_Installation
MacTeX is typically a no trouble installation
Best
-a-
On 8 Sep 2007, at 07:21, David Rogers wrote:
On Fri, 07 Sep 2007 18:53:49 +0200, Hans Hagen wrote:
Francis Derive wrote:
Bonjour Mesdames,
Francis Derive wrote:
Bonjour Mesdames, Mesdemoiselles, et Messieurs,
That means I need your help.
I feel quite an idiot, but I don't know what to do with - say the
cont-tmf folder I downloaded for ma Mac Os X Tiger : looking inside, I
don't see any application...
Started reading the
Am 2007-09-07 um 18:53 schrieb Hans Hagen:
i forwarded to the context mailing list
For amusement?
BTW on the LilyPond list we get a lot of similar questions of people
who expect a GUI program...
Greetlings from Lake Constance!
Hraban
---
http://www.fiee.net/texnique/
Started reading the doc on your site, created a myfile.tex as yours, but
% context myFile
zsh: command not found: context
use instead:
texexec --pdf myFile.tex (use pdftex but Unicode is not working)
or
texexec --xtx myFile.tex (use Xetex with Unicode but is not working in
On Fri, 07 Sep 2007 18:53:49 +0200, Hans Hagen wrote:
Francis Derive wrote:
Bonjour Mesdames, Mesdemoiselles, et Messieurs,
That means I need your help.
I feel quite an idiot, but I don't know what to do with - say the
cont-tmf folder I downloaded for ma Mac Os X Tiger : looking inside,
Karsten Heymann wrote:
I cannot expect a ready-to-run solution, but any hints or best context
practices would be highly appreciated!
In ConTeXt you can define alternative heads and tocs quite easily, but
the actual setup depends (of course) on the structure of your input
files. Here are
Hi Taco
Taco Hoekwater wrote:
In ConTeXt you can define alternative heads and tocs quite easily, but
the actual setup depends (of course) on the structure of your input
files.
\setuplist
[shortpart,shortchapter]
[numbercommand=\gobbleoneargument,pagenumber=no]
Thanks, that already
Hello,
I'm having a little bit of problem with the document structure of the
project I'm currently typesetting. It's kind of a scientific magazine
that consists mainly of independent articles. The articles use \section
and \subsection and should have their own numbering, as well as for the
Peter Münster wrote:
On Fri, 18 Feb 2005, Hans Hagen wrote:
Peter Münster wrote:
On Thu, 17 Feb 2005, Hans Hagen wrote:
\expanded{\bTR ... \eTR}
table data is collected and processed four times so you need to freeze
the content
can you send me a small sample
Of course:
\newcount\MyVersion
On Mon, 21 Feb 2005, Hans Hagen wrote:
\def\MyMacro#1{%
\getgparameters[XXX][#1]
\global\advance\MyVersion by 1
\bTR \bTR\expanded{\bTD \the\MyVersion \eTD} \expanded{\bTD \XXXDate
\eTD}\eTR
}
Thank you very much, Hans!
In fact, I should have tried just a bit more: I tried
Peter Münster wrote:
On Thu, 17 Feb 2005, Hans Hagen wrote:
\expanded{\bTR ... \eTR}
}
table data is collected and processed four times so you need to freeze
the content
can you send me a small sample
Hans
-
On Fri, 18 Feb 2005, Hans Hagen wrote:
Peter Münster wrote:
On Thu, 17 Feb 2005, Hans Hagen wrote:
\expanded{\bTR ... \eTR}
table data is collected and processed four times so you need to freeze
the content
can you send me a small sample
Of course:
\newcount\MyVersion
Peter Münster wrote:
Hello,
could someone help me please with the following little macro?
Every line in the table should be different, but all are as the last one.
I've tried a lot with commands like \expanded{} or \expandafter etc, but
without results...
Perhaps the only solution is a temporary
Hello,
could someone help me please with the following little macro?
Every line in the table should be different, but all are as the last one.
I've tried a lot with commands like \expanded{} or \expandafter etc, but
without results...
Perhaps the only solution is a temporary file?
On Thu, 17 Feb 2005, Hans Hagen wrote:
\expanded{\bTR ... \eTR}
}
table data is collected and processed four times so you need to freeze
the content
This one of the possibilities, that I've tried, but I get this error:
ERROR: Use of \dododecrement doesn't match its definition.
Peter
38 matches
Mail list logo
