to also define \typeC{...}, but then I will need to
read up how to read code in verbatim and write it to a file.
Aditya%M \logo [VIM] {VIM} % Needed for the title
%D \module
%D [ file=t-vim,
%Dversion=2008.07.15,
%D title=\VIM\ to \CONTEXT,
%D subtitle=Use \VIM
Am 2009-07-02 um 15:56 schrieb Wolfgang Schuster:
I'd like to change the reference table of alternative e a little
bit to fit my logo:
voffset=130mm, % absolute coordinates
hoffset=40mm,
width=20mm, % width of label
It doesn't work in \setupletterstyle[reference][].
Where must I put
Am 03.07.2009 um 13:07 schrieb Henning Hraban Ramm:
Am 2009-07-02 um 15:56 schrieb Wolfgang Schuster:
I'd like to change the reference table of alternative e a little
bit to fit my logo:
[...]
Thank you! Offset works, width doesn't (i.e. stays automatical).
Do you want to change
it will be easy enough, and you don't need to define a proper
label.
I have to check if this can be done (in a good way) and if I like this
fallback method.
So, here we are:
I'd like to change the reference table of alternative e a little
bit to fit my logo:
voffset=130mm, % absolute
enough, and you don't need to define a proper
label.
More questions will follow... I'll try to get my logo at the
right place by myself before...
The module provides a few layers you can use to position your
graphic.
I saw that in the manual and wanted to try it on my own first
just Skype: fiee.visuelle?
More questions will follow... I'll try to get my logo at the right
place by myself before...
I found a simple workaround (but would prefer a clean general solution):
\setupletter[skype][
separator={Skype:}
]
Greetlings from Lake Constance!
Hraban
---
http
questions will follow... I'll try to get my logo at the right
place by myself before...
The module provides a few layers you can use to position your graphic.
\setupletterstyle
[lettermain]
[hoffset=..cm,
voffset=..cm,
symbol={\externalfigure[...]},
state=repeat] % repeat=place
logo at the right
place by myself before...
The module provides a few layers you can use to position your graphic.
I saw that in the manual and wanted to try it on my own first - but
thank you very much!
BTW I tried to come up with measures for Swiss business letters, but
only found some
. telefonnumer=...
More questions will follow... I'll try to get my logo at the right
place by myself before...
The module provides a few layers you can use to position your
graphic.
I saw that in the manual and wanted to try it on my own first - but
thank you very much!
The problem
unknown keys just unchanged? I.e. if I say
\setupletter[
Skype={fiee.visuelle}
]
to get just Skype: fiee.visuelle?
More questions will follow... I'll try to get my logo at the right
place by myself before...
Greetlings from Lake Constance!
Hraban
---
http://www.fiee.net/texnique
On Thu, 25 Jun 2009, Vyatcheslav Yatskovsky wrote:
Thanks for asking. The problem is so simple from PowerPoint view. I want to
place a logo of my academic institution on the front page, above the slide
title. I can guess its x,y coordinates, but cannot understand how to place it
there.
I
Thanks for asking. The problem is so simple from PowerPoint view. I want
to place a logo of my academic institution on the front page, above the
slide title. I can guess its x,y coordinates, but cannot understand how
to place it there.
I know something about overlays, but it seems
Hi @all,
i like to include a logo on the top-right-edge on every page in my Document.
The pagesize is A4, but our printer could not print into the first 5mm from
the borders. Now the Logo get's cut on the top and on the right side while
printing.
I defined my layout like this:
-8
Am 06.04.2009 um 10:19 schrieb Markus Hubig:
Hi @all,
i like to include a logo on the top-right-edge on every page in my
Document.
The pagesize is A4, but our printer could not print into the first
5mm from
the borders. Now the Logo get's cut on the top and on the right side
while
Ahh! Works nice, but now I have this logo just on the first site of my document.
How can I set this to be repeated on every page ... I structured my document
with environment - project - product - component and I've put the layersetup
into my environment file.
- Markus
On Mon, Apr 6, 2009 at 10
Am 06.04.2009 um 11:32 schrieb Markus Hubig:
Ahh! Works nice, but now I have this logo just on the first site of
my document.
How can I set this to be repeated on every page ... I structured my
document
with environment - project - product - component and I've put the
layersetup
into my
\CONTEXT
I couldn't figure out what is wrong.
Smallcaps did not work in start/stopattributes, use \setupsorting[logo]
[style=\tx\WORD]
Wolfgang
___
If your question is of interest to others as well, please add
}
\endgroup \getvalue
{\??so...
l.3 \CONTEXT
I couldn't figure out what is wrong.
Smallcaps did not work in start/stopattributes, use
\setupsorting[logo][style=\tx\WORD]
Thanks. I just switched to abr-02 :)
Aditya
Hi all of you,
After aproving of Taco and Mojca, I announce that I start a repository
of ConTeXt logos:
http://github.com/somenxavi/context-free-designs/
Now it has only the Taco logo that reproduce the contextgarden logo, but
it's open to anyone who wants to put in any logo. Just send
that with the logo and you'll notice the transparent
background with GIMP.
Mojca
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl
En/na Aditya Mahajan ha escrit:
On Sat, 14 Mar 2009, Xan wrote:
Yes, Wolfgang. Now I understand it.
The actually process is:
texexec prova.tex -- prova.pdf and prova-mpgraph.1 (eps file)
generated.
and I see what you said.
So it has transparent background, but why gimp says that eps does
=converted_file.png \
-r100.0 \ (put here whatever number you want)
original_file.pdf
You can try that with the logo and you'll notice the transparent
background with GIMP.
Thanks Mojca for this script. I did the same with gimp with more more
effort (open eps file, gimp says that it should
Xan wrote:
Mojca, how is this script for converting pdf file to (newest) eps? For
seeing if newest eps supports transparency.
This has nothing to do with 'newest eps'. It is to do with the appalling
support for the eps format in the gimp. Eps has had transparant
backgrounds since day one (a
En/na Taco Hoekwater ha escrit:
Xan wrote:
Mojca, how is this script for converting pdf file to (newest) eps?
For seeing if newest eps supports transparency.
This has nothing to do with 'newest eps'. It is to do with the appalling
support for the eps format in the gimp. Eps has had
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You are free to use this code any way you can
\setupcolors[state=start,textcolor=white]
\startMPenvironment[global]
\usetypescript[postscript][ec]
\setupbodyfont[postscript,ss,144pt]
\stopMPenvironment
logo.pdf
Description: Adobe PDF document
Am 14.03.2009 um 16:45 schrieb Xan:
Wolfgang, when I run texexec prova.tex I obtain prova.pdf and prova-
mpgraph.1 Both files have background white and not transparent
background. I don't know how explain it.
Perhaps this
En/na Wolfgang Schuster ha escrit:
Am 14.03.2009 um 16:45 schrieb Xan:
Wolfgang, when I run texexec prova.tex I obtain prova.pdf and
prova-mpgraph.1 Both files have background white and not transparent
background. I don't know how explain it.
Perhaps this
Am 14.03.2009 um 17:15 schrieb Xan:
Eh? Green? I think in transparent.
I tried to show you the included pdf had a transparent background, the
color is unimportant.
I transform your logo.pdf with GIMP and applying transparency in
green color. The result I save as png file (gimp says me
, see the png file and see that background is transparent.
If you're interested I can send you a better version with bold letters.
Yes, I want to have exactly the same logo of the wiki.
Wolfgang
Thanks Wolfgang for your hacking. ;-)
Regards,
Xan
logo of the wiki.
Which size do you need?
Wolfgang
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
not
support transparency? Strange. Really strange.
If you're interested I can send you a better version with bold letters.
Yes, I want to have exactly the same logo of the wiki.
Which size do you need?
Size? The size of the font: the same. But more bold.If you see wiki logo
have letters more
On Sat, 14 Mar 2009, Xan wrote:
Yes, Wolfgang. Now I understand it.
The actually process is:
texexec prova.tex -- prova.pdf and prova-mpgraph.1 (eps file) generated.
and I see what you said.
So it has transparent background, but why gimp says that eps does not support
transparency? Strange.
: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You are free to use this code any way you can
\setupcolors[state=start,textcolor=white]
\startMPenvironment[global]
\usetypescript[postscript][ec]
\setupbodyfont[postscript,ss,144pt]
\stopMPenvironment
\starttext
really CC Atribution 3.0 unported
[http://creativecommons.org/licenses/by/3.0]
What this copyright means?
Sorry for the nuissance ;-)
we're talking about the cowfonts?
In this message we are talking about the license of the code of Taco for
doing in Metafun the wiki logo
we've put them
En/na Taco Hoekwater ha escrit:
Hi Xan,
Most of these questions should be answered by Mojca, I guess, but:
Xan wrote:
2) Another related question is what is the license of the ConTeXt
official logo and what is it. Is it the logo that appears in the wiki
[http://wiki.contextgarden.net/skins
with the minimals, I moved the code
now in a ConTeXt file and this works for me:
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You are free to use this code any way you can
\setupcolors[state=start,textcolor=white]
\usetypescript[helvetica]
\setupbodyfont
:
I have the same problem with the minimals, I moved the code
now in a ConTeXt file and this works for me:
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You are free to use this code any way you can
\setupcolors[state=start,textcolor=white
Am 12.03.2009 um 18:01 schrieb Xan:
Thanks, Wolfgang. Now it works, but whith tiny letters (see
attachments)
New version (the old worked only under MkIV).
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You are free to use this code any way you
En/na Wolfgang Schuster ha escrit:
Am 12.03.2009 um 18:01 schrieb Xan:
Thanks, Wolfgang. Now it works, but whith tiny letters (see attachments)
New version (the old worked only under MkIV).
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You
En/na Wolfgang Schuster ha escrit:
Am 12.03.2009 um 18:01 schrieb Xan:
Thanks, Wolfgang. Now it works, but whith tiny letters (see attachments)
New version (the old worked only under MkIV).
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco Hoekwater
% You
On Thu, 12 Mar 2009, Wolfgang Schuster wrote:
Am 12.03.2009 um 18:01 schrieb Xan:
Thanks, Wolfgang. Now it works, but whith tiny letters (see attachments)
New version (the old worked only under MkIV).
% logo.mp: creates a blue traffic sign-style context logo
% Copyright 2008 Taco
://www.ntg.nl/pipermail/ntg-context/2008/035005.html].
2) Another related question is what is the license of the ConTeXt
official logo and what is it. Is it the logo that appears in the wiki
[http://wiki.contextgarden.net/skins/common/images/logo-alt4.png] or is
it simply the graphics of typing
Hi,
I need the LaTeX logo in a document set with 8.5pt but with the last beta
the following message.
! LuaTeX error (arithmetic): divided by zero.
\actualshipout ... \box \postponedcontent \box 0}}
\else \message {[\ifarrang...
\myshipout ... \fi
=Logotipos]
\setupheadtext [\s!ro] [\v!logos=Logo-uri]
\setupheadtext [\s!fr] [\v!units=Unit\'es]
\setupheadtext [\s!es] [\v!units=Unidades]
\setupheadtext [\s!ca] [\v!units=Unitats]
\setupheadtext [\s!it] [\v!units=Unit\`a]
\setupheadtext [\s!la] [\v!units=Modi]
\setupheadtext [\s!pt] [\v!units
Wolfgang Schuster wrote:
Hi,
I need the LaTeX logo in a document set with 8.5pt but with the last beta
the following message.
! LuaTeX error (arithmetic): divided by zero.
\actualshipout ... \box \postponedcontent \box 0}}
\else \message
[\s!es] [\v!logos=Logotipos]
\setupheadtext [\s!ca] [\v!logos=Logotips]
\setupheadtext [\s!it] [\v!logos=Logotipi]
\setupheadtext [\s!la] [\v!logos=Typi negotiales]
\setupheadtext [\s!pt] [\v!logos=Logotipos]
\setupheadtext [\s!ro] [\v!logos=Logo-uri]
\setupheadtext [\s!fr] [\v!units=Unit\'es
]
\setupheadtext [\s!ca] [\v!logos=Logotips]
\setupheadtext [\s!it] [\v!logos=Logotipi]
\setupheadtext [\s!la] [\v!logos=Typi negotiales]
\setupheadtext [\s!pt] [\v!logos=Logotipos]
\setupheadtext [\s!ro] [\v!logos=Logo-uri]
\setupheadtext [\s!fr] [\v!units=Unit\'es]
\setupheadtext [\s!es] [\v!units
Hi,
Have we a mascot ?
http://chl.be/mascots/
Yes we do. Its the dutch cow :-)
I thought that people in Bohinj more ore less agreed(*) that we don't want
any animals as a logo (except for your elephant, of course ;-)). Wasn't
this the reason, we tried hard to come up with a geometrically
On Mon, Dec 15, 2008 at 9:25 PM, Patrick Gundlach patr...@gundla.ch wrote:
Hi,
Have we a mascot ?
http://chl.be/mascots/
Yes we do. Its the dutch cow :-)
I thought that people in Bohinj more ore less agreed(*) that we don't want
any animals as a logo (except for your elephant
Patrick Gundlach wrote:
Hi,
Have we a mascot ?
http://chl.be/mascots/
Yes we do. Its the dutch cow :-)
I thought that people in Bohinj more ore less agreed(*) that we don't want
any animals as a logo (except for your elephant, of course ;-)). Wasn't
this the reason, we tried hard to come
any animals as a logo (except for your elephant, of course ;-)). Wasn't
this the reason, we tried hard to come up with a geometrically formed
context logo?
It's not a logo.
It's a mascot, like TeX lion, linux penguin, GNU gnu and so on .
Cow fonts was made from Duane Bibby's
On Mon, Dec 15, 2008 at 11:23 PM, Hans Hagen pra...@wxs.nl wrote:
Patrick Gundlach wrote:
I thought that people in Bohinj more ore less agreed(*) that we don't want
any animals as a logo (except for your elephant, of course ;-)). Wasn't
this the reason, we tried hard to come up
that people in Bohinj more ore less agreed(*) that we
don't want
any animals as a logo (except for your elephant, of course ;-)). Wasn't
this the reason, we tried hard to come up with a geometrically formed
context logo?
It's not a logo.
It's a mascot, like TeX lion, linux
this
http://melusine.eu.org/syracuse/metapost/animations/poulain/?swf=2
under the logo
--
luigi
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http
Am 23.11.2008 um 19:20 schrieb Zoho Vignochi:
Hello:
I am a recent convert from LaTeX to conTeXt. kudos to all the
developers!
I have read through the wiki and as many tutorials/manuals as I can
find.
My problem is that I have a footer which includes a logo. I would like
all
Hello:
I am a recent convert from LaTeX to conTeXt. kudos to all the developers!
I have read through the wiki and as many tutorials/manuals as I can find.
My problem is that I have a footer which includes a logo. I would like
all the elements in the footer to be vertically centred, where
\PS is undefined)? This occurs quite
commonly, particularly with numbers. I can define the abbreviation fine, and I
can use the \infull version of it fine, but I can't use the command version at
all. Another example: \ATX12V. I've been working around it by defining both
synonyms and a logo like
Bob Reynolds wrote:
I can define the abbreviation fine, and I can use the \infull version
of it fine, but I can't use the command version at all. Another
example: \ATX12V. I've been working around it by defining both
synonyms and a logo like \PSTwo which typesets like I want \PS/2
Bob Reynolds wrote:
\define [1] \StretchedSmallCaps {\smallcaps {\stretchedlowercase {#1}}}
You need a more low-level definition of this command because
of macro expansion issues inside the logo processing.
It works fine with this:
\unexpanded\def\StretchedSmallCaps#1
\blank[line]
\vfill
%\useexternalfigure[some logo][logopolito][width=5cm]
%\placeexternalfigure{'}{\externalfigure[some logo]}
% whit this i can put the figure in the middle, but i don't want text
{\externalfigure[D:/Documenti/ProgettoTesi/MaterialeTeorico
\vfill
\setupheads[alternative=middle]
\title{Un modello per la generazione dinamica \crlf di paesaggi sonori}
\blank[line]
Ingegneria del cinema e dei mezzi di comunicazione
\blank[line]
\vfill
% \useexternalfigure[some logo][logopolito][width=5cm
]
\vfill
%\useexternalfigure[some logo][logopolito][width=5cm]
%\placeexternalfigure{'}{\externalfigure[some logo]}
% whit this i can put the figure in the middle, but i don't want
text
{\externalfigure[D:/Documenti/ProgettoTesi/MaterialeTeorico/
Immagini/logopolito][width=5cm
Hello,
I tried to put logo on my pages.
I got an undefine control sequence with luatex.
This small exemple look to run fine with pdftex but not luatex in context live.
\definelogo[mypic][bottom][left]
[state=start,command={\externalfigure[pic]}]
\placelogos[mypic]
\starttext
Hello world
Olivier Guéry wrote:
Hello,
I tried to put logo on my pages.
I got an undefine control sequence with luatex.
This small exemple look to run fine with pdftex but not luatex in context
live.
\definelogo[mypic][bottom][left]
[state=start,command={\externalfigure[pic]}]
\placelogos
in fact i like the logo on the photo.
It's cool
On Wed, Aug 27, 2008 at 7:30 PM, Mojca Miklavec
[EMAIL PROTECTED] wrote:
Another request: can the photo please go to blog rather than being on
the first page of the wiki? (It's been fun, but I feel that promoting
Union on the first page
it so I can find what I'm looking for and get up to speed asap.
As for the logo...
Who cares ?
Logo's don't enable people to figure out how to use software and be
productive with it.
The proof is in the pudding, not in the logo.
Hope that helps.
Best,
Alan
Hi,
but where is the original search buttom? I don't like the google
special search here:(
I've removed it in favour of the google one. I thought two search
areas could be confusing.
What do the others think?
@Mojca: could you update the custom google search to the new logo?
Patrick
area
Could you suggest some other names? I always have a hard time thinking
of some.
All these don't mean a thing to somebody who sees this page for the
first time.
You're right.
As for the logo...
Who cares ?
Logo's don't enable people to figure out how to use software
Le 27 août 08 à 11:20, Marcin Borkowski a écrit :
As you said: a professional-looking logo is a good thing.
BTW: the current logo looks like this:
O
C N
E
T X
T
I don't like the order;
I didn't like it neither
what about
O
C N
T
T X
E
?
I
Dnia Wed, Aug 27, 2008 at 11:14:10AM +0200, Patrick Gundlach napisa#322;(a):
As for the logo...
Who cares ?
Logo's don't enable people to figure out how to use software and be
productive with it.
The proof is in the pudding, not in the logo.
Right, but presenting ConTeXt
thought two search
areas could be confusing.
What do the others think?
@Mojca: could you update the custom google search to the new logo?
Done, but please delete the gray line below the logo.
(slightly more than 12 hours since I finally came home, still didn't
catch for the lack of sleep
I like it a lot
So, new logo from Bohinj?
-a-
On 26 Aug 2008, at 12:19, Aditya Mahajan wrote:
Hi,
After the discussions at Bohinj, I have created a new first page of
the
wiki. I am tried to keep things short and to the point, rather than
complete. As a result a lot of links that were
:
+--+ Company Name
| |
| Logo |
| |
+--+
+
Type of document| Page
Report of something | 2 (10)
---++
Name
Hi Stefan,
I'll try to illustrate using a monospaced font:
+--+ Company Name
| |
| Logo |
| |
+--+
+
Type of document| Page
Report
On Thu, Apr 17, 2008 at 5:34 PM, Henning Hraban Ramm [EMAIL PROTECTED] wrote:
Am 2008-04-17 um 17:08 schrieb Wolfgang Schuster:
You need a closing (Sincerely,) and signature, and don't forget
enough
topspace to accommodate a company logo/letterhead :-)
You set closing and signature also
that to ConTeXt, PDF
with one page per person gets imposed and printed on cardboard with
pre-printed logo)
Another problem were different letter heads for first, odd and even
pages.
Different header for the first and another one for the following
headers
is simple and possible with my
Hansen},
address={Zielweg 34\\78561 Tiny Town}]
\starttext
\startletter
[opening={Dear Hans,}]
letter text
\stopletter
\stoptext
You need a closing (Sincerely,) and signature, and don't forget enough
topspace to accommodate a company logo/letterhead :-)
FWIW: Here is the basic
normally use InDesign for my business letters and invoices.
But I coded my last job applications completely in ConTeXt and
adapted Holger Schöner's environment for my needs.
I remember it was not that easy to get my address and logo exactly in
the same places as in my InDesign template - I use
it with LuaTeX,
TeX's arithmetic to limited for longer calculations.
But I coded my last job applications completely in ConTeXt and
adapted Holger Schöner's environment for my needs.
I remember it was not that easy to get my address and logo exactly in
the same places as in my InDesign template - I
, and don't forget enough
topspace to accommodate a company logo/letterhead :-)
You set closing and signature also with the optional argument for \startletter
\startletter
[opening=Dear Idris\textcomma,
closing=Sincerely\textcomma,
signature=Wolfgang Schuster]
You could define your own
with
pre-printed logo)
Another problem were different letter heads for first, odd and even
pages.
Different header for the first and another one for the following
headers
is simple and possible with my module. The option to change the layout
for odd and even pages is currently not supported
on Google searches. I've worked my way up to making
a letter head with my address, a graphic logo, and couple of font
switches, and some hanging punctuation. I made another version for my
journal with two columns under each section heading. I'm using Scite as
my editor, but I haven't set
been working my way through the documentation, ConTeXt Garden, and
whatever I can find on Google searches. I've worked my way up to making
a letter head with my address, a graphic logo, and couple of font
switches, and some hanging punctuation. I made another version for my
journal with two
nailed it down: if I
try to include a pdf image into a ConTeXt document
\starttext
\externalfigure[Logo][width=56mm,height=20mm]
\stoptext
(with any pdf file) I get this error:
./Logo.pdf
! TeX capacity exceeded, sorry [PDF object stream buffer=5].
\dogetTPDfiguresize ...geBox
Dne torek 5. februarja 2008 je Matija Šuklje napisal(a):
No, it was a presentation in Cyberpipe (video will be available on
http://video.kiberpipa.org in a few days/weeks) ;)
Actually, here it is already:
http://video.kiberpipa.org/media/POT_Mojca_Miklavec-ConTeXt-Latex_v_novi_preobleki/raw.html
The Content-Type is wrong :-D (Actually, missing altogether ...)
p.s. the presentation is in Slovene, but you can still admire the costume and
the cowfont ;)
Grml, missing Theora codecs somehow
Arthur Reutenauer wrote:
http://video.kiberpipa.org/media/POT_Mojca_Miklavec-ConTeXt-Latex_v_novi_preobleki/raw.html
The Content-Type is wrong :-D (Actually, missing altogether ...)
p.s. the presentation is in Slovene, but you can still admire the costume
and
the cowfont ;)
Le 06 février à 18:12:30 Hans Hagen [EMAIL PROTECTED] écrit notamment:
| Arthur Reutenauer wrote:
|
http://video.kiberpipa.org/media/POT_Mojca_Miklavec-ConTeXt-Latex_v_novi_preobleki/raw.html
|
|The Content-Type is wrong :-D (Actually, missing altogether ...)
|
| p.s. the presentation
Am 06.02.2008 um 19:00 schrieb Jean Magnan de Bornier:
Le 06 février à 18:12:30 Hans Hagen [EMAIL PROTECTED] écrit notamment:
| Arthur Reutenauer wrote:
| http://video.kiberpipa.org/media/POT_Mojca_Miklavec-ConTeXt-
Latex_v_novi_preobleki/raw.html
|
|The Content-Type is wrong :-D
Dne sreda 6. februarja 2008 je Steffen Wolfrum napisal(a):
Where is the cowfont actually ?
In the titles/sections of the slides ;)
Cheers,
Matija
--
gsm: +386 41 849 552
e-mail: [EMAIL PROTECTED]
www: http://matija.suklje.name
aim: hookofsilver
icq: 110183360
jabber/g-talk: [EMAIL
Hello Taco (or other cow fans),
What's the easiest way to get the ConTeXt logo with the cow font
(possibly in mkiv, but not neccessary)? Do I need to use low-level
(Lua) or is there already some kind of \getglyph{C_o_n_T_e_X_t}
already available?
Thanks a lot,
Mojca
Are you preparing the new T-shirts? ;o)
Steffen
Am 05.02.2008 um 16:18 schrieb Mojca Miklavec:
Hello Taco (or other cow fans),
What's the easiest way to get the ConTeXt logo with the cow font
(possibly in mkiv, but not neccessary)? Do I need to use low-level
(Lua) or is there already some
Steffen == Steffen Wolfrum [EMAIL PROTECTED] writes:
Steffen Are you preparing the new T-shirts? ;o) Steffen
I want one :-D
Sincerely,
Gour
--
Gour | Zagreb, Croatia | GPG key: C6E7162D
pgpvUS0XtNgNC.pgp
Description: PGP
Hi Mojca,
Mojca Miklavec schrieb:
Hello Taco (or other cow fans),
What's the easiest way to get the ConTeXt logo with the cow font
(possibly in mkiv, but not neccessary)? Do I need to use low-level
(Lua) or is there already some kind of \getglyph{C_o_n_T_e_X_t}
already available?
I
Dne torek 5. februarja 2008 je Steffen Wolfrum napisal(a):
Are you preparing the new T-shirts? ;o)
No, it was a presentation in Cyberpipe (video will be available on
http://video.kiberpipa.org in a few days/weeks) ;)
Cheers,
Matija
--
gsm: +386 41 849 552
e-mail: [EMAIL PROTECTED]
www:
Mojca Miklavec wrote:
Hello Taco (or other cow fans),
What's the easiest way to get the ConTeXt logo with the cow font
(possibly in mkiv, but not neccessary)? Do I need to use low-level
(Lua) or is there already some kind of \getglyph{C_o_n_T_e_X_t}
already available?
\usesymbols[cow
\startcombination[3]
{\framed[align={right,lohi},height=27mm,width=35mm\relax]
{ LOGO } }
{\framed[align={right,lohi},width=35mm\relax]
{left} }
{\framed[align={middle,lohi},height=27mm,width=80mm\relax]
{titel } }
{\framed[align={middle,lohi},width=80mm\relax
]
{ LOGO } }
{\framed[align={right,lohi},width=35mm\relax]
{left} }
{\framed[align={middle,lohi},height=27mm,width=80mm\relax]
{titel } }
{\framed[align={middle,lohi},width=80mm\relax]
{middle} }
{\framed[align={right,lohi},height=27mm,width=45mm\relax]
{other stuff
in a company which works with ConTeXt, and you would
be ready to help sponsoring that competition by providing prizes for
best contributors/designers or for Patrick's work on the garden,
please let me know.
We could put logo of your company on the garden page(s) and announce
that you have helped us
.
---
A) I am trying to get a logo to appear in the top left of every page.
I have already discovered that I can include a graphic like so:
\externalfigure[shift]
This works just fine
However if I try to define a logo like so:
\definelogo[logo][top][left]
[command
401 - 500 of 569 matches
Mail list logo