0pt]
\usesymbols[mvs]
\setupsymbolset [martinvogel 2]
\def\ornament{\darkred\symbol[Radioactivity]}
\starttexdefinition Ornamentation #1
\framed[frame=on] {\ornament\ {#1}\ \ornament}
\stoptexdefinition
\starttexdefinition OrdinalDate #1
\Ornamentation{\tfb\getmarking[chapter]\space\ordinalnumber{#1}
ument" },
documentpart = { pua = "ua1", pdf = "NonStruct" },
division = { pua = "ua1", pdf = "Part" },
paragraph = { pua = "ua1", pdf = "P" },
subparagraph = { pua = "ua1
P" },
subparagraph = { pua = "ua1", pdf = "P" },
p = { pua = "ua1", pdf = "P" },
highlight = { pua = "ua1", pdf = "Span" },
ornament
phs
Command/ note
Command/ ornament
Command/ paragraphs
Command/ placecombinedlist
Command/ placefloat
Command/ placelistoffloats
Command/ placelistofsorts
Command/ placelistofsynonyms
Command/ placement
Command/ placepairedbox
Command/ placeregister
Command/ presetlabeltext
Command/ referenceformat
Here comes another one that works with the switch --luatex but not in lmtx:
\setuppapersize[A6,landscape][A6,landscape]
\startuseMPgraphic{ornament}
StartPage ;
save diff ;numeric diff;
diff = .3cm ;
save w; numeric w;
w = xpart (lrcorner Field[Text][Text] - llcorner Field[Text][Text]) - diff
3B7 η GREEK SMALL LETTER ETA
> 7 U+021A9 ↩ LEFTWARDS ARROW WITH HOOK
> 350 U+02500 ─ BOX DRAWINGS LIGHT HORIZONTAL
>98 U+02502 │ BOX DRAWINGS LIGHT VERTICAL
>42 U+02514 └ BOX DRAWINGS LIGHT UP AND RIGHT
> 133 U+0251C ├ BOX DRAWINGS LIGHT VERTICAL AND RI
02772 ❲ LIGHT LEFT TORTOISE SHELL BRACKET ORNAMENT
154 U+02773 ❳ LIGHT RIGHT TORTOISE SHELL BRACKET ORNAMENT
14 U+0278A ➊ DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT ONE
stop missing characters
start missing characters: cambria.ttc
9 U+0278A ➊ DINGBAT NEGATIVE CIRCLED SANS-SERIF DIG
U+02514 └ BOX DRAWINGS LIGHT UP AND RIGHT
133 U+0251C ├ BOX DRAWINGS LIGHT VERTICAL AND RIGHT
154 U+02772 ❲ LIGHT LEFT TORTOISE SHELL BRACKET ORNAMENT
154 U+02773 ❳ LIGHT RIGHT TORTOISE SHELL BRACKET ORNAMENT
14 U+0278A ➊ DINGBAT NEGATIVE CIRCLED SANS-SERIF DIGIT ONE
stop missing c
On Fri, Dec 17, 2021 at 10:05 AM Hans Hagen wrote:
>
> On 12/17/2021 6:40 AM, Mikael Sundqvist via ntg-context wrote:
> > Hi,
> >
> > When using an ornament on a \startframedtext \stoptextframed the frame
> > is shifted just a little bit. Can one get ri
On 12/17/2021 6:40 AM, Mikael Sundqvist via ntg-context wrote:
Hi,
When using an ornament on a \startframedtext \stoptextframed the frame
is shifted just a little bit. Can one get rid of that shift? MWE
below.
/Mikael
\defineornament[MyOrn][
corner={right,bottom},
location={right,top
Hi,
When using an ornament on a \startframedtext \stoptextframed the frame
is shifted just a little bit. Can one get rid of that shift? MWE
below.
/Mikael
\defineornament[MyOrn][
corner={right,bottom},
location={right,top},
alternative=b,
][
frame=off,
]
\showframe
\starttext
Willi Egger schrieb am 04.08.2020 um 18:56:
>> Hi,
>> now I have another hurdle to be taken :-) — Depending on the odd or even
>> number of the section I have to place an ornament at the end of the section.
>> I have sofar the following setup:
>> [...]
>> However
Willi Egger schrieb am 04.08.2020 um 18:56:
Hi,
now I have another hurdle to be taken :-) — Depending on the odd or even number
of the section I have to place an ornament at the end of the section.
I have sofar the following setup:
[...]
However the the evaluation of the sectionnumber
Hi,
now I have another hurdle to be taken :-) — Depending on the odd or even number
of the section I have to place an ornament at the end of the section.
I have sofar the following setup:
\define\stopmysection
{\setups{endsection}}
\startsetups endsection
\doifelse
t this moment I have:
>>>
>>> \startsetups endsection
>>> \vfil
>>> \placefigure[middle,none][]{}{\externalfigure[ornament2][height=2\lineheight]}
>>> \stopsection
>>> \stopsetups
>>>
>>> \def\stopmysection{\setups{endsection}}
>>>
I'm on a linux64 machine, and there is indeed a mtx-fonts.lua file:
>>
>> ~/context/tex/texmf-context/scripts/context/lua/mtx-fonts.lua
>>
>> Am I missing something?
>
> Refresh the database:
>
> luatools --generate
>
> Aditya
>
>
>
have:
\startsetups endsection
\vfil
\placefigure[middle,none][]{}{\externalfigure[ornament2][height=2\lineheight]}
\stopsection
\stopsetups
\def\stopmysection{\setups{endsection}}
I use then instead of \stopsection the \stopmysection. This works except that
the ornament is in some cases
t I have:
>
> \startsetups endsection
> \vfil
>
> \placefigure[middle,none][]{}{\externalfigure[ornament2][height=2\lineheight]}
> \stopsection
> \stopsetups
>
> \def\stopmysection{\setups{endsection}}
>
> I use then instead of \stopsection the \stopmysection. This
][height=2\lineheight]}
\stopsection
\stopsetups
\def\stopmysection{\setups{endsection}}
I use then instead of \stopsection the \stopmysection. This works except that
the ornament is in some cases placed on the next page. — My question is whether
it is possible to do a \testpage and evaluate the
, Fabrice Couvreur wrote:
> >> Hi Palbo,
> >> In fact I want the text '' Coming back ... '' to start on the same
> >> baseline as the title of the ornament as in the photo.
> >
> > Hi Fabrice,
> >
> > I’m afraid I don’t know how
On 8/19/2018 11:47 AM, Pablo Rodriguez wrote:
On 08/18/2018 11:51 PM, Fabrice Couvreur wrote:
Hi Palbo,
In fact I want the text '' Coming back ... '' to start on the same
baseline as the title of the ornament as in the photo.
Hi Fabrice,
I’m afraid I don’t know how to
On 08/18/2018 11:51 PM, Fabrice Couvreur wrote:
> Hi Palbo,
> In fact I want the text '' Coming back ... '' to start on the same
> baseline as the title of the ornament as in the photo.
Hi Fabrice,
I’m afraid I don’t know how to do that (if that is possible
Hi Palbo,
In fact I want the text '' Coming back ... '' to start on the same baseline
as the title of the ornament as in the photo.
Thanks.
Fabrice
Info Coming back ...
blablablablabla
Le sam. 18 août 2018 à 13:26, Pablo Rodriguez a écrit :
> On 08/18/2018 11:11 AM,
red me the following code to insert comments with an
> > ornament. I notice that the option alternative= serried does not seem to
> > work.
>
> Hi Fabrice,
>
> I think it is not clear what do you intend to do with the frame.
>
> If text inside isn’t broken in lines is be
On 08/17/2018 11:24 AM, Fabrice Couvreur wrote:
> Hello,
> Aditya offered me the following code to insert comments with an
> ornament. I notice that the option alternative= serried does not seem to
> work.
Hi Fabrice,
I think it is not clear what do you intend to do with the fra
Neither framedtext nor framed have a alternative key. You can check this
very easy by looking into setup-en.pdf.
Wolfgang
Fabrice Couvreur schrieb am 17.08.18 um 11:24:
Hello,
Aditya offered me the following code to insert comments with an
ornament. I notice that the option alternative
Hello,
Aditya offered me the following code to insert comments with an ornament. I
notice that the option alternative= serried does not seem to work.
Thank you.
Fabrice
\definecolor[MyColorA][r=0.8784, g=0.8784, b=0.8784]
\definecolor[MyColorB][c=0.00,m=0.27,y=1.00,k=0.00
> \defineornament
>[FrameTitle]
>[preset=lefttop]
I tried this example and I wonder what the [preset=lefttop] does. Because
whatever I fill in for lefttop, the ornament appears always in the topleft
corner and nowhere else.
Hans van der Meer
> On 23 Aug 2017, at 0
Fabrice Couvreur wrote:
> > Hi Aditya,
> > I tried :
> > [...]
> > to have my text wrapped around the ornament as in the figure but it
> > does not work.
>
> Hi Fabrice,
>
> sorry if I’m missing something, but I wonder whether the next sample is
>
On 08/30/2017 06:07 PM, Fabrice Couvreur wrote:
> Hi Aditya,
> I tried :
> [...]
> to have my text wrapped around the ornament as in the figure but it
> does not work.
Hi Fabrice,
sorry if I’m missing something, but I wonder whether the next sample is
what you intend.
,
]
to have my text wrapped around the ornament as in the figure but it does
not work.
Thanks
Fabrice
2017-08-23 1:20 GMT+02:00 Fabrice Couvreur :
> Sorry 'corner=00' !
>
> 2017-08-23 1:01 GMT+02:00 Fabrice Couvreur :
>
>> Hi Aditya,
>> Sorry I forgot to attach
= "klaus:97a",
pages ="397--406",
publisher ="Indica et Tibetica",
year = 1997,
editor = "P. Kieffer-Pülz and Jens-Uwe Hartmann",
volume = 30,
address = "Swisttal-Odendorf",
}
2.) And
; title ="{s}{G}am.{p}o.{p}a, The Jewel Ornament of
> > Liberation\,: {D}am.\-{c}hos {y}id.{b}žin.{g}yi
> > {n}or.{b}u {t}har.{p}a {r}in.{p}o {c}he'i {r}gyan
> > {ž}es.{b}ya.{b}a {t}heg.{p}a {c}hen.\-{p}o'{
On Mon, 22 May 2017 11:41:57 +1200
Richard Mahoney | Indica et Buddhica wrote:
> 2.) And for the initial letter of the title, SGam.po.pa not
> sGgam.po.pa:
>
> @Book{guenther:sgam,
> title = "{s}{G}am.{p}o.{p}a, The Jewel Ornament of
> Liberation\
P. Kieffer-Pülz and Jens-Uwe Hartmann",
volume = 30,
address = "Swisttal-Odendorf",
}
2.) And for the initial letter of the title, SGam.po.pa not sGgam.po.pa:
@Book{guenther:sgam,
title ="{s}{G}am.{p}o.{p}a, The Jewel Ornament of
On 11/24/2013 11:33 PM, "H. Özoguz" wrote:
Hi Ondra,
thanks for your help.
Apparently, replacing a number enclosed in ornate parentheses (U+FD3E
and U+FD3F) with a number in the "end of ayah" ornament is a specialty
of the UthmanicHafs font. If I input the digit (e.g.
Hi Ondra,
thanks for your help.
Apparently, replacing a number enclosed in ornate parentheses (U+FD3E
and U+FD3F) with a number in the "end of ayah" ornament is a specialty
of the UthmanicHafs font. If I input the digit (e.g. U+0662) and then
the special non-printable "end of
verys small number. There
> are some problems like this. Are they easy to fix, or is this problem deeply
> involved?
Apparently, replacing a number enclosed in ornate parentheses (U+FD3E
and U+FD3F) with a number in the "end of ayah" ornament is a specialty
of the UthmanicHafs font. If
) Élément décoratif de fantaisie ornant
le titre ou les blancs des principales divisions d'un ouvrage [livre]
(Trésor de la langue française informatisé).
% Creation of the ornament as an entity (in the form of a box)%
Typesetting true *fleurons* requires the use of
divisions d'un ouvrage [livre] (Trésor de la
langue française informatisé).
%
%%%
% Creation of the ornament as an entity (in the form of a box)
% Typesetting true *fleurons* requires the use of *TeX*'s special *box
registers* as arguments;
% here box register number *0
thanks again and good luck!
Francisco
% Fleuron.tex
% Example script of the creation and use of a documental ornament
% We first define the documental ornament
% under the traditional name of *Fleuron*
% in the way brilliantly formulated by Herr Schuster
\def\Fleuron
{\par
\leaders\vbox
what is the
amount of space remaining in the page?
One can imagine that this method could even be helpful in other situations of
the typesetting operation not related to the last page.
Does someone know how to handle it?
You can use leaders to place a box with the symbols/ornament because
s the size that *Context* has calculated for *Fleuron* and what
> is the amount of space remaining in the page?
>
> One can imagine that this method could even be helpful in other situations of
> the typesetting operation not related to the last page.
>
> Does someone know how to
Am 26.05.10 17:55, schrieb Bernhard Rosensteiner:
ah, i see. found already solution:
another way is to force helvetica/heros in the ornament with
'style={\switchtobodyfont[heros]}', it's slower but doesn't depend on
the
5D HEAVY DOUBLE TURNED COMMA QUOTATION MARK ORNAMENT
〝 U+301D REVERSED DOUBLE PRIME QUOTATION MARK
General Character Properties
Block: General Punctuation
Unicode category: Punctuation, Initial Quote
Various Useful Representations
UTF-8: 0xE2 0x80 0x9C
UTF-16: 0x201C
C octal escaped UTF-8: \342\200\
}\ifx \!!stringa
>>>>> \empty \e...
>>>>>
>>>>> \stoplocalframed ...ing {\@@framed \c!background }
>>>>>\dobackedbox
>>>>> \handleframed...
>>>>>
>&g
}\ifx \!!stringa
>>>> \empty \e...
>>>>
>>>> \stoplocalframed ...ing {\@@framed \c!background }
>>>>\dobackedbox
>>>> \handleframed...
>>>>
>>>> \PlaatschapterStatus ... [\v
47 matches
Mail list logo
