Hello list,
I have a PHP application which generates documentation on the fly with
context. This has been working really well, but I am now testing
deployment on a new server with a more recent version of context, and it
seems to be somehow getting itself into a tight loop.
When I run
On 25-11-2011 06:12, Brendan Jurd wrote:
Hello list,
I have a PHP application which generates documentation on the fly with
context. This has been working really well, but I am now testing
deployment on a new server with a more recent version of context, and it
seems to be somehow getting
On 24-11-2011 21:18, Pontus Lurcock wrote:
On Thu 24 Nov 2011, Romain Diss wrote:
- again in french, the liter symbol is lowercase l (althought the
uppercase L is also temporarly accepted).
Not only in French, but in most of Europe, I think:
http://en.wikipedia.org/wiki/Litre#Symbol . Should
On 24-11-2011 13:36, robin.kirk...@csiro.au wrote:
On Monday, 21 November 2011 20:52, Hans Hagen wrote:
Over the weekend I've discovered a couple more problems with \unit so I'll
make up some test cases and desired output and post it in a few days.
ok, I'll wait for that then
Hans, all,
I
Maybe it’s possible with MkIV to check if the text before the \unit command
was
a number but of the number is part of the unit them put in the command, such
things are always tricky with TeX and it’s better to force users to use
proper input.
Within \type{phys-dim.lua} all the
On 25-11-2011 10:29, Ian Lawrence wrote:
Maybe it’s possible with MkIV to check if the text before the \unit command was
a number but of the number is part of the unit them put in the command, such
things are always tricky with TeX and it’s better to force users to use proper
input.
On 25-11-2011 01:44, Aditya Mahajan wrote:
On Fri, 25 Nov 2011, Paul Menzel wrote:
Dear ConTeXt folks,
Am Sonntag, den 20.11.2011, 20:09 +0100 schrieb Paul Menzel:
there must be a regression between
ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2011.7.24 int: english/english
and
ConTeXt ver:
On 17-11-2011 14:05, Andreas Harder wrote:
On 16.11.2011, at 15:21, Pavneet Arora wrote:
Hello,
I am trying to do a simple cell background shading in a table using the example
at the wiki:
http://wiki.contextgarden.net/Table
Unfortunately, I get an Undefined control sequence ... error:
!
On 17-11-2011 15:32, Troy Henderson wrote:
Occasionally when I use a two column itemize like
\startitemize[n,a,columns,two]
\item some text\column
\item some more text
\stopitemize
near the bottom of a page, the second column item gets sent to the next
page but the first column
Am 25.11.2011 um 09:18 schrieb Hans Hagen:
On 24-11-2011 21:18, Pontus Lurcock wrote:
On Thu 24 Nov 2011, Romain Diss wrote:
- again in french, the liter symbol is lowercase l (althought the
uppercase L is also temporarly accepted).
Not only in French, but in most of Europe, I think:
On Thu, 24 Nov 2011 22:17:43 -0700, Wolfgang Schuster
schuster.wolfg...@googlemail.com wrote:
It works when you give \definefloat a second argument with the plural
name of your float.
Ah! Thank you, Wolfgang, for pointing that out! Missed it completely ...
Best wishes
Idris
--
Professor
On 25 nov. 2011, at 15:09, Idris Samawi Hamid ادريس سماوي حامد wrote:
On Thu, 24 Nov 2011 22:17:43 -0700, Wolfgang Schuster
schuster.wolfg...@googlemail.com wrote:
It works when you give \definefloat a second argument with the plural name
of your float.
Ah! Thank you, Wolfgang, for
I have troubles with interaction in a screen document.
(1) I took the example from the wiki:
\setuppapersize[A6][A6]
\setupinteraction[state=start]
\setupreferencing[interaction=all]
\starttext
Reference is here \reference[label:1]{Some text}
\page[yes] % Insert page break
Link to \goto{some text
Am 25.11.2011 um 17:26 schrieb Hans van der Meer:
I have troubles with interaction in a screen document.
(1) I took the example from the wiki:
\setuppapersize[A6][A6]
\setupinteraction[state=start]
\setupreferencing[interaction=all]
\starttext
Reference is here \reference[label:1]{Some
On 25 nov. 2011, at 17:33, Wolfgang Schuster wrote:
Am 25.11.2011 um 17:26 schrieb Hans van der Meer:
I have troubles with interaction in a screen document.
(1) I took the example from the wiki:
\setuppapersize[A6][A6]
\setupinteraction[state=start]
\setupreferencing[interaction=all]
Am 25.11.2011 um 18:08 schrieb Meer, H. van der:
On 25 nov. 2011, at 17:33, Wolfgang Schuster wrote:
Am 25.11.2011 um 17:26 schrieb Hans van der Meer:
I have troubles with interaction in a screen document.
(1) I took the example from the wiki:
\setuppapersize[A6][A6]
Hi,
with the latest beta the following do not work anymore (example from
math-ali.mkiv).
\starttext
\placeformula \startformula \startalign
\NC a \EQ b \NR[+]
\NC c \EQ d \NR
\NC\EQ f \NR[for:demo-a-1]
\NC\EQ g \NR[for:demo-a-2][a]
\NC\EQ h \NR[for:demo-a-3][b]
\NC
Hello ConTeXt folks.
Is it possible to adjust the size of the gap between the lower edge of
the picture and its caption in simple externalfigure command?
By experimenting I found that this gap can be set in a floating
environment (placefigure) using inbetween parameter.
Is there possibilities
Well, since you are in a startcombinations block and not a figure
environement, try this:
\setupcombinations[inbetween={\blank[1cm]}]
-Ursprüngliche Nachricht-
Von: ntg-context-boun...@ntg.nl [mailto:ntg-context-boun...@ntg.nl] Im
Auftrag von Jaroslav Hajtmar
Gesendet: Freitag, 25.
Hello,
I am trying to get japanese displayed in bibliography. But I get the error
! String contains an invalid utf-8 sequence. while compiling with the
command context *tex.
Here is the tex file :
%%%beginning of file%%
\usemodule[simplefonts]
\setmainfont[hiraginokakugothicpro]
Hi Otared,
On Fri, 25 Nov 2011 09:11:05 -0700, Otared Kavian ota...@gmail.com wrote:
By the way, you had a mistyping in your code:
2. \placelistoftablescws produces an undefined control sequence: What
am I missing here?
………..^
… it should be \placelistoftablecws
Then everything works
I am trying to get japanese displayed in bibliography. But I get the error !
String contains an invalid utf-8 sequence. while compiling with the command
context *tex.
Here is the tex file :
%%%beginning of file%%
\usemodule[simplefonts]
Hello Christian.
Thank you. For the entire block of images it works well. It is
sufficient at this time.
I just wanted to know how to do it if I do not take pictures inside
startcombinations - stopcombinations environment
Jaroslav
Dne 25.11.2011 19:45, Christian napsal(a):
Well, since you
you can also play around with included blanks. I don't know if this is a clean
way, but it's working:
\setupcaptions[number=no,style=\ssxx]
\setupfloats[spacebefore=none, spaceafter=none] %
\starttext
\input tufte
\startplacefigure
\startcombination[3*1]
On 25-11-2011 20:03, Christian wrote:
Same here. It messes up when converting .bib to .bbl. Maybe check your bbl
file, too. Mine looks like this, for example:
a={{Hirofumi Uzawa~宇沢弘文}}
You could try to write the .bbl file directly yourself, although that is not a
comfortable option,
On 25-11-2011 20:01, Idris Samawi Hamid ادريس سماوي حامد wrote:
Hi Otared,
On Fri, 25 Nov 2011 09:11:05 -0700, Otared Kavian ota...@gmail.com wrote:
By the way, you had a mistyping in your code:
2. \placelistoftablescws produces an undefined control sequence: What
am I missing here?
Am 25.11.2011 um 20:26 schrieb Meer, H. van der:
On 25 nov. 2011, at 18:10, Wolfgang Schuster wrote:
Reference is here \reference[label:1]{Some text}\blank
and is: \getreference[tekst][label:1]
tekst ≠ text
Wolfgang,
Thanks for that one. I completely misunderstood, thinking
On 25-11-2011 21:15, Wolfgang Schuster wrote:
It’s a bug (maybe wrong default settings) which was introduced with Idris
request
to have lists which are local to a component, when you refer to the label with
the name of the component as prefix (\getreference[text][part1:label:1]) the
text
is
On 25-11-2011 18:38, Andreas Harder wrote:
Hi,
with the latest beta the following do not work anymore (example from
math-ali.mkiv).
\starttext
\placeformula \startformula \startalign
\NC a \EQ b \NR[+]
\NC c \EQ d \NR
\NC\EQ f \NR[for:demo-a-1]
\NC\EQ g
29 matches
Mail list logo