Hi,
For my particular case:
1. embed u3d models within a pdf without piping to an external script to
compute the view (see http://www.nibua-r.org/ConTeXt/devel/new3dartwork/),
2. the ability to use lua script leads to potential interaction with
MySQL (it could be great for me but I need to
Hi folks,
From line 199 to 206 :
\starttypescript [lucida,lucidabfm] [texnansi,ec,8r,uc]
\definetypeface [lucida] [rm] [serif] [lucida] [default]
[encoding=\typescripttwo]
\definetypeface [lucida] [ss] [sans][lucida] [default]
[encoding=\typescripttwo]
\definetypeface
Compilation says ! I can't find file `texnansi-raw-lbf'
It's better than before : it didn't do anything :-)
Hi Eric,
It may help us if you give us more details:
- the texfont command used,
- did your pfb files are in a single directory or not ? ...
- ...
A good test is:
Eric DÉTREZ a écrit :
I don't use texfont
I compile files from texshop
Ok, I have no knowledge at all regarding texshop, sorry...
- did your pfb files are in a single directory or not ? ...
yes they are with names lbc.pfb and so on
This one was only relevant using texfont...
I had to had
Le 19/03/2012 11:36, Wolfgang Schuster a écrit :
Can you try to attached typescript file, I replaced the files for italic and
bolditalic fonts for the sans style with the names from the latex example
document. The slanted and boldslanted alternatives for the sans style are
also
fixed.
Sorry for this post = redundant .vf files !!!
Renaud AUBIN a crit:
Hi all,
I have lucida fonts installed and the resulting pdf is ok but I obtained
with texexec the following warning:
DVItoMP warning: Checksum mismatch for texnansi-lbr (...or another
lucida font)
I assume
Hi all,
Considering this piece of code:
\section{A title of section}
Here we have some texts
resulting to the following theoretical situation before correction:
at the bottom of the page 1: A title of section
at the top of the page 2: Here we have some texts
Is ConTeXt smart enough
Hi all,
I would reserve a page for several figure (i.e. \placefigure).
\placefigure[page] reserve ONE page for ONE figure...
Can \placefigure reserve a page for several figures with an option I
don't know yet ???
Since I assume \placefigure can do that for me, I don't want to use
:
This is MetaPost, Version 0.901 (Web2C 7.5.3)
(test-mpgraph.mp
currentpen.directdiscretionary
! Improper type.
to be read again
{
l.145 draw origin--(1cm,1cm)\directdiscretionary {
;}
Renaud AUBIN a écrit :
Hi,
I'have updated my local
Hi all,
First, I don't understand this part of the release notes:
"supp-mps.tex:
\startuseMPgraphic and \startusableMPgraphic no longer have an
argument"
Does it mean that we don't have to use \startuseMPgraphic{myMPgrapharg}
... \stopMPgraphic with any myMPgrapharg ?
I assume I've
Hans Hagen a crit:
Renaud AUBIN wrote:
Hi,
I'have updated my local ConTeXt to rel. 2006.07.14 and I obtain :
to be read again
directdiscretionary
l.71 enddef \directdiscretionary
{;}
Cheers,
anything funny
Hi all,
Considering the test http://renojrl.lrv.uvsq.fr/testbed/
I have some problems using lucida:
texexec gives some warnings:
kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 0+420/600 --dpi
420 texnansi-raw-lbr
mktexpk: don't know how to create bitmap font for texnansi-raw-lbr.
}}
\stopcombination}
Renaud
You don't know: READ THE MANUAL OR CHECK THE WIKI !!! ;)
Renaud AUBIN a crit:
Hi all,
I would reserve a page for several figure (i.e. \placefigure).
\placefigure[page] reserve ONE page for ONE figure...
Can \placefigure reserve a page for several figures with an option I
=no] is the best,
- for display rendering, the use of
\setupcolors[cmyk=yes,mpcmyk=yes,conversion=yes] is the best.
Am I right ?
Renaud
%D
%D file=logouvsq_mp,
%Dversion=2006.07.20,
%D title=UVSQ logo,
%D author=Renaud Aubin,
%D copyright=Public Domain
%C
%C
Where is the alpha release please ;)
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Sorry, I've just found it !
Renaud AUBIN a écrit :
Where is the alpha release please ;)
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
___
ntg
a crit:
Aditya Mahajan wrote:
On Tue, 18 Jul 2006, Aditya Mahajan wrote:
On Tue, 18 Jul 2006, Hans Hagen wrote:
Renaud AUBIN wrote:
Hi all,
Considering the test http://renojrl.lrv.uvsq.fr/testbed/
I have
Hi all,
http://blogs.adobe.com/arena/2006/07/new_version_of_reader_availabl.html
Cheers,
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
I must precise: for linux !!!
Renaud AUBIN a crit:
Hi all,
http://blogs.adobe.com/arena/2006/07/new_version_of_reader_availabl.html
Cheers,
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl
Hi all,
What's new on this topic ?
Since 3D is now supported by acroread linux, I would know if we can do
that with ConTeXt... I'll take a look at
https://sourceforge.net/projects/u3d in order to try to provide some
samples...
Renaud
Hans Hagen a crit:
Matthias Weber wrote:
Hans Hagen a crit:
Renaud AUBIN wrote:
Hi all,
What's new on this topic ?
Since 3D is now supported by acroread linux, I would know if we can do
that with ConTeXt... I'll take a look at
https://sourceforge.net/projects/u3d in order to try to provide some
samples...
R
Hans Hagen a écrit :
ah, i introduced so the name gets lost (btw, in your test file, the
label is wrong (i think)
\def\dostartstaticMPfigure#1#2\stopstaticMPfigure
{\startstaticMPgraphic{\jobname-#1}#2\stopstaticMPgraphic
\def\MPgraphicfile{\jobname-#1}%
done see Re: [NTG-context] U3D (embedded 3D objects) 23.07.2006 02:27
Hans Hagen a crit:
[EMAIL PROTECTED] wrote:
I'm just working on this... I have succeeded in compiling U3D
viewer/converter/etc. for linux... I'll try to provide some custom made sample
from CAD program (windows
Hans Hagen a crit:
my guess is that trying to reverse engineer latex code will cost me more
time that doing it directly the context way; the only thing that i need
is the relevant annotation specs (someplace in the pdf manual)
(in context such code ends up in the drivers and it needs to
Hi all,
Considering the following example:
%%%
\setupindenting[medium,yes]
\setupformulas[indentnext=yes]
\setupheads[indentnext=yes]
\setupfloats[indentnext=yes]
\starttext
\startuseMPgraphic{mympgraph}
numeric u; u:=2cm;
draw (-u,-u)--(u,u);
draw
Hans Hagen a écrit :
indeed pdfannot is what we need; however, the first thing is to figure out what kind of control we want (probably best from within _javascript_); in your sampe i see pretty raw pdf code in the key/val pairs, which is something alien to context
- what features make
Peter Münster a écrit :
On Tue, 25 Jul 2006, Renaud AUBIN wrote:
Perhaps related to http://context.literatesolutions.com/collector/65 ?
Cheers, Peter
Maybe, but dunno... These problems are probably due to the same bug...
Renaud
___
ntg-context
Hans Hagen a écrit :
indeed pdfannot is what we need; however, the first thing is to figure out what kind of control we want (probably best from within _javascript_); in your sampe i see pretty raw pdf code in the key/val pairs, which is something alien to context
- what features make
Renaud AUBIN a écrit :
How to
do that in the ConTeXt way ? ;) I have read spec-tpd.tex but
didn't know much...
Take care of the heart attack (I've done it the rookie way,
reversed from movie15)
\starttext
\xdef\uthreedfilename{pa10}
\pdfobj {/Subtype/P/FOV 30/PS/Min
Hi,
The ConTeXt term is now in development.
You have at least two or three alternatives (with one prefered
but in dev):
- use postscript term and include the resulting graphics with
externalfigure
- use mp term and process the MP buffer with metafun
- last but not least, use directly the
Steffen Wolfrum a crit:
The bib module won't help (I assume): the bibliography is already
typed, not generated.
Steffen
Hi Steffen, Aditya,
I'm agree with Aditya, Taco can surely help on this point...
I'm also interested by this feature (to Taco: since IEEE bib formatting
follows
Hi Steffen,
Can you provide some working sample code (two or three typical entries
+ wrap with \start/stopitemize) ?
Is your bibliography big ? I assume your this work is urgent and you
can't make a .bib, right ?
Renaud
Steffen Wolfrum a crit:
Am 27.07.2006 um 08:05 schrieb Aditya
Taco Hoekwater a écrit :
It would not be very hard to add this feature to the module,
but that will probably not help Steffen in this case.
Taco
Yes, but you're also a ConTeXt guru, no ? ;)
PS to Taco: No more time for #context ?
Renaud
___
Hi all,
Same problem when \placefigure[auto] is used...
Is there a chance that this bug will be corrected before the beginning
of september ? ;)
(if this is a bug...)
Renaud AUBIN a crit:
Hi all,
Considering the following example
Hi all,
Here is a test document with french indentation (placefigure and
placetable are tested with bottom, here, top and auto options):
\setupindenting[medium,yes]
\setupformulas[indentnext=yes]
\setupheads[indentnext=yes]
\setupfloats[indentnext=yes]
\starttext
\startuseMPgraphic{dummygraph}
Hi all,
How to control vertical spaces between references ?
(\setuplist options ? I have tried some but nothing happened...)
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Hi Taco,
An extra line was due to
\def\setuppublicationlayout[#1]#2%
{\setvalue{@@pvdata#1}{#2\unskip\unskip\vadjust{\kern 12pt}}}
in my bibl-aub.tex
;)
Cheers,
Renaud
Taco Hoekwater a crit:
Renaud AUBIN wrote:
Hi all,
How to control vertical spaces between references
Hi all,
I use lucida for a document and now I need some bold math fonts so I
have followed the instructions given in "This Way - Mixed Normal and
Bold Math". The resulting test file is:
\starttext
\usetypescript[lucida] [texnansi]
\usetypescript[lucidabfm] [texnansi]
Good Morning Taco,
It works, thanks...
Taco Hoekwater a crit:
Renaud AUBIN wrote:
Hi all,
I use lucida for a document and now I need some bold math fonts so I
have followed the instructions given in "This Way - Mixed Normal and
Bold Math". The resulting
But there is a problem with \startformula[lucida] 1 \Gamma {\bfm \alpha
x} \stopformula i.e. the "x" is not in bold rm...
Renaud AUBIN a crit:
Good Morning Taco,
It works, thanks...
___
ntg-context mailing list
ntg-cont
texfont prints out the typo error too (LucidaNewMath-Demibold)... How
can we change this ? (this font entry in texnansi-bh-lucida.map is
LucidaNewMath-Demibold)
Renaud AUBIN a crit:
But there is a problem with \startformula[lucida] 1 \Gamma {\bfm \alpha
x} \stopformula i.e. the &q
Hi all,
Some times ago, Taco helps me to define a custom itemize:
\setbox0=\hbox{--~}
\def\indenteddash#1{\hskip\parindent--~}
\definesymbol[indentdash][\indenteddash]
\setupitemize[each][indentdash,packed,joinedup,intext][indentnext=yes,width=\dimexpr
\parindent + \wd0 \relax]
The result
Hans, can you help on this one ?
After checking the lucida's afm, it appears that the correct name of
type-buy.tex's LucidaNewMath-DemiBold is LucidaNewMath-Demibold...
I have corrected type-buy.tex but \startformula {\bfm R} \stopformula is
LucidaNewMath-AltItalic... I have understood Mixed
% frenchitemize
\setbox0=\hbox{--~}
\def\indenteddash#1{\hskip\parindent--~}
\definesymbol[indentdash][\indenteddash]
\def\startfrenchitemize{\startitemize[indentdash,packed,joinedup,intext][indentnext=yes,width=\dimexpr
\parindent + \wd0 \relax]}
\def\stopfrenchitemize{\stopitemize}
%
Hi,
A suggestion for the next release:
diff type-buy.tex type-buy.tex.20060804
114c114
\definefontsynonym [MathBeta] [LucidaNewMath-Demibold]
---
\definefontsynonym [MathBeta] [LucidaNewMath-DemiBold]
123c123
\definefontsynonym [MathBetaBold] [LucidaNewMath-Demibold] %
See http://renojrl.lrv.uvsq.fr/testbed/character_alignment_bug.pdf,
freshly processed...
Taco Hoekwater a crit:
Nicolas Grilly wrote:
Hereunder is the output of texexec --check on
my computer. Everything
seems okay. Can you send me your test file in order I launch it on my
topformula
doesn't match the one displayed in "This Way" (\startformula[lucida] 1
\Gamma {\bfm \alpha x} \stopformula returns Demi in "This Way" and
Math-AltItalic in my test file)... Odd or not ?
Renaud
Hans Hagen a crit:
Renaud AUBIN wrote:
DemiBold causes p
\placeformula
\startformula[lucidaboldmath]
1 \Gamma {\bfm \alpha x}
\stopformula
please and compare with
http://www.pragma-ade.com/general/magazines/mag-0005.pdf where you say
"For Lucida lovers, we prepared some typescripts that provide (mixed)
bold math." page 5
Hans Hagen a crit:
Re
Same thing happens here... (Aditya was faster... ;) )
Renaud
Aditya Mahajan a crit:
Something broke with formula numbering, and it is due to the numbering
changes. \preparethenumber is commented from core-sec.tex,
dododoformulanumber in core-mat.tex still uses it. As a result even
the
What's the meaning of automatically calls bibtex now.
We don't have to call:
texexec --once mydoc
bibtex mydoc
texexec mydoc
anymore ?
Renaud
Taco Hoekwater a écrit :
Hello all,
I am pleased to announce that the new ConTeXt release from Hans Hagen
can be downloaded as of now from the Pragma
I have finally read bibmode-doc... (Sorry to pollute the ML with dumb
post...)
Renaud AUBIN a écrit :
What's the meaning of automatically calls bibtex now.
We don't have to call:
texexec --once mydoc
bibtex mydoc
texexec mydoc
anymore ?
Renaud
Hi all,
Considering the following example, there is a problem with \bfm \omega
in the align environment... I observed the same problem with the matrix
environment... Any idea how to solve the problem ?
\starttext
\usetypescript[lucida] [texnansi]
\usetypescript[lucidabfm] [texnansi]
Correction: the problem occurs only with align
Renaud AUBIN a crit:
Hi all,
Considering the following example, there is a problem with \bfm \omega
in the align environment... I observed the same problem with the matrix
environment... Any idea how to solve the problem
ok, but then omega is not bold anymore...
Taco Hoekwater a écrit :
Adding this redefinition of \bfm helps
\def\bfm{\noexpand\boldfacemath} % \noexpand added
Taco
___
ntg-context mailing list
ntg-context@ntg.nl
\define\tildedomega{\hbox{$\tilde{\bfm \omega}$}} and use \tildedomega
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
What happens with \placefigure[here]{none}{\externalfigure[Figure1]} ?
Renaud
The Wizard a écrit :
All -
I am experiencing some strange behavior with external graphics. I
use one file to setup all the graphics for later inclusion. All that is
in the file is a bunch of \useexternalgraphics
The Wizard a écrit :
I also tried the answer offered by Renaud,
\placefigure[here]{none}{\externalfigure[Figure1]}, which results in
no figure at all.
adapt Figure1 - Figure 1 according to your useexternalfigure declaration...
\placefigure[here]{none}{\externalfigure[Figure1]
An example
Hi all,
A friend of mine pointed out TeXmaker:
http://www.xm1math.net/texmaker/index.html
Since I have not tried it, I can't say if one could use it with
ConTeXt... For those who liked graphical editor: give it a try
Cheers,
Renaud
___
Hi all,
I often use placefigure like the following example:
\useexternalfigure[robhaz-iraq][src/images/robhaz_iraq_06][height=4cm]
\useexternalfigure[robhaz-rescue][src/images/robhaz_rescue_06][height=4cm]
\placefigure[here][fig:robhaz]{ROBHAZ-DT3}{
\startcombination[2*1]
Hi all,
Considering {\bf Renaud {\sc Aubin}} with lucida, I assume that "Aubin"
will be typesetted using LucidaBrightSmallcaps-Demi. I was one more
time wrong... I have check type-buy and there is no SerifBoldCaps
defined for lucida... \bc doesn't seem to work either.
Is it possible to add
Hi all,
I would try to design a figure like
http://www.nibua-r.org/ConTeXt/sample.png
FLOWcharts seems to be a good tool to do that, but I have some troubles
to get "Simulation" and "Colision Detection" frames...
First, I thought of a meta-flowchart but I'm not sure that's possible.
Any
Renaud AUBIN a crit:
I would try to design a
figure like
http://www.nibua-r.org/ConTeXt/sample.png
FLOWcharts seems to be a good tool to do that, but I have some troubles
to get "Simulation" and "Colision Detection" frames...
I have done a first sample: ht
Hi all,
\placefigure
[none]
{}
{\startcombination
{\externalfigure[hylos]}{\placefloatcaption[figure]{Hylos}}
{\externalfigure[shrimp]}{\placefloatcaption[figure]{Shrimp III}}
\stopcombination}
returns
./src/images/hylos.jpg
figures : dimensions of ./src/images/hylos.jpg loaded from
Renaud AUBIN a crit:
Hi all,
\placefigure
[none]
{}
{\startcombination
{\externalfigure[hylos]}{\placefloatcaption[figure]{Hylos}}
{\externalfigure[shrimp]}{\placefloatcaption[figure]{Shrimp III}}
\stopcombination}
returns
./src/images/hylos.jpg
figures : dimensions
Hi Hans,
! I can't find file `core-trf.tex'.
l.381 \input core-trf.tex
Cheers,
Renaud
Hans Hagen a écrit :
Hi,
I uploaded a new beta. There is not so much new functionality (if so,
taco will report that when there is a new release), but
- some reshuffling of code (in order to solve some
Hans, do you agree to add
\definefontsynonym [SerifBoldCaps] [LucidaBrightSmallcaps-Demi]
to type-buy.tex (\starttypescript [serif] [lucida] [name]) ?
Renaud
___
ntg-context mailing list
ntg-context@ntg.nl
Hans Hagen a écrit :
So, the big question here is does graphic inclusion work as expected
Hans,
\scale seems to be broken...
\starttext
\startuseMPgraphic{dummygraph}
numeric u; u:=2cm;
draw (-u,-u)--(u,u);
draw ((-u,-u)--(u,u)) rotated 90;
\stopuseMPgraphic
\starttext
\startuseMPgraphic{dummygraph}
numeric u; u:=2cm;
draw (-u,-u)--(u,u);
draw ((-u,-u)--(u,u)) rotated 90;
\stopuseMPgraphic
\placefigure[here]{none}{\useMPgraphic{dummygraph}} - euh... work ;)
\placefigure[here]{none}{\scale[sx=.5,sy=.5]{\useMPgraphic{dummygraph}}}
- doesn't work !
Hi all,
I wanted to obtain to obtain an homogeneous formatting for my captions
whenever I use \placefigure or \placefloatcaption within combination,
so I've tried \setupcaption and \setupcaptions but
\starttext
\setupcaptions[align=left] % or \setupcaption[figure][align=left]
Renaud AUBIN a crit:
Hi all,
I wanted to obtain to obtain an homogeneous formatting for my captions
whenever I use \placefigure or \placefloatcaption within combination,
so I've tried \setupcaption and \setupcaptions but
...
Bug ? BTW, I need a quick solution for my PhD
Hi all,
Considering the following sample:
\starttext
\placelistoffigures[alternative=c,criterium=all,interaction=all,partnumber=no]
\useexternalfigure[testfig][cow][width=.5\textwidth]
\startbuffer
\placefigure[here]{test 1}{\externalfigure[testfig]}
\placefigure[here]{test
Wolfgang Schuster a écrit :
Can you send a PDF of your file, I have no problems with your example
an get the result you wanted.
ConTeXt ver: 2006.08.08 21:51 fmt: 2006.9.5 int: english mes: english
ConTeXt ver: 2006.09.07 17:50 MK II fmt: 2006.9.8 int: english/english
Which ConTeXt
Can you send a PDF of your file, I have no problems with your example
an get the result you wanted.
ConTeXt ver: 2006.08.08 21:51 fmt: 2006.9.5 int: english mes: english
ConTeXt ver: 2006.09.07 17:50 MK II fmt: 2006.9.8 int: english/english
Which ConTeXt version do you use.
Wolfgang
Wolfgang Schuster a écrit :
\setuphead[chapter][after=\dowritebetweenlist{figure}{\blank[big]}] % the magic
Hi Wolfgang,
the magic is ... magic and do the trick...
Thank you very much... (I send my PhD dissertation tomorrow ;) )
Renaud
___
Hi all,
Is it possible to run a ruby script from a context document during its
processing (I already know how to do that using \write18 but there is
maybe a better way...) then get the output of the script to display or
use it into the document. It's a little bit hard to describe so I have
a
Hi all,
I'm now playing with u3d and since I'm at rookie level in ConTeXt dev,
I have (a lot?) of questions for you.
First, download http://www.nibua-r.org/ConTeXt/devel/3dartwork.tgz
and "texexec test-3dartwork". Since I use \externalfigure and u3d mean
nothing to ConTeXt, I obtain
TeXUtil
Hi Hans,
Hans Hagen a crit:
Ok, this is normal... I used \placefigure and \externalfigure for
convenience for the moment since I found natural to use them... How to
bypass RlxTools ?
hm, maybe we need a feature to mark a category as non-rlx-able
for the moment use
\starttext
\input "|ls"
\stoptext
leads to
(/usr/share/texmf-tetex/tex/latex/tools/.tex File ignored)
Runaway argument?
ls"
! Paragraph ended before \next was complete.
to be read again
\par
???
Taco Hoekwater a crit:
Hans Hagen wrote:
piping: the latest versions of
Taco Hoekwater a crit:
The
pipe symbol has to be non-active (\catcode`\|=12 )
Taco
\starttext
\catcode`\|=12
\input "|ls -l"
\stoptext
! I can't find file `"|ls -l"'.
l.7 \input "|ls -l"
___
ntg-context mailing list
ntg-context@ntg.nl
Taco Hoekwater a écrit :
And all you need now is the latest pdftex -)
http://sarovar.org/project/showfiles.php?group_id=106release_id=752
Taco
Thanks
Yes, I finally realized that... ;) I'm now on my way to upgrade it...
___
ntg-context
Taco Hoekwater a écrit :
And all you need now is the latest pdftex -)
http://sarovar.org/project/showfiles.php?group_id=106release_id=752
Taco
Is it normal that pdfetex.pool is no more built ?
___
ntg-context mailing list
ntg-context@ntg.nl
Hi all,
The 3dartwork module can be found here:
http://www.nibua-r.org/ConTeXt/devel/3dartwork.tgz
Someone could maybe process test-3dartwork on a windows machine and
report if there is trouble...
Warning: The use of the "piping" syntax is only possible with the last
pdfTeX (thanks to
Hi all,
I would use fieldstack with \getbuffer and overlays... Why the
following code doesn't work ? Is there another way to do that ?
TIA
Renaud
%%% stack.tex
\setupcolors[state=start]
\usemodule[pre-original]
\defineoverlay[FunnyFrame][\useMPgraphic{FunnyFrame}]
Hi all,
After several trial-error experiments, I obtained what I want with the
attached code. I use only one background for the frames within
definesymbol because the use of several background failed (only the
last one is eventually displayed). Now, I would like to know if it is
possible to
Hi Peter, all,
What I can think of is to initialize the random seed value of MP (name?)
with the same value, every time before you fill a new layer. Another way
would be to add the 'random' parameters to your FrameTitle macro. But I
don't have much experience with random stuff, so there maybe
Hi folks !
Consider the working example:
\usemodule[pre-original]
\starttext
\startbuffer[stack1]
draw (0,0)--(10cm,10cm);
\stopbuffer
\startbuffer[stack2]
draw (0,10cm)--(10cm,0);
\stopbuffer
\startbuffer[stack3]
draw (0,5cm)--(10cm,5cm);
\stopbuffer
\definesymbol[step
Hi all,
I have tried to embed an U3D model within a presentation of mine and
pre-original interactions inhibit the U3D interaction...
The problem is described by
http://www.nibua-r.org/ConTeXt/devel/context3d.tgz
How to inhibit locally the interaction setted by pre-original ?
I have tried
Hi all,
I'm trying to make a custom presentation style using pre-original.
Considering the following piece of code extracted from s-pre-01.tex
\startinteractionmenu[right]
\placelist
[Topic]
[alternative=f, % command, % none,
maxwidth=\hsize,
width=\hsize,
offset=0pt,
criterium=all,
A solution consists to use \setuptexttexts[][] then
\setuptexttexts[\GotoNextPage][] on the next slide to recover the
\GotoNextPage behavior
Renaud AUBIN a crit:
How to
inhibit locally the interaction setted by pre-original ?
___
ntg
Maurício a écrit :
Has anyone ever tried to use Context to create music CD labels? Any
tips on what should I do, pages I can read or results I can expect?
Hi Mauricio,
I have never tried to create CD labels but from my experience you should
use overlay... Could you describe the geometry of
Maurício a écrit :
I don't have the exact dimenstions. You can check it here (Open
Office document):
www.pimaco.com.br/files/gabaritos/Gabarito_CDpply_CARTA.sxw
dead link... but it's ok with the word gabaritos... The format you use
is letter, right (just to be sure since here we use A4)
Hi all,
Considering the fact that I have no answer for the thread
"[NTG-context] Presentation style: customizing the right interaction
menu (list-related thread)", I decided to reformulate my problem...
After some experiments, I have the following code:
\definehead [Topic] [chapter]
Maurício a écrit :
It's working now, I've just downloaded that file. I belive that paper
is letter, although A4 is usually a lot more common here.
Sections are not that important, as long as I can have different
formats for some lines of text, and I'm sure that's not a problem. For
Maurcio a crit:
Hi,
When I use \externalfigure inside of \placefigure, Context can only
find filenames in the current directory, i.e., the directory where I'm
executing texexec. How can I instruct Context to look for files on the
same directory of my .tex file?
Thanks,
Hi Hans,
I succeed to do what I want thanks to you (once more ;) ) !
I'll put the resulting presentation online at least at the end of the
next week (u3d + layer + custom pre-original + animation with JS and
fieldstack + program runs including mplayer runs with linux + ...
robotics ?)
Hi Victoria,
At first, draw a mouth-like shape as a closed path with metapost then
read http://www.pragma-ade.com/general/manuals/metafun-s.pdf (pages
399--424).
The ML is a good source too (See "[NTG-context] Context and CD labels"
for example)...
Renaud
Victoria Brown a crit:
How do I
Hi Frank,
A ConTeXt's package for debian will be great !
Frank Küster a écrit :
Hi everybody,
this mail has a double purpose. At the end, there's a call for testers
of a new (planned) Debian ConTeXt package that would be updated more
frequently than now (at least in unstable and testing),
Hi all,
Maybe some of yours (from the ConTeXt POV) can be interested by my PhD
dissertation and my presentation (both in french)...
http://www.nibua-r.org/ConTeXt/PhD/
The slides are made to work under linux with sh script to run mplayer
or custom simulations... These scripts will obviously
Hi M.J.,
M.J. Kallen a écrit :
Maybe Renaud can tell us a little more about the details of the typesetting?
What font did you use and what program did you use to make the plots (I
particularly like the fact that the font in the plots is the same as in the
text!), it reminds me a little of R
"NTG ConTeXt Renaud Aubin", you'll have an idea of my step by
step approach to PhD writting with ConTeXt... ;)
I'll clean up, comment the source and put it online asap. You can find
the source here (for the moment):
http://renojrl.lrv.uvsq.fr/perso/projects/ph
1 - 100 of 297 matches
Mail list logo
