I am using: \margindata[]{group to isolate change e.g. {\rm \it etc}}
yours sincerely
dr. Hans van der Meer
> On 19 Mar 2024, at 15:38, Jeroen wrote:
>
> For comments that are placed in the margin, the \inleft{}, \inouter{} etc
> will place text in the margin in bold. C
sy=1.001 in order to get the original height. Although not to difficult with a jump to Lua code, I would prefer not.yours sincerelydr. Hans van der Meer\starttext\ConTeXt\space version \contextversion\blank\type{\externalfigure[testfile.jpg]} source figure\crlf\externalfigure[testfile.jpg]\crlf\t
Yes, that is a possibilty that did not escape me. But this is but an example.
In those documents such abbreviations are quite common and frequent.
I hoped therefore to find a generic solution!
yours sincerely
dr. Hans van der Meer
> On 2 Feb 2024, at 18:25, Hans Hagen via ntg-cont
, because voors[chreeve] in the
example will not be hyphenated as if the []'s were absent. Which is what I
would like to happen.
Question: is it possible to realize this and how?
yours sincerely
dr. Hans van der Meer
Just did 'sh install.sh' a moment ago without problems.
In the past I had to do xattr -d com.apple.quarantaine path-to-executable once
but not anymore.
I think the xattr resides in the Apple command tools. Are you sure you have
them?
yours sincerely
dr. Hans van der Meer
> On 23 Jan 2
Here too, I find 'undefined' from \meaning\expandeddetokenize
yours sincerely
dr. Hans van der Meer
> On 22 Nov 2023, at 21:55, Aditya Mahajan wrote:
>
> On Wed, 22 Nov 2023, Wolfgang Schuster wrote:
>
>> Hans van der Meer schrieb am 22.11.2023 um 21:22:
>>>
is as simple as can be.The filename is test.jpeg, then this runs ok:\starttext\externalfigure[test.jpeg][]\stoptextBut this crashes, see the log:\starttext\externalfigure[test.jpg][]\stoptext
yours sincerelydr. Hans van der Meer
showlayout.log
Description: Binary data
in the middle, but doesn't.The textwidth is narrowed but the margins refuse to obey their setting.
yours sincerelydr. Hans van der Meer\setuppapersize[A4][A4]\setuplayout[leftmargin=40mm,rightmargin=60mm,textwidth=110mm]\showframe\starttextsetuplayout: leftmargin=40mm, rightmargin=60mm, textwidth=110mm
I would like to change the width of the margins on the page.In the MWE here, the pagelayout does not seem to obey the \setuplayout command. Why are the margins shown uneffected by \setuplayout?
yours sincerelydr. Hans van der Meer
showlayout.pdf
Description: Adobe PDF document
sincerelydr. Hans van der Meer
% test pagenumbering start-stop\setuppapersize[A5][A5]\starttext\setuppagenumbering[state=stop]\ConTeXt\space\contextversion\blankThis is page 1 without pagenumber.\crlf\page\setuppagenumbering[state=start]This should be a page with pagenumber 2.\crlfBut the pagenumber
is either top, bottom or
center.
Such an option might not exist and then I must program around it. But I prefer
to use something that is already there and fits my needs.
yours sincerely
dr. Hans van der Meer
___
If your
I cannot get \xmlinclusion working. Below an MWE with its output. What I am missing here or is \xmlinclusion not ok?\startxmlsetups demo \xmlsetsetup{#1}{ root|test }{demo:*}\stopxmlsetups\xmlregisterdocumentsetup{demo}{demo}\startxmlsetups demo:root \blank{\bf Start test}\crlf
But there is also
\ifxmlattempty{#1}{prefix} .. \else .. \fi
yours sincerely
dr. Hans van der Meer
> On 17 Oct 2023, at 13:37, Taco Hoekwater wrote:
>
>
>
>> On 17 Oct 2023, at 12:43, Michael Guravage
>> wrote:
>>
>> Hi,
>>
>> I
I find offline documentation in the installed ConteXt files in
ConTeXt/tex/texmf-context/doc/context/documents/general/manuals
with more in neighboring directories. Hope this helps.
met vriendelijke groet,
dr. Hans van der Meer
Burgemeester Rijnderslaan 244 ingang D
1185 MC Amstelveen
tel. 020
that the call to \rotate is the culprit.I enclose an MWE with a little jpeg figure as illustration.
yours sincerelydr. Hans van der Meer\def\formattitle#1{\color[\boxtitlecolor]{#1\strut}}\def\boxfigurerotate#1#2{% \rotate[rotation=10]% {% \externalfigure[#1]% [rulethickness=4pt,width=100pt,height=50pt
on this subject. I added the relevant portion of the code for clarity.I am sure the next update will reflect it in the source ;-)dr. Hans van der Meer implement { name = "ifxmlselfempty", public = true, usage = "condition", arguments = "
Is it possible that the new \ifxmlselfempty has reversed its outcome? Or did I something wrong in this MWE?Here an MWE.
yours sincerelydr. Hans van der Meer
xmlsetup-template.pdf
Description: Adobe PDF document
\startbuffer[test]!not empty node!\stopbuffer\startxmlsetups xml:mysetups
Finally I saw the problem. Calling
\xmlfilter{#1}{./node/command(demo:attribute:node)} is the right way.
Sorry for the noise.
dr. Hans van der Meer
> On 30 Aug 2023, at 13:49, Hans van der Meer via ntg-context
> wrote:
>
> This line of code comes from the xml documentat
te-select.pdf
Description: Adobe PDF document
Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/l
community (for which I care) in a
less favourable light.
yours sincerely
dr. Hans van der Meer
> On 7 Aug 2023, at 19:57, Henning Hraban Ramm wrote:
>
> Am 07.08.23 um 19:20 schrieb Hans van der Meer via ntg-context:
>> I would say: Don't use this one. This sticker could
I would say: Don't use this one. This sticker could be interpreted as having a sexual connotation and that is not the way (excuse the Mandalorian).
yours sincerelydr. Hans van der Meer
On 7 Aug 2023, at 19:13, Henning Hraban Ramm wrote:Hi,while it’s too late for this year’s conferences, I’d
e.
yours sincerely
dr. Hans van der Meer
> On 21 Jul 2023, at 12:37, denis.ma...@unibe.ch wrote:
>
> Hi,
>
> I’m typesetting an XML document where the links to the images contain spaces
> which are encoded as %20
>
>
> Using this works in cases without spaces:
&
r enlightment and not too old to learn.
yours sincerely
dr. Hans van der Meer
> On 16 Jul 2023, at 14:08, Hans Hagen via ntg-context
> wrote:
>
> On 7/16/2023 1:31 PM, Hans van der Meer via ntg-context wrote:
>> What happened to \hidewidth? It looks as if it disappeared. See the
in enco-ini.mkxl.I dare say, with all due respect, it is not pleasant (and a waste of time) to find working code suddenly broken because of leftout macro's. And I feel lucky to not having used \ialign, because something similar happened to it.
yours sincerelydr. Hans van der Meer
hidewidth.pdf
I cannot get rid of some depth in framed. Used various combinations of the depth and backgrounddepth setting, nothing helps.What am I doing wrong? Or is something in \framed not working in the way I expected?See the accompanying MWE.
yours sincerelydr. Hans van der Meer
framedepth.pdf
After transferring the context directory to my new M2 Mac Studio sh.install.sh
complains "Your system "Darwin arm64" is not supported (yet)". What now? I
cannot live without TeX-ing 沈
yours sincerely
d
\rightarrowfill x x \leftarrowfill xyours sincerelydr. Hans van der Meer
hboxarrowfill.pdf
Description: Adobe PDF document
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg
be needed.
yours sincerelydr. Hans van der Meer
hboxarrowfill.tex
Description: Binary data
hboxarrowfill.pdf
Description: Adobe PDF document
___
If your question is of interest to others as well, please add an entry
Why do the \rightarrowfill and \leftarrowfill not show up in the accompanying MWE?
yours sincerelydr. Hans van der Meer
hboxfill.pdf
Description: Adobe PDF document
hboxfill.tex
Description: Binary data
hboxfill.log
Description: Binary data
Of course. But without that \enabledirective I can redefine the frozen macro at
will, as a simple test did show.
The crux, however, is that one wants to protect the frozen code always,
irrespective of that directive setting.
dr. Hans van der Meer
> On 12 Jun 2023, at 19:47, Hans Hagen via
What happened to the non breaking space in XML? It has disappeared in a way. See the minimal example attached.dr. Hans van der Meer
test-nbsp.pdf
Description: Adobe PDF document
___
If your question is of interest
> On 12 Jun 2023, at 11:12, Hans Hagen via ntg-context
> wrote:
>
> On 6/12/2023 10:57 AM, Hans van der Meer via ntg-context wrote:
>> The manual LMTX-primitives on page 21 tells me:
>> You can explicitly freeze an unfrozen macro.
>> ...
>> A r
}
\letfrozen\HOME
\writestatus{2}{\meaning\HOME}
\def\HOME{other home}
\writestatus{3}{\meaning\HOME}

Is this mechanism broken? It looks so useful to prevent accidental redefinition!
dr. Hans van der Meer
Hans,
I see this as a no with respect to changing the behaviour of \small and
friends. Which I can well understand: changes on this level may trigger a lot
of unwanted problems.
But now I can program around it with a clear conscience;-)
dr. Hans van der Meer
> On 30 May 2023, at 11:33, H
the same result?
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage
d retrieve the current style and
reset that after a size command. I rather would refrain from tinkering with
those. Since there is a \currentxfontsize is there an analogue for the style?
dr. Hans van der Meer
___
If you
[] i.e. returns nothing
expecting a number
return=[\xmlfilter{#1}{../index()}] returns [0] expecting a number larger
than 0
return=[\xmlfilter{#1}{./index()}] returns [0] expecting a number larger
than 0
dr. Hans van der Meer
\def\relationsFontSize{8pt}\starttextHello World!\crlf\switchtobodyfont[\relationsFontSize]Hello, world!\stoptext
Untitled.pdf
Description: Adobe PDF document
dr. Hans van der MeerOn 19 May 2023, at 11:43, Gerben Wierda via ntg-context wrote:I want to use a variable for a font size so I can set
now
>
> -- before installing uninstalls a previous installation
> -- can uninstall an installed module
> -- can list installed modules
>
Please don't do this! I fear it will break my habit of keeping older versions
that worked for me. As a safeguard against things that are broken and wi
e .
yours sincerely
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-conte
that part of
the input? I examined files lxml-ent.lua and lxml-tex.lua but could not find
how to this.
dr. Hans van der Meer
> On 17 Apr 2023, at 18:11, Hans van der Meer via ntg-context
> wrote:
>
> I tried
> \directlua{xml.registerentity("DATE","NEWDATE")}
&g
:
function xml.registerentity(key,value)
entities[key] = value
if trace_entities then
report_xml("registering entity %a as %a",key,value)
end
end
> On 17 Apr 2023, at 12:32, Hans van der Meer wrote:
>
> I would like to change an entity 'on the fly'. Example
> Use \xmltexentity
Already tried this. But doesn't work. I guess it has more to do with the
definition of the entity in the stsrem.
met vriendelijke groet,
dr. Hans van der Meer
Burgemeester Rijnderslaan 244
1185 MC Amstelveen
tel. 020 6452701 / 06 53743629
> On 17 Apr 2023, at 13:00,
and never in
NEWDATE.
How can I change the value of the entity inside the xmlsetups?
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg
How can ik access the tex library in pure Lua for tex.sprint and token.setmacro?
I guess something like
require XYZ
?
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry
> On 28 Aug 2022, at 19:07, Pablo Rodriguez via ntg-context
> wrote:
>
> On 8/28/22 12:25, Hans van der Meer via ntg-context wrote:
>>
>> With \directlua{context(md5.hex([===[#1]===]))} I can calculate the MD5
>> checksum.
>> I thought there was another
With \directlua{context(md5.hex([===[#1]===]))} I can calculate the MD5
checksum.
I thought there was another call for the calculation of the SHA checksum, but I
could not find it in the documentation or on the context garden.
Where to look?
dr. Hans van der Meer
Storing in a memory block in the computers' internal memory would be super, of
course. But I am afraid that is asking a bit too much;-)
dr. Hans van der Meer
> On 18 Jul 2022, at 18:31, Hans Hagen via ntg-context
> wrote:
>
> On 7/18/2022 3:20 PM, Fabrice L via ntg-context wr
Can't you use an editor with grep, searching for something like the pattern
(with appropriate escapes of course).
dr. Hans van der Meer
> On 16 May 2022, at 17:08, Pablo Rodriguez via ntg-context
> wrote:
>
> Dear list,
>
> I would like to feed
> https://s
> tex.print("\string\\latinmodern")
should be at least double backslashes: tex.print("\\string\\latinmodern") I
would think
met vriendelijke groet
dr. Hans van der Meer
> On 13 Oct 2021, at 18:01, Hans Åberg via ntg-context
> wrote:
>
> I was suggested
their location in the .bashrc.
# The current version of the ConTeXt luametatex in use:
CONTEXTLMTX=/Volumes/REALM/TeX/context
export CONTEXTLMTX
PATH=$CONTEXTLMTX/tex/texmf-osx-64/bin:$PATH ; export PATH
dr. Hans van der Meer
> On 8 Sep 2021, at 12:46, Hans van der Meer via ntg-context
>
empty line.
What happens inside \usemodule to cause this? I confess being baffled. And how
to convince ConTeXt to find all my modules?
dr. Hans van der Meer
___
If your question is of interest to others as well, plea
And \ListSort[[abc]]{value} turns out to be worse: doesn't makes it into LuaTeX
at all.
dr. Hans van der Meer
> On 5 Sep 2021, at 10:14, Hans van der Meer via ntg-context
> wrote:
>
> There is something I do not understand in the passing of parameters from TeX
> to LuaTex.
&
interface?
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http
I guess the underlying library calls are from Lua5.4? Then it is perhaps useful
to know that between 5.3 and 5.4 there is mentioned a new implementation for
math.random. Perhaps it changes the sequence of random values generated?
Someone who knows?
dr. Hans van der Meer
> On 23 Aug 2
\else\let\FlushModule\FlushTEX\fi
dr. Hans van der Meer
> On 17 Aug 2021, at 15:49, Hans van der Meer via ntg-context
> wrote:
>
> Where is this message on luacondition 733 coming from? I would be glad to get
> rid of it. The message does not pinpoint the problem locatio
s.mkiv'
(\end occurred when luacondition 733 on line 8 was incomplete)
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl
Is it possible to retrieve the contents of a file directly into a buffer? On
the Wiki I could not find such a command. That is, equivalent to something like:
\startbuffer[from file]
contents of the file
\stopbuffer
dr. Hans van der Meer
nguishable. This is not always wanted, for example when one needs to
place either a nil or an empty string into a Lua table. I am running in trouble
when to t.key set to \Macro{} should become nil or when it should become "".
Is there some common understanding about how to handle this situation?
d
And in pathological cases where even this does not work (as I encountered a few
days ago):
\setbox\scratchbox=\vboxx{content}\ifdim\wd\scratchbox>\zeropoint .. \else ..
\fi
dr. Hans van der Meer
> On 2 Aug 2021, at 17:17, Hans Hagen via ntg-context
> wrote:
>
> On 8/2/2021
mentioned normal behaviour for english. That is [en] and [en-gb] produce the
day-month-year order and that [us] and [en-us] month-day-year.
dr. Hans van der Meer
___
If your question is of interest to others a
.
An option I would prefer for clarity, because now the order of calling
\language and \mainlanguage makes a difference.
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry
documents.
But maybe it is just an error in the distribution.
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl
I get the impression that \xmldisplayverbatim changes ' (apostroph) into
and " (quotation mark) into etc.
How can I get rid of this translation?
I would prefer to have typeset ' and " instead of the entity representations.
dr. Hans va
Found the problem: should not be preceded by \crlf but by \par.
dr. Hans van der Meer
> On 5 Jul 2021, at 19:21, Hans van der Meer wrote:
>
> I cannot get rid of the whiteline that \xmldisplayverbatim generates before
> its output. Changing to other \xmldisplay macro's di
out: no change
\xmldisplayverbatim{#1}
\stopxmlsetups
result, see the empty lines between abc and the \new..
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an en
in LuaTeX.
The lines with and >>>> directly come from print statements inserted in
the Lua code.
dr. Hans van der Meer
Open file in directory 1 and 2 levels deep - direct call succeeds
..io.open("events/hga-0372-345-62.xml","r")=>file (0x7fff97415f88)
...
. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma
In the following MWE for a textbackground the parameter backgroundoffset has the expected effect. But for positive values only. A backgroundoffset=-10pt has no visible effect.But the real problem is the parameter frameoffset. No effect at all, whatever frameoffset= is set to.
dr. Hans van der Meer
here. What?
\def\Macro{\dosingleargument\doMacro}
\def\doMacro[#1]#2{#1X#2}
The code below shows that it should be possible.
\startsection[title=\Macro{arg} no braces needed]\stopsection
\startsection[title={\Macro[arg1]{arg2} enclosed in braces}]\stopsection
\stoptext
dr. Hans van der Meer
scaling.pdf
Description: Adobe PDF document
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman
Thanks. This helps.
dr. Hans van der Meer
> On 30 May 2021, at 13:40, Adam Reviczky wrote:
>
> Hi Hans,
>
> Does this help:
> https://tex.stackexchange.com/questions/134474/context-part-chapter-section-and-subsection-names
>
> <https://tex.stackexchange.com/qu
With \pagenumber I can call up the current pagenumber and typeset it.
But \chapternumber is not defined.
How can I typeset the current chapternumber or even the current
chapternumber.sectionnumber.subsectionnumber, for example?
dr. Hans van der Meer
\crlf
ghi jkl xyz
\stopsubsection
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg
This macro \setupindentations is mentioned in my ConText the manual from
november 12, 2001.
It seems to have disappeared.
Is that so? Then why? What replacement?
dr. Hans van der Meer
___
If your question
What does it mean? Is there something I should do?
dr. Hans van der Meer
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.n
>> Is there a best practice for ConTeXt source files, at all?
Readable code is not just about formatting. Adding clear and complete comments
that document the code can be considered even more important.
dr. Hans van der Meer
> On 24 Apr 2021, at 13:55, Henning Hraban Ramm wrote:
&g
> Why tilde is displayed?
Wouldn't the simple answer not be: because XML is not TeX?
dr. Hans van der Meer
> On 21 Apr 2021, at 20:17, Jano Kula wrote:
>
> Dear list,
>
> first episode of series on nbsp of XML in lmtx.
> Unfortunately, not that catchy as Netflix.
>
Thanks. At least worked twice
met vriendelijke groet
dr. Hans van der Meer
> On 15 Apr 2021, at 11:45, Henning Hraban Ramm wrote:
>
>
>
>> Am 15.04.2021 um 10:26 schrieb Hans van der Meer :
>>
>> When running the command: context --autopdf --run myfile.tex
to the Preview
application.
It something wrong here? Is it not functional in MacOS? Am I missing some clue?
met vriendelijke groet
dr. Hans van der Meer
___
If your question is of interest to others as well, please add
Shouldn't it be \startitemize ? Or is there another problem?
dr. Hans van der Meer
> On 16 Nov 2020, at 14:29, Bertrand Masson wrote:
>
> Hello
> With the latest version of lmtx (ConTeXt ver: 2020.11.04 09:40 LMTX fmt:
> 2020.11.14) \ startitemeze [2] no longer works. Bullet
Of old I have found the wolf fence tactics useful: Put for example an X at the
beginning of a suspected section and somewhat further a Y. OIf they bracket the
culprit the offending space will be between them. Otherwise narrow the fence.
dr. Hans van der Meer
> On 29 Sep 2020, at 14:26, De
A possibility is saving the data as text in a Lua-table. If you are not afraid
to use some Lua, I can send my code for saving files and data for repeated use.
dr. Hans van der Meer
> On 18 Sep 2020, at 15:36, Denis Maier wrote:
>
> Hi,
>
> For typesetting XML I'm wondering ho
In Lua patterns % is a socalled magic character like ^$ etc. These are esacped
with a %. Thus %% is what you need in the first string.
dr. Hans van der Meer
> On 27 Aug 2020, at 17:11, Pablo Rodriguez wrote:
>
> Dear list,
>
> I have and \xmlraw command that gives some te
> It is because ffi is a multi-part ligature.
Indeed, of course. I am getting old, I fear. It kept me awake in bed yesterday
until I realised (far too late) it must be the ffi ligature.
dr. Hans van der Meer
> On 7 Aug 2020, at 09:29, Taco Hoekwater wrote:
>
>
>
>>
n to 'suff' and the message goes away.I have put the full set of files inside the zip.
dr. Hans van der Meer
\setupbodyfont[termes]\starttext%=ConTeXt versie \contextversion \crlf%
I didn't miss that argument, of course, my actual code was:
\margindata[outer][hoffset=\marginoffset]
dr. Hans van der Meer
> On 15 Jul 2020, at 22:10, Wolfgang Schuster
> wrote:
>
> Hans van der Meer schrieb am 15.07.2020 um 21:48:
>> Using the following:
>>
happens, I conclude that the result of the first expansion is lost
and is not carried into the actual placement of the marginnote.
The question this is: how to solve this problem?
dr. Hans van der Meer
___
If your
. An overfsight somewhere?
Below the last part of the context --make en run.
Mark the lang-mis.mkxl is not found line.
met vriendelijke groet
dr. Hans van der Meer
resolvers > lua > loading file
'/Users/hansm/TeX/context-lmtx/tex/texmf-context/tex/context/base/mkiv/node-bck.lua'
succeeded
there a remedy making these messages disappear from the log?
dr. Hans van der Meer
hbadness.tex
Description: Binary data
hbadness.pdf
Description: Adobe PDF document
___
If your question is of interest to others as well
\\currentdate
Neat solution, worked without a hitch. Now I have to remember this for future
use ...
dr. Hans van der Meer
> On 24 Jun 2020, at 21:10, Hans Hagen wrote:
>
> On 6/24/2020 9:00 PM, Hans van der Meer wrote:
>> How can the crash in the minimal example he
How can the crash in the minimal example here be explained? And is there a solution to avoid this and make the crash going away "without having to jump through special hoops"?
dr. Hans van der Meer
currentdate.pdf
Description: Adobe PDF document
currentdate.tex
Description: B
MLProcessBuffer{#1}%
% simply does an \xmlprocessbuffer{}{}{}
}
The following buffer gives the error:
\startbuffer[german]
\stopbuffer
\loadvocabularyfrombuffer{german}
But the others below are ok and load as expected.
\startbuffer[german]
\stopbuffer
and
\startbuffer[german]
\stop
Why can you not simply use one of the doifundefined macro's? Something for
example:
\doifundefined{ExitStatus}{\gdef\ExitStatus{0}} % default to ok as in UNIX
dr. Hans van der Meer
> On 18 Jun 2020, at 10:27, Lukas/ConTeXt wrote:
>
> Hello,
> I'm using Hans' macro suggested some
,%
...
]%
and I checked that it had the value: center.
But if you are interested, I can send you the module code.
dr. Hans van der Meer
> On 7 Jun 2020, at 12:20, Wolfgang Schuster
> wrote:
>
> Hans van der Meer schrieb am 07.06.2020 um 12:07:
>> A problem has arisen up since previo
box makes the error disappear.
Thanks for looking into it, because my work more or less depends on this code
working in good order.
dr. Hans van der Meer
___
If your question is of interest to others as well, please add
its definition
l.9 \margindata{
text1}% One has to use \margindata[]{test} to avoid the error.(2) \margindata[]{test} has spurious whitespace, \margindata[]{test}% must be used to avoid that.Below the minimal example and the output.
met vriendelijke groetdr. Hans van der M
te the pdf produced,
what is my intention in this case.
Is this an option or is there presently another (standard) procedure to
communicate from ConTeXt to the shell.
dr. Hans van der Meer
___
If your question is o
}% {\xmlcommand{#1}{.}{xmlcommon:checkxml}} % Execute this code if no error was found. etc.
dr. Hans van der Meer
\startluacode
-- Define our namespace as hvdm
hvdm = hvdm or {}
-- Function checks the correctness of an XML tree.
hvdm.checkXMLtree = function (xml, linesep
Lua strings can be split across lines by using so called long brackets
according to the Lua Reference Manual:
[[split
string]]
or (very first newline ignored):
[[
split
string]]
or with matched levels: [==[ ]==]
dr. Hans van der Meer
> On 19 Mar 2020, at 14:29, Aditya Mahajan wr
1 - 100 of 720 matches
Mail list logo