On Aug 16, 2017, at 3:27 AM, Song Teck wrote:
>
> How do I go about capturing the log?
You might want to discharge the battery most of the way to battery.charge.low
(5%, if it is similar to the other unit listed in the DDL) before switching to
debug mode, because it is
Hi Charles,
Ok, will try the ignore lb flag later. How do I go about capturing the log?
I might as well do it while testing the flag...
Cheers,
ST
On 15 August 2017 at 20:42, Charles Lepple wrote:
> On Aug 15, 2017, at 5:24 AM, Song Teck wrote:
> >
> >
On Aug 15, 2017, at 5:24 AM, Song Teck wrote:
>
> Hi Charles,
>
> Have managed to make some progress after a fashion. Got the unit to work on
> the jessie version of NUT (2.7.2). upsc does output the unit parameters,
> along with the mis-scaled voltage readings described
Hi Charles,
Have managed to make some progress after a fashion. Got the unit to work on
the jessie version of NUT (2.7.2). upsc does output the unit parameters,
along with the mis-scaled voltage readings described at
http://networkupstools.org/ddl/Mini-Box.com/OpenUPS2.html. Am now trying to
get
Hi Charles, Tim,
Ah, thanks for bit about the dependencies. Would have thought them to be
version specific.
Tried with the client and server debs but it seems too many dependency
differences between wheezy and jessie. I also tried upgrading from wheezy
to jessie wholesale to see if that worked
On Aug 3, 2017, at 5:35 AM, Song Teck wrote:
>
> That package is supposed to install both server and client (according to the
> description at https://packages.debian.org/stretch/nut anyway). I'll try both
> server and client individually later and see if that helps.
>
Hi Charles,
That package is supposed to install both server and client (according to
the description at https://packages.debian.org/stretch/nut anyway). I'll
try both server and client individually later and see if that helps.
Cheers,
ST
On 3 Aug 2017 7:26 a.m., "Charles Lepple"
On Aug 2, 2017, at 12:09 PM, Song Teck wrote:
>
> sudo dpkg -i nut_2.7.4-5_all.deb
> (Reading database ... 103447 files and directories currently installed.)
> Preparing to replace nut 2.6.4-2.3+deb7u1 (using nut_2.7.4-5_all.deb) ...
> Unpacking replacement nut ...
> Setting
This is probably just pathing issues . . . the .deb likely put the 2.7.4
distro in a different place, and if you can find it and run the newly
installed "upsdrvctl" instead of the old one, it may well work. That,
or deinstall the old version first, then install 2.7.4 cleanly . . .
- TIm
On
Hi Charles,
thanks for the clarification on the libusb. that indeed does work to get
the value in ./configure.
I've tried installing a .deb
sudo dpkg -i nut_2.7.4-5_all.deb
(Reading database ... 103447 files and directories currently installed.)
Preparing to replace nut 2.6.4-2.3+deb7u1 (using
On Aug 1, 2017, at 12:01 PM, Song Teck wrote:
>
> Hi Charles,
>
> Ok, I missed the absence from the backports as well. Again, some
> unfamiliarity here, so
>
> 1) I presume I cannot use a metapackage meant for jessie or stretch on
> wheezy? Or if I can, is there a way to
Hi Charles,
Ok, I missed the absence from the backports as well. Again, some
unfamiliarity here, so
1) I presume I cannot use a metapackage meant for jessie or stretch on
wheezy? Or if I can, is there a way to deploy it from console?
2) If not and I use the 2.7.4 tar found at
On Aug 1, 2017, at 7:56 AM, Song Teck Ng
wrote:
>
> Hi Charles,
>
> Thanks for your reply. So the Jessie or stretch versions will work then since
> those are 2.7.2 and 2.7.4...
>
> I will have to update my sources.list and follow this?
>
>
Hi Charles,
Thanks for your reply. So the Jessie or stretch versions will work then
since those are 2.7.2 and 2.7.4...
I will have to update my sources.list and follow this?
https://backports.debian.org/Instructions/
Will give it a go later and update either way.
Thanks,
ST
Via mobile
On 1
On Aug 1, 2017, at 3:14 AM, Song Teck Ng
wrote:
> 4) Have edited the ups.conf and nut.conf files with the necessary entries but
> trying to start the driver with upsdrvctl start gives:
> "Network UPS Tools - UPS driver controller 2.6.4
>
> Network UPS Tools -
15 matches
Mail list logo