What about the attached vnics?
Can you do:
dladm show-linkprop vnic# for the vnics connected to the etherstub? There
may be a maxbw setting ...
On Thu, Sep 14, 2017 at 9:41 AM, Dirk Willems
wrote:
> just execute => dladm create-etherstub Backend_Switch0
>
>
> and
just execute => dladm create-etherstub Backend_Switch0
and having => Backend_Switch0 etherstub 9000 up
On 14-09-17 18:26, Ian Kaufman wrote:
Networking has always used *bps - that's been the standard for many
years. Megabits, Gigabits ...
Disk tools have always measured in bytes since that
Networking has always used *bps - that's been the standard for many years.
Megabits, Gigabits ...
Disk tools have always measured in bytes since that is how the capacity is
defined.
How did you create your etherstub? I know you can set a maxbw (maximum
bandiwdth), but I don't know what the
Thank you all, the water is already clearing up :)
So infiniband is 40 Gbps an not 40GB/s, very confusing GB/s Gbps why
they not take a standaard and set everything in GB/s or MB/s ?
A lot of people make a lot of mistakes between them, me too ...
If it is 40 Gbps a factor of 8 then we
Some other things you need to take into account:
QDR Infiniband is 40Gbps, not 40GB/s. That is a factor of 8 difference.
That is also a theoretical maximum throughput, there is some overhead. In
reality, you will never see 40Gbps.
My system tested out at 6Gbps - 8Gbps using NFS over IPoIB, with
On September 14, 2017 2:26:13 PM GMT+02:00, Dirk Willems
wrote:
>Hello,
>
>
>I'm trying to understand something let me explain.
>
>
>Oracle always told to me that if you create a etherstub switch it has
>infiniband speed 40GB/s.
>
>But I have a customer running on
Here's a quick thought: if you are copying your files with scp, you might
be CPU bound because of all the crypto work. You should try to copy with a
much more CPU-lightweight tool. I personally usually use netcat for this
kind of stuff.
Just my 2 cents.
--
Ludovic
On Thu, Sep 14, 2017 at 2:26
Hello,
I'm trying to understand something let me explain.
Oracle always told to me that if you create a etherstub switch it has
infiniband speed 40GB/s.
But I have a customer running on Solaris (Yeah I know but let me
explain) who is copy from 1 NGZ to another NGZ on the same GZ over Lan