Hey all,
Wondering if you could verify with me the following information about the SMB
protocol within OmniOs.. Is it currently using SMBv1 as a standard i saw a
blog that discussed that doing further research it looks like SMBv3 or v2 is
not built into Omni at this time (you can tell me if
Hey All
I was wondering if someone who has been using IB in their lab has any good
advice for someone just starting to integrate IB into their ZFS environment. I
have Connect-X (HCA) Card put into the host ( i do have a CX3 but i have heard
its not natively supported and there were issues
Hey all,
I looked at some of the past notes on this but it looked like the discussion
tiered off and stopped. I was wondering if there was ever a resolution to the
Reboot hang issues with OMNI.
Running a SuperMicro Board 16GB Ram soon to be updated... my first thought is
it has something to
on the fritz...
Thanks!
Matt Mabis
From: Paul Henson paul.b.hen...@gmail.com on behalf of Paul B. Henson
hen...@acm.org
Sent: Wednesday, August 13, 2014 2:00 PM
To: Matthew Mabis
Cc: omnios-discuss@lists.omniti.com
Subject: Re: [OmniOS-discuss] SuperMicro
Message -
From: Matthew Mabis mma...@vmware.com
To: Gordon Ross gordon.r...@nexenta.com
Cc: develo...@lists.illumos.org, omnios-discuss
omnios-discuss@lists.omniti.com
Sent: Wednesday, May 7, 2014 8:01:55 AM
Subject: Re: [OmniOS-discuss] [developer] Kernel Panic - Possibly SMB?
I haven't
Hey All,
I was wondering if there is any news on if OmniOS will support VAAI Extensions
in the near future at all?
Matt Mabis
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
help would be greatly
appreciated!
Matt Mabis
- Original Message -
From: Gordon Ross gordon.r...@nexenta.com
To: Matthew Mabis mma...@vmware.com
Cc: develo...@lists.illumos.org, omnios-discuss
omnios-discuss@lists.omniti.com
Sent: Tuesday, May 6, 2014 9:07:23 AM
Subject: Re
Hey all wondering if someone could help me figure out what just happened, i had
a kernel panic that i dont understand what caused it based on what i see in the
stack it might have been SMB, if you need more like the dump file itself let me
know! Any help would greatly be appreciated!
Hey All,
I am debating the idea of just swapping all my hard drives in my current 8x2TB
RaidZ2 (all be it slowly) and let the environment resilver each drive than
expand versus creating a new RaidZ2 on a different box and cloning the data
over.
Obviously i know of the Pros/Cons/Risks
I know the drive itself does 512b emulation but i would rather run 4K if theres
a performance increase!
thanks
Matt
- Original Message -
From: Chris Siebenmann c...@cs.toronto.edu
To: Matthew Mabis mma...@vmware.com
Cc: omnios-discuss@lists.omniti.com
Sent: Friday, March 21, 2014
Running Mem-Test on it now to check if its memory issue
I will update with results when i have them..
Matt
- Original Message -
From: Dan McDonald dan...@omniti.com
To: Matthew Mabis mma...@vmware.com
Cc: Ben Summers b...@fluffy.co.uk, omnios-discuss
omnios-discuss@lists.omniti.com
Its an Intel 320 80GB Drive I ensured to buy SSDs for my lab that have the
power Caps didnt want to make that mistake!
Matt
- Original Message -
From: Doug Hughes d...@will.to
To: omnios-discuss@lists.omniti.com
Sent: Monday, February 3, 2014 7:34:29 AM
Subject: Re: [OmniOS-discuss]
Message -
From: Saso Kiselkov skiselkov...@gmail.com
To: omnios-discuss@lists.omniti.com
Sent: Monday, February 3, 2014 7:23:05 AM
Subject: Re: [OmniOS-discuss] Where to Run Omni
On 2/3/14, 3:06 PM, Matthew Mabis wrote:
Hello,
I have a few questions about a project that i am trying to work
Hey All
I am wondering if anyone has toyed with the idea of using a supermicro
A1SAI-2750F-O (
http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2750F.cfm ) with
the Avaton Chips in it for a ZFS platform... its got Quad Marvell Nics, IPMI,
ECC and decent amount of SATA onboard
I have been using a LSI 1068E card for a very long time (Multiple years) with
solaris foundations Pre-Omni... SOLID as a ROCK!
downside is that you cant have 2TB Drives with the LSI 1068E you would have to
get a LSI 2008 or better
Matt Mabis
Sr. Consultant PSO (End User Computing)
Hey All,
Was wondering where your stance is with vSphere 5.5 and Deploying OmniOS with
the issues i have seen so far i am having issues with the E1000 Nic where i
believe disabling TOE on the VM resolves the issue but i have heard of some
vmxnet3 issues with high CPU consumption as well.. Is
16 matches
Mail list logo