Re: A910 and boot_usb

2008-01-24 Thread Daniel Ribeiro
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Antonio Ospite wrote: Daniel Ribeiro proposed to move GPIO definitions to ezx-phone.c, what about factoring out the common definitions in a ezx-common.h and let the different parts go into ezx-phone.h ? Do you have any more thought about this

Re: A910 and boot_usb

2007-10-21 Thread Daniel Gimpelevich
On Tue, 16 Oct 2007 00:57:36 +, Daniel Gimpelevich wrote: Just tried this one: http://people.openezx.org/wyrm/images/20070930/zImage-2.6.21.4-ezxWM-20070930-a1200 No OpenEZX usplash, unlike the previous ones, and the dmesg text is still green, of course. The first part scrolls by too fast

Re: A910 and boot_usb

2007-10-21 Thread Daniel Ribeiro
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daniel Gimpelevich wrote: Here is a patch against the current SVN that reflects what I built: http://homepage.mac.com/danielg4/2066.patch Can someone please take a look to see how obvious what I did wrong might be? Thanks. Hi Daniel,

Re: A910 and boot_usb

2007-10-21 Thread Daniel Gimpelevich
On Sun, 21 Oct 2007 22:07:11 -0300, Daniel Ribeiro wrote: Hi Daniel, I think that what you are doing wrong is using a780 as base for your work, use a1200 instead. I'd love to, but there just isn't that much a1200 stuff in SVN. The a910 tarball Motorola released is full of #ifdef's for

Re: A910 and boot_usb

2007-10-16 Thread Daniel Gimpelevich
On Tue, 16 Oct 2007 09:01:07 +0200, Antonio Ospite wrote: This is a good news If the kernel complains about the root device it means the mmc device has been recognized. So it's time for you to buy an addidional MicroSD card and setup userspace software. You can try openmoko but it is

Re: A910 and boot_usb

2007-10-16 Thread Daniel Gimpelevich
On Tue, 16 Oct 2007 11:36:52 -0300, Daniel Ribeiro wrote: Most SD vendors ship the cards with *two* partition tables, one on the card itself, and another on the first partition. GPARTED failed to repartition my card, because it gets confused and uses the second partition table. Just to be

Re: A910 and boot_usb

2007-10-13 Thread Daniel Gimpelevich
On Wed, 06 Jun 2007 11:50:30 +0100, Paulo Marques wrote: Marc Bobillier wrote: * Daniel Ribeiro [2007-06-04 18:10:46 -0300]: A typo broke boot_usb for e2, e6, a1200 and a910. Its fixed on r2025, please try again. It boots now! I get a muticolor garbage screen, then tux logo and scrolling

Re: A910 and boot_usb

2007-06-06 Thread Marc Bobillier
* Paulo Marques [2007-06-06 11:50:30 +0100]: If you see green text messages you probably have the same problem I have with the ROKR E6: the framebuffer is 18bpp and not 16bpp. Yes, A910 is 256k colors. -- marc

A910 and boot_usb

2007-06-04 Thread marc
Hi all, Here is my attempt at booting a zImage on a A910 : # ./boot_usb zImage-2.6.13-ezx6-32mb-p1 E2/A1200/E6 found. TX: RQSN ( 02 52 51 53 4e 03) TX: RQVN ( 02 52 51 56 4e 03) TX: ADDRA0DEBA ( 02 41 44 44 52 1e 41 30 44 45 30 30 30 30 42 41 03) TX: JUMPA0DEBA ( 02 4a 55 4d 50 1e 41 30

Re: A910 and boot_usb

2007-06-04 Thread Daniel Ribeiro
Sorry, all my fault. A typo broke boot_usb for e2, e6, a1200 and a910. Its fixed on r2025, please try again. 2007/6/4, [EMAIL PROTECTED] [EMAIL PROTECTED]: Hi all, Here is my attempt at booting a zImage on a A910 : # ./boot_usb zImage-2.6.13-ezx6-32mb-p1 E2/A1200/E6 found. TX: RQSN ( 02 52 51