Hi,
I have read that we can set different drive capability for GPIO bits in
raspberry pi (from 2mA to 16 mA).
My JTAG target (actel igloo) for some reason has strong pull down
implemented (as advised in actel hardware example) on the tck and reset
lines (1k and 500 ohm...)
So it could be that
This is an automated email from Gerrit.
Paul Fertser (fercer...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/1630
-- gerrit
commit e8aa39df49c90ad658605b0c59adfbafca8b8f93
Author: Paul Fertser fercer...@gmail.com
Date: Wed Sep 18 13:48:21
I'm trying to hook up opened to TI's CC2538 Cortex-M3 SoC and it's not going
smooth.
Problem is that this device supports both 1149.1 and 1149.7 but default mode is
1149.7/cJTAG.
So to speak 1149.1 with this device special sequence needs to be sent to this
device to switch from cJTAG to JTAG
Hi,
On Wed, Sep 18, 2013 at 02:48:27PM +0200, Nicolas Produit wrote:
I have no idea where the person that wrote this document knows about that...
Gert van Loo can certainly be trusted here, good find!
Please try http://openocd.zylin.com/1633 and keep us updated about
your progress :)
--
Be
This is an automated email from Gerrit.
Paul Fertser (fercer...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/1633
-- gerrit
commit 68729ac9dafe2b20aaebf1bf6cfbb134daefd0b4
Author: Paul Fertser fercer...@gmail.com
Date: Wed Sep 18 23:42:50