Signed-off-by: Yegor Yefremov yegorsli...@googlemail.com
---
tcl/interface/jtagkey2.cfg |7 ++-
tcl/interface/jtagkey2p.cfg |7 ++-
2 files changed, 4 insertions(+), 10 deletions(-)
Index: b/tcl/interface/jtagkey2.cfg
Any objections?
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US toll free 1-866-980-3434 / International +47 51 87 40 27
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
___
Any objections?
Another option were to remove all jtagkey configuration files and
leave the jtagkey.cfg only.
Yegor
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
On Mon, Jun 6, 2011 at 9:24 AM, Yegor Yefremov
yegorsli...@googlemail.com wrote:
Any objections?
Another option were to remove all jtagkey configuration files and
leave the jtagkey.cfg only.
The description is different...
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US
On Mon, Jun 6, 2011 at 9:27 AM, Øyvind Harboe oyvind.har...@zylin.com wrote:
On Mon, Jun 6, 2011 at 9:24 AM, Yegor Yefremov
yegorsli...@googlemail.com wrote:
Any objections?
Another option were to remove all jtagkey configuration files and
leave the jtagkey.cfg only.
The description is
Am 06/06/2011 09:20 AM, schrieb Yegor Yefremov:
Signed-off-by: Yegor Yefremov yegorsli...@googlemail.com
---
tcl/interface/jtagkey2.cfg |7 ++-
tcl/interface/jtagkey2p.cfg |7 ++-
2 files changed, 4 insertions(+), 10 deletions(-)
Index: b/tcl/interface/jtagkey2.cfg
On Mon, Jun 6, 2011 at 9:32 AM, Michael Schwingen
rincew...@discworld.dascon.de wrote:
Am 06/06/2011 09:20 AM, schrieb Yegor Yefremov:
Signed-off-by: Yegor Yefremov yegorsli...@googlemail.com
---
tcl/interface/jtagkey2.cfg | 7 ++-
tcl/interface/jtagkey2p.cfg | 7 ++-
2
Hi,
We would like to add the configuration file for the stm32f2xxx to the GIT
repository.
Here is the file (should be named openocd/tcl/target/stm32f2xxx.cfg )
Thanks for adding this file.
Laurent
--
# script for stm32f2xxx
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
On Mon, Jun 6, 2011 at 10:11 AM, Yegor Yefremov
yegorsli...@googlemail.comwrote:
The only question is, what description has jtagkey-tiny Amontec
JTAGkey or Amontec JTAGkey-tiny?
My JTAGkey Tiny uses the string Amontec JTAGkey and indeed it works with
the jtagkey.cfg. Please also note that the
Any objections?
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US toll free 1-866-980-3434 / International +47 51 87 40 27
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
___
On Mon, Jun 6, 2011 at 11:10 AM, Laurent Charpentier laurent_p...@yahoo.com
wrote:
Hi,
We would like to add the configuration file for the stm32f2xxx to the GIT
repository.
Here is the file (should be named openocd/tcl/target/stm32f2xxx.cfg )
Thanks for adding this file.
Laurent
A patch
To create a patch:
git add tcl/tcl/target/stm32f2xxx.cfg
git commit
= write something like:
stm32f2xxx: config file
yyy
git format-patch HEAD^
Remove the below, it's just copy and paste junk.
# For more information about the configuration files, take a look at:
# openocd.texi
--
On Mon, Jun 6, 2011 at 11:23 AM, Øyvind Harboe oyvind.har...@zylin.comwrote:
To create a patch:
git add tcl/tcl/target/stm32f2xxx.cfg
Another minor thing I noticed now, why three x in the file name? And in the
flash driver too it seems? Shouldn't it be stm32f2xx?
(also, to avoid confusion,
Andreas,STM32F2 is referenced as stm32f2xxx (3 Xs) in the openocd project
(don't ask me why :).
for example:./src/flash/nor/stm32f2xxx.c./contrib/loaders/flash/stm32f2xxx.S
To make it consistent I kept the 3 Xs.Laurent
--- On Mon, 6/6/11, Andreas Fritiofson andreas.fritiof...@gmail.com wrote:
I added the tcl/target/stm32f2xxx.cfg file.
I changed the 128KB RAM size to 64KB according to Andreas' note.
L.
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
On Mon, Jun 6, 2011 at 11:40 AM, Andreas Fritiofson
andreas.fritiof...@gmail.com wrote:
On Mon, Jun 6, 2011 at 11:23 AM, Øyvind Harboe oyvind.har...@zylin.com
wrote:
To create a patch:
git add tcl/tcl/target/stm32f2xxx.cfg
Another minor thing I noticed now, why three x in the file name?
I also added the STM3220G-EVAL configuration file to
tcl/board/stm3220g_eval.cfg
# STM3220G-EVAL: This is an STM32F2 eval board with a single STM32F207IGT6
# (128KB) chip.
# http://www.st.com/internet/evalboard/product/250374.jsp
# increase working area to 128KB
set WORKAREASIZE
Hello!
I trying program PIC32 by openOCD 0.5.0 and jtagkey but i have some
problem:/
I run openOCD: openocd.exe -f interface/jtagkey.cfg -f target/pic32mx.cfg
and that is effect:
http://obrazki.elektroda.pl/1329039700_1306928501.jpg
Info: JTAG Tap: pic32mx.cpu tap/device found: 0x0430e053
Hello again :-)
I have reviewed the patch.
The old source code had 3 functions ft2232_init() that can call
ft2232_init_libftdi() or ft2232_init_ftd2xx() depending on a ft2232
ftdi communication library available. This is pretty simple and
coherent.
Yes simple, but bugged !!!
The new
Hi all,
I wonder if openOCD have support for Cortex-M0 ? We just started working
with NXP devices and I don't see any support for the M0 in the Openocd
script file.
Regards
Jonathan
___
Openocd-development mailing list
Tomek CEDRO wrote:
/ The new source code (after patching) have 6 functions doing almost
// the same: ft2232_init_ftd2xx(), ft2232_open_ftd2xx(),
// ft2232_init_libftdi(), ft2232_open_libftdi(), ft2232_init_sub(void),
// ft2232_init() and the header update ;-)
/
Student code galore.
Did
On Wed, Jun 1, 2011 at 9:23 PM, Peter Stuge peter at stuge.se
https://lists.berlios.de/mailman/listinfo/openocd-development wrote:
/ Indeed what you get with good use of goto. The rule is basically to
// only goto in the forward direction within a function. It's very
// simple, and it can make
Is this patch ready to be committed?
Any objections?
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US toll free 1-866-980-3434 / International +47 51 87 40 27
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
Laurent Gauch wrote:
Please just use goto to handle errors.
/*When we talk coding style with students, the first comment I have is :
DO NEVER USE GOTO STATEMENT BUT USE IF ELSE IF ...
I'm afraid that's not only doing your students a disservice, but also
their future employers.
Sometimes
Laurent Gauch wrote:
out - of - topic.
Sorry, but please comment the patch instead to talk about coding
style, or please start a new thread.
It is not off topic just because you think so.
This discussion is a direct result of the patch that was sent, and it
should be clear from the comments
Hi!
New version of OpenOCD should be available on my website soon - we just
have to get rid of some compilation errors...
https://lists.berlios.de/pipermail/openocd-development/2011-June/019260.html
4\/3!!
___
Openocd-development mailing list
On 2011-06-06 14:17, Jonathan Dumaresq wrote:
I wonder if openOCD have support for Cortex-M0 ? We just started working
with NXP devices and I don’t see any support for the M0 in the Openocd
script file…
OpenOCD currently does not support SWD (only JTAG), thus it cannot
support Cortex-M0. I
On Mon, Jun 6, 2011 at 3:35 PM, Øyvind Harboe oyvind.har...@zylin.comwrote:
Is this patch ready to be committed?
Any objections?
It doesn't build. Leftover variable no longer used.
Apart from that it seems OK from my limited review. I could agree with the
others that it looks like a
Hello Laurent,
Sorry if my comment seems not meritoric, I am not mentioning about
coding style because this leaves a lot to tell in case of all program
source tree. I am not advanced OpenOCD developer, I am learning code
internals for some time and I have some grasp on it already (enough to
Am 06/06/2011 01:44 PM, schrieb Laurent Gauch:
If our ft2232.c patches are not merged quickly, Amontec Team will
certainly come with a new specific jtagkey.c API driver instead of
the ft2232.c JTAG driver.
The advantage with a specific Amontec JTAGkey API driver in openocd,
will be to see
Am 06/06/2011 02:10 PM, schrieb Laurent Gauch:
Yes, this is to decouple the open and init (open the handle, init
the associated specific layout).
Is there case where open is used without init, or init without open?
Otherwise, this is just unnecessarily complex.
(more smaller function ...
On Mon, Jun 6, 2011 at 11:44 AM, Laurent Gauch
laurent.ga...@amontec.com wrote:
If our ft2232.c patches are not merged quickly, Amontec Team will certainly
come with a new specific jtagkey.c API driver instead of the ft2232.c JTAG
driver.
The advantage with a specific Amontec JTAGkey API
On 06/06/2011 12:01, Mateusz Baran wrote:
Hello!
I trying program PIC32 by openOCD 0.5.0 and jtagkey but i have some
problem:/
I run openOCD: openocd.exe -f interface/jtagkey.cfg -f target/pic32mx.cfg
and that is effect:
http://obrazki.elektroda.pl/1329039700_1306928501.jpg
Info: JTAG Tap:
On 06/06/2011 18:00, Mahavir Jain wrote:
Hi,
I am trying to program STM3210e-eval board with external CFI flash of
16MiB (sector size 128KiB) using openocd from latest git master branch.
I am not able to write to flash getting following error,
flash write_bank 1 /tmp/helloworld_flash.bin 0
34 matches
Mail list logo